Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSequence-Based OOK for Orthogonal Multiplexing of Wake-up Radio Signals and OFDM Waveforms
92
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this study, we propose an approach to constructing on-off keying (OOK) symbols for wake-up radios (WURs) by using sequences in the frequency domain. The proposed method enables orthogonal multiplexing of wake-up signals (WUSs) and orthogonal frequency division multiplexing (OFDM) waveforms. We optimize the sequences with a tractable algorithm by considering the reliability of WUSs in fading channels. The proposed algorithm relies on an alternating minimization technique, i.e. cyclic algorithm-new (CAN), which was originally proposed for obtaining a unimodular sequence with good aperiodic correlation properties. In this study, we extend CAN to generate OOK waveforms with Manchester coding. We demonstrate the performance of four optimized sequences and compare with state-of-the-art approaches. We show that the proposed scheme improves the wake-up radio receiver (WURx) performance by controlling the energy distribution in frequency domain while removing the interference-floor at the OFDM receiver.
rate research
Read More
The peak-to-average-power ratio (PAPR) of the frequency domain multiplexed wake-up signals (WUSs) specified in IEEE P802.11ba can be very large and difficult to manage since it depends on the number and allocation of the active channels, and the data rate on each channel. To address this issue, we propose a transmission scheme based on complementary sequences (CSs) for multiple WUSs multiplexed in the frequency domain. We discuss how to construct CSs compatible with the framework of IEEE P802.11ba by exploiting a recursive Golay complementary pair (GCP) construction to reduce the instantaneous power fluctuations in time. We compare the proposed scheme with the other options under a non-linear power amplifier (PA) distortion. Numerical results show that the proposed scheme can lower the PAPR of the transmitted signal in frequency division multiple access (FDMA) scenarios more than 3 dB and yields a superior error rate performance under severe PA distortion.
In this study, we propose a framework for chirp-based communications by exploiting discrete Fourier transform-spread orthogonal frequency division multiplexing (DFT-s-OFDM). We show that a well-designed frequency-domain spectral shaping (FDSS) filter for DFT-s-OFDM can convert its single-carrier nature to a linear combination of chirps circularly translated in the time domain. Also, by exploiting the properties of the Fourier series and Bessel function of the first kind, we analytically obtain the FDSS filter for an arbitrary chirp. We theoretically show that the chirps with low ripples in the frequency domain result in a lower bit-error ratio (BER) via less noise enhancement. We also address the noise enhancement by exploiting the repetitions in the frequency. The proposed framework offers a new way to efficiently synthesize chirps that can be used in Internet-of-Things (IoT), dual-function radar and communication (DFRC) or wireless sensing applications with existing DFT-s-OFDM transceivers.
The optical wireless communication (OWC) with the intensity modulation (IM), requires the modulated radio frequency (RF) signal to be real and non-negative. To satisfy the requirements, this paper proposes two types of mixed orthogonal frequency division multiplexing (X-OFDM) waveform. The Hermitian symmetry (HS) character of the sub-carriers in the frequency domain, guarantees the signal in the time domain to be real, which reduces the spectral efficiency to $1/2$. For the odd sub-carriers in the frequency domain, the signal in the time domain after the inverse fast fourier transform (IFFT) is antisymmetric. For the even sub-carriers in the frequency domain, the signal in the time domain after the IFFT is symmetric. Based on the antisymmetric and symmetric characters, the two types of X-OFDM waveform are designed to guarantee the signal in the time domain to be non-negative, where the direct current (DC) bias is not needed. With $N$ sub-carriers in the frequency domain, the generated signal in the time domain has $3N/2$ points, which further reduces the spectral efficiency to $1/3 = 1/2 times 2/3$. The numerical simulations show that, the two types of X-OFDM waveform greatly enhance the power efficiency considering the OWC channel with the signal-dependent noise and/or the signal-independent noise.
A novel intercarrier interference (ICI)-aware orthogonal frequency division multiplexing (OFDM) channel estimation network ICINet is presented for rapidly time-varying channels. ICINet consists of two components: a preprocessing deep neural subnetwork (PreDNN) and a cascaded residual learning-based neural subnetwork (CasResNet). By fully taking into account the impact of ICI, the proposed PreDNN first refines the initial channel estimates in a subcarrier-wise fashion. In addition, the CasResNet is designed to further enhance the estimation accuracy. The proposed cascaded network is compatible with any pilot patterns and robust against mismatched system configurations. Simulation results verify the superiority of ICINet over existing networks in terms of better performance and much less complexity.
This article proposes a novel framework for unmaned aerial vehicle (UAV) networks with massive access capability supported by non-orthogonal multiple access (NOMA). In order to better understand NOMA enabled UAV networks, three case studies are carried out. We first provide performance evaluation of NOMA enabled UAV networks by adopting stochastic geometry to model the positions of UAVs and ground users. Then we investigate the joint trajectory design and power allocation for static NOMA users based on a simplified two-dimensional (2D) model that UAV is flying around at fixed height. As a further advance, we demonstrate the UAV placement issue with the aid of machine learning techniques when the ground users are roaming and the UAVs are capable of adjusting their positions in three-dimensions (3D) accordingly. With these case studies, we can comprehensively understand the UAV systems from fundamental theory to practical implementation.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
