Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTwo-terminal spin-orbit torque magnetoresistive random access memory
222
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Spin-transfer torque magnetoresistive random access memory (STT-MRAM) is an attractive alternative to current random access memory technologies due to its non-volatility, fast operation and high endurance. STT-MRAM does though have limitations including the stochastic nature of the STT-switching and a high critical switching current, which makes it unsuitable for ultrafast operation at nanosecond and sub-nanosecond regimes. Spin-orbit torque (SOT) switching, which relies on the torque generated by an in-plane current, has the potential to overcome these limitations. However, SOT-MRAM cells studied so far use a three-terminal structure in order to apply the in-plane current, which increases the size of the cells. Here we report a two-terminal SOT-MRAM cell based on a CoFeB/MgO magnetic tunnel junction pillar on an ultrathin and narrow Ta underlayer. In this device, an in-plane and out-of-plane current are simultaneously generated upon application of a voltage, and we demonstrate that the switching mechanism is dominated by SOT. We also compare our device to a STT-MRAM cell built with the same architecture and show that critical write current in the SOT-MRAM cell is reduced by more than 70%.
rate research
Read More
Voltage-gate assisted spin-orbit torque (VGSOT) writing scheme combines the advantages from voltage control of magnetic anisotropy (VCMA) and spin-orbit torque (SOT) effects, enabling multiple benefits for magnetic random access memory (MRAM) applications. In this work, we give a complete description of VGSOT writing properties on perpendicular magnetic tunnel junction (pMTJ) devices, and we propose a detailed methodology for its electrical characterization. The impact of gate assistance on the SOT switching characteristics are investigated using electrical pulses down to 400ps. The VCMA coefficient ({xi}) extracted from current switching scheme is found to be the same as that from the magnetic field switch method, which is in the order of 15fJ/Vm for the 80nm to 150nm devices. Moreover, as expected from the pure electronic VCMA effect, {xi} is revealed to be independent of the writing speed and gate length. We observe that SOT switching current characteristics are modified linearly with gate voltage (V_g), similar as for the magnetic properties. We interpret this linear behavior as the direct modification of perpendicular magnetic anisotropy (PMA) and nucleation energy induced by VCMA. At V_g = 1V, the SOT write current is decreased by 25%, corresponding to a 45% reduction in total energy down to 30fJ/bit at 400ps speed for the 80nm devices used in this study. Further, the device-scaling criteria are proposed, and we reveal that VGSOT scheme is of great interest as it can mitigate the complex material requirements of achieving high SOT and VCMA parameters for scaled MTJs. Finally, how that VGSOT-MRAM can enable high-density arrays close to two terminal geometries, with high-speed performance and low-power operation, showing great potential for embedded memories as well as in-memory computing applications at advanced technology nodes.
As spin-orbit-torque magnetic random-access memory (SOT-MRAM) is gathering great interest as the next-generation low-power and high-speed on-chip cache memory applications, it is critical to analyze the magnetic tunnel junction (MTJ) properties needed to achieve sub-ns, and ~fJ write operation when integrated with CMOS access transistors. In this paper, a 2T-1MTJ cell-level modeling framework for in-plane type Y SOT-MRAM suggests that high spin Hall conductivity and moderate SOT material sheet resistance are preferred. We benchmark write energy and speed performances of type Y SOT cells based on various SOT materials experimentally reported in the literature, including heavy metals, topological insulators and semimetals. We then carry out detailed benchmarking of SOT material Pt, beta-W, and BixSe(1-x) with different thickness and resistivity. We further discuss how our 2T-1MTJ model can be expanded to analyze other variations of SOT-MRAM, including perpendicular (type Z) and type X SOT-MRAM, two-terminal SOT-MRAM, as well as spin-transfer-torque (STT) and voltage-controlled magnetic anisotropy (VCMA)-assisted SOT-MRAM. This work will provide essential guidelines for SOT-MRAM materials, devices, and circuits research in the future.
Magnetic random access memory schemes employing magnetoelectric coupling to write binary information promise outstanding energy efficiency. We propose and demonstrate a purely antiferromagnetic magnetoelectric random access memory (AF-MERAM) that offers a remarkable 50 fold reduction of the writing threshold compared to ferromagnet-based counterparts, is robust against magnetic disturbances and exhibits no ferromagnetic hysteresis losses. Using the magnetoelectric antiferromagnet Cr2O3, we demonstrate reliable isothermal switching via gate voltage pulses and all-electric readout at room temperature. As no ferromagnetic component is present in the system, the writing magnetic field does not need to be pulsed for readout, allowing permanent magnets to be used. Based on our prototypes of these novel systems, we construct a comprehensive model of the magnetoelectric selection mechanism in thin films of magnetoelectric antiferromagnets. We identify that growth induced effects lead to emergent ferrimagnetism, which is detrimental to the robustness of the storage. After pinpointing lattice misfit as the likely origin, we provide routes to enhance or mitigate this emergent ferrimagnetism as desired. Beyond memory applications, the AF-MERAM concept introduces a general all-electric interface for antiferromagnets and should find wide applicability in purely antiferromagnetic spintronics devices.
Spin-orbit torques (SOTs), which rely on spin current generation from charge current in a nonmagnetic material, promise an energy-efficient scheme for manipulating magnetization in magnetic devices. A critical topic for spintronic devices using SOTs is to enhance the charge to spin conversion efficiency. Besides, the current-induced spin polarization is usually limited to in-plane, whereas out-of-plane spin polarization could be favored for efficient perpendicular magnetization switching. Recent advances in utilizing two important classes of van der Waals materials$-$topological insulators and transition-metal dichalcogenides$-$as spin sources to generate SOT shed light on addressing these challenges. Topological insulators such as bismuth selenide have shown a giant SOT efficiency, which is larger than those from three-dimensional heavy metals by at least one order of magnitude. Transition-metal dichalcogenides such as tungsten telluride have shown a current-induced out-of-plane spin polarization, which is allowed by the reduced symmetry. In this review, we use symmetry arguments to predict and analyze SOTs in van der Waal material-based heterostructures. We summarize the recent progress of SOT studies based on topological insulators and transition-metal dichalcogenides and show how these results are in line with the symmetry arguments. At last, we identify unsolved issues in the current studies and suggest three potential research directions in this field.
We use three-terminal magnetic tunnel junctions (MTJs) designed for field-free switching by spin-orbit torques (SOTs) to systematically study the impact of dual voltage pulses on the switching performances. We show that the concurrent action of an SOT pulse and an MTJ bias pulse allows for reducing the critical switching energy below the level typical of spin transfer torque while preserving the ability to switch the MTJ on the sub-ns time scale. By performing dc and real-time electrical measurements, we discriminate and quantify three effects arising from the MTJ bias: the voltage-controlled change of the perpendicular magnetic anisotropy, current-induced heating, and the spin transfer torque. The experimental results are supported by micromagnetic modeling. We observe that, depending on the pulse duration and the MTJ diameter, different effects take a lead in assisting the SOTs in the magnetization reversal process. Finally, we present a compact model that allows for evaluating the impact of each effect due to the MTJ bias on the critical switching parameters. Our results provide input to optimize the switching of three-terminal devices as a function of time, size, and material parameters.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
