Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSpin-Orbit-Torque Driven Propagating Spin Waves
205
0
0.0
(
0
)
Added by
Himanshu Fulara Dr.
Publication date
2019
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Spin-orbit torque (SOT) can drive sustained spin wave (SW) auto-oscillations in a class of emerging microwave devices known as spin Hall nano-oscillators (SHNOs), which have highly non-linear properties governing robust mutual synchronization at frequencies directly amenable to high-speed neuromorphic computing. However, all demonstrations have relied on localized SW modes interacting through dipolar coupling and/or direct exchange. As nanomagnonics requires propagating SWs for data transfer, and additional computational functionality can be achieved using SW interference, SOT driven propagating SWs would be highly advantageous. Here, we demonstrate how perpendicular magnetic anisotropy can raise the frequency of SOT driven auto-oscillations in magnetic nano-constrictions well above the SW gap, resulting in the efficient generation of field and current tunable propagating SWs. Our demonstration greatly extends the functionality and design freedom of SHNOs enabling long range SOT driven SW propagation for nanomagnonics, SW logic, and neuro-morphic computing, directly compatible with CMOS technology.
rate research
Read More
Reducing energy dissipation while increasing speed in computation and memory is a long-standing challenge for spintronics research. In the last 20 years, femtosecond lasers have emerged as a tool to control the magnetization in specific magnetic materials at the picosecond timescale. However, the use of ultrafast optics in integrated circuits and memories would require a major paradigm shift. An ultrafast electrical control of the magnetization is far preferable for integrated systems. Here we demonstrate reliable and deterministic control of the out-of-plane magnetization of a 1 nm-thick Co layer with single 6 ps-wide electrical pulses that induce spin-orbit torques on the magnetization. We can monitor the ultrafast magnetization dynamics due to the spin-orbit torques on sub-picosecond timescales, thus far accessible only by numerical simulations. Due to the short duration of our pulses, we enter a counter-intuitive regime of switching where heat dissipation assists the reversal. Moreover, we estimate a low energy cost to switch the magnetization, projecting to below 1fJ for a (20 nm)^3 cell. These experiments prove that spintronic phenomena can be exploited on picosecond time-scales for full magnetic control and should launch a new regime of ultrafast spin torque studies and applications.
This paper introduces the concept of spin-orbit-torque-MRAM (SOT-MRAM) based physical unclonable function (PUF). The secret of the PUF is stored into a random state of a matrix of perpendicular SOT-MRAMs. Here, we show experimentally and with micromagnetic simulations that this random state is driven by the intrinsic nonlinear dynamics of the free layer of the memory excited by the SOT. In detail, a large enough current drives the magnetization along an in-plane direction. Once the current is removed, the in-plane magnetic state becomes unstable evolving towards one of the two perpendicular stable configurations randomly. In addition, an hybrid CMOS/spintronics model is used to evaluate the electrical characteristics of a PUF realized with an array of 16x16 SOT-MRAM cells. Beyond robustness against voltage and temperature variations, hardware authentication based on this PUF scheme has additional advantages over other PUF technologies such as non-volatility (no power consumption in standby mode), reconfigurability (the secret can be rewritten), and scalability. We believe that this work is a step forward the design of spintronic devices for application in security.
We report on investigation of spin Hall magnetoresistance sensor based on NiFe/AuxPt1-x bilayers. Compared to NiFe/Pt, the NiFe/AuxPt1-x sensor exhibits a much lower power consumption (reduced by about 57%), due to 80% enhancement of spin-orbit torque efficiency of AuxPt1-x at an optimum composition of x = 0.19 as compared to pure Pt. The enhanced spin-orbit torque efficiency allows to increase the thickness of NiFe from 1.8 nm to 2.5 nm without significantly increasing the power consumption. We show that, by increasing the NiFe thickness, we were able to improve the working field range (0.86 Oe), operation temperature range (150 degree C) and detectivity (0.71 nT/sqrt(Hz) at 1 Hz) of the sensor, which is important for practical applications.
As spin-orbit-torque magnetic random-access memory (SOT-MRAM) is gathering great interest as the next-generation low-power and high-speed on-chip cache memory applications, it is critical to analyze the magnetic tunnel junction (MTJ) properties needed to achieve sub-ns, and ~fJ write operation when integrated with CMOS access transistors. In this paper, a 2T-1MTJ cell-level modeling framework for in-plane type Y SOT-MRAM suggests that high spin Hall conductivity and moderate SOT material sheet resistance are preferred. We benchmark write energy and speed performances of type Y SOT cells based on various SOT materials experimentally reported in the literature, including heavy metals, topological insulators and semimetals. We then carry out detailed benchmarking of SOT material Pt, beta-W, and BixSe(1-x) with different thickness and resistivity. We further discuss how our 2T-1MTJ model can be expanded to analyze other variations of SOT-MRAM, including perpendicular (type Z) and type X SOT-MRAM, two-terminal SOT-MRAM, as well as spin-transfer-torque (STT) and voltage-controlled magnetic anisotropy (VCMA)-assisted SOT-MRAM. This work will provide essential guidelines for SOT-MRAM materials, devices, and circuits research in the future.
Current induced spin-orbit torques (SOTs) in Fe/Pt bilayers have been investigated utilizing the spin-orbit torque ferromagnetic resonance (SOT-FMR) measurement. Characterization of thin films with different thicknesses indicates existence of a sizable field-like spin-orbit torque competing with the Oersted field induced torque (Oersted torque). The field-like torque is neglected in the standard SOT-FMR method and the presence of a strong field-like torque makes estimation of the spin Hall angle (SHA) problematic. Also, it is challenging to differentiate the field-like torque from the Oersted torque in a radiofrequency measurement. Based on the thickness dependence of field-like torque, anti-damping torque, and Oersted torque, the thickness-dependent SOT-FMR measurement is proposed as a more reliable, self-calibrated approach for characterization of spin-orbit torques.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
