Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInfrared Laser Locking to Rubidium Saturated Absorption Spectrum via a Photonic Chip Frequency Doubler
64
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Photonic integrated resonators stand out as reliable frequency converters due to their compactness and stability, with second-harmonic generation (SHG) efficiencies of up to 17000%/W reported recently in aluminum nitride microrings. In this work, a sufficiently strong second-harmonic (SH) signal up to microwatts was generated by a photonic integrated frequency doubler using a milliwatt infrared (IR) laser source. Furthermore, increased SHG bandwidth covering $^{85}$Rb and $^{87}$Rb D$_2$ transition lines as well as saturated absorption spectroscopy (SAS) were demonstrated by tuning the pump power and chip temperature. Here, we present, to the best of our knowledge, the first successful locking of an IR laser to Rb saturated absorption lines via a photonic chip frequency doubler.
rate research
Read More
The road towards the realization of quantum cascade laser (QCL) frequency combs (QCL-combs) has undoubtedly attracted ubiquitous attention from the scientific community, as these devices promise to deliver all-in-one (i.e. a single, miniature, active devices) frequency comb (FC) synthesizers in a range as wide as QCL spectral coverage itself (from about 4 microns to the THz range), with the unique possibility to tailor their spectral emission by band structure engineering. For these reasons, vigorous efforts have been spent to characterize the emission of four-wave-mixing multi-frequency devices, aiming to seize their functioning mechanisms. However, up to now, all the reported studies focused on free-running QCL-combs, eluding the fundamental ingredient that turns a FC into a useful metrological tool. For the first time we have combined mode-locked multi-frequency QCL emitters with full phase stabilization and independent control of the two FC degrees of freedom. At the same time, we have introduced the Fourier transform analysis of comb emission (FACE) technique, used for measuring and simultaneously monitoring the Fourier phases of the QCL-comb modes. The demonstration of tailored-emission, miniaturized, electrically-driven, mid-infrared/THz coverage, fully-stabilized and fully-controlled QCL-combs finally enables this technology for metrological-grade applications triggering a new scientific leap affecting several fields ranging from everyday life to frontier-research.
We report on an ultralow noise optical frequency transfer from a remotely located Sr optical lattice clock laser to a Ti:Sapphire optical frequency comb through telecom-wavelength optical fiber networks. The inherent narrow linewidth of the Ti:Sapphire optical frequency comb eliminates the need for a local reference high-finesse cavity. The relative fractional frequency instability of the optical frequency comb with respect to the remote optical reference was $6.7(1) times 10^{-18}$ at 1 s and $1.05(3) times 10^{-19}$ at 1,000 s including a 2.9 km-long fiber network. This ensured the optical frequency comb had the same precision as the optical standard. Our result paves the way for ultrahigh-precision spectroscopy and conversion of the highly precise optical frequency to radio frequencies in a simpler setup.
We report long-term laser frequency stabilization using only the target laser and a pair of 5 m fiber interferometers, one as a frequency reference and the second as a sensitive thermometer to stabilize the frequency reference. When used to stabilize a distributed feedback laser at 795 nm, the frequency Allan deviation at 1000 s drops from 5.6*10^{-8} to 6.9*10^{-10}. The performance equals that of an offset lock employing a second, atom-stabilized laser in the temperature control.
We present a new method for accurate mid-infrared frequency measurements and stabilization to a near-infrared ultra-stable frequency reference, transmitted with a long-distance fibre link and continuously monitored against state-of-the-art atomic fountain clocks. As a first application, we measure the frequency of an OsO4 rovibrational molecular line around 10 $mu$m with a state-of-the-art uncertainty of 8x10-13. We also demonstrate the frequency stabilization of a mid-infrared laser with fractional stability better than 4x10-14 at 1 s averaging time and a line-width below 17 Hz. This new stabilization scheme gives us the ability to transfer frequency stability in the range of 10-15 or even better, currently accessible in the near-infrared or in the visible, to mid-infrared lasers in a wide frequency range.
Full phase control of THz emitting quantum cascade laser (QCL) combs has recently been demonstrated, opening new perspectives for even the most demanding applications. In this framework, simplifying the set-ups for control of these devices will help to accelerate their spreading in many fields. We report a new way to control the emission frequencies of a THz QCL comb by small optical frequency tuning (SOFT), using a very simple experimental setup, exploiting the incoherent emission of an ordinary white light emitting diode. The slightly perturbative regime accessible in these condition allows tweaking the complex refractive index of the semiconductor without destabilizing the broadband laser gain. The SOFT actuator is characterized and compared to another actuator, the QCL driving current. The suitability of this additional degree of freedom for frequency and phase stabilization of a THz QCL comb is shown and perspectives are discussed.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
