Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userNoncoherent Detection for Physical-Layer Network Coding
157
0
0.0
(
0
)
Added by
Zhaorui Wang
Publication date
2018
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
This paper investigates noncoherent detection in a two-way relay channel operated with physical layer network coding (PNC), assuming FSK modulation and short-packet transmissions. For noncoherent detection, the detector has access to the magnitude but not the phase of the received signal. For conventional communication in which a receiver receives the signal from a transmitter only, the phase does not affect the magnitude, hence the performance of the noncoherent detector is independent of the phase. PNC, however, is a multiuser system in which a receiver receives signals from multiple transmitters simultaneously. The relative phase of the signals from different transmitters affects the received signal magnitude through constructive-destructive interference. In particular, for good performance, the noncoherent detector in PNC must take into account the influence of the relative phase on the signal magnitude. Building on this observation, this paper delves into the fundamentals of PNC noncoherent detector design. To avoid excessive overhead, we do away from preambles. We show how the relative phase can be deduced directly from the magnitudes of the received data symbols. Numerical results show that our detector performs nearly as well as a fictitious optimal detector that has perfect knowledge of the channel gains and relative phase.
rate research
Read More
This paper investigates coherent detection for physical-layer network coding (PNC) with short packet transmissions in a two-way relay channel (TWRC). PNC turns superimposed EM waves into network-coded messages to improve throughput in a relay system. To achieve this, accurate channel information at the relay is a necessity. Much prior work applies preambles to estimate the channel. For long packets, the preamble overhead is low because of the large data payload. For short packets, that is not the case. To avoid excessive overhead, we consider a set-up in which short packets do not have preambles. A key challenge is how the relay can estimate the channel and detect the network-coded messages jointly based on the received signals from the two end users. We design a coherent detector that makes use of a belief propagation (BP) algorithm to do so. For concreteness, we focus on frequency-shift-keying (FSK) modulation. We show how the BP algorithm can be simplified and made practical with Gaussian-mixture passing. In addition, we demonstrate that prior knowledge on the channel distribution is not needed with our framework. Benchmarked against the detector with prior knowledge of the channel distribution, numerical results show that our detector can have nearly the same performance without such prior knowledge.
Leveraging recent progress in physical-layer network coding we propose a new approach to random access: When packets collide, it is possible to recover a linear combination of the packets at the receiver. Over many rounds of transmission, the receiver can thus obtain many linear combinations and eventually recover all original packets. This is by contrast to slotted ALOHA where packet collisions lead to complete erasures. The throughput of the proposed strategy is derived and shown to be significantly superior to the best known strategies, including multipacket reception.
This paper investigates the application of physical-layer network coding (PNC) to Industrial Internet-of-Things (IIoT) where a controller and a robot are out of each others transmission range, and they exchange messages with the assistance of a relay. We particularly focus on a scenario where the controller has more transmitted information, and the channel of the controller is stronger than that of the robot. To reduce the communication latency, we propose an asymmetric transmission scheme where the controller and robot transmit different amount of information in the uplink of PNC simultaneously. To achieve this, the controller chooses a higher order modulation. In addition, the both users apply channel codes to guarantee the reliability. A problem is a superimposed symbol at the relay contains different amount of source information from the two end users. It is thus hard for the relay to deduce meaningful network-coded messages by applying the current PNC decoding techniques which require the end users to transmit the same amount of information. To solve this problem, we propose a lattice-based scheme where the two users encode-and-modulate their information in lattices with different lattice construction levels. Our design is versatile on that the two end users can freely choose their modulation orders based on their channel power, and the design is applicable for arbitrary channel codes.
In this paper we introduce Neural Network Coding(NNC), a data-driven approach to joint source and network coding. In NNC, the encoders at each source and intermediate node, as well as the decoder at each destination node, are neural networks which are all trained jointly for the task of communicating correlated sources through a network of noisy point-to-point links. The NNC scheme is application-specific and makes use of a training set of data, instead of making assumptions on the source statistics. In addition, it can adapt to any arbitrary network topology and power constraint. We show empirically that, for the task of transmitting MNIST images over a network, the NNC scheme shows improvement over baseline schemes, especially in the low-SNR regime.
Slotted ALOHA can benefit from physical-layer network coding (PNC) by decoding one or multiple linear combinations of the packets simultaneously transmitted in a timeslot, forming a system of linear equations. Different systems of linear equations are recovered in different timeslots. A message decoder then recovers the original packets of all the users by jointly solving multiple systems of linear equations obtained over different timeslots. We propose the batched BP decoding algorithm that combines belief propagation (BP) and local Gaussian elimination. Compared with pure Gaussian elimination decoding, our algorithm reduces the decoding complexity from cubic to linear function of the number of users. Compared with the ordinary BP decoding algorithm for low-density generator-matrix codes, our algorithm has better performance and the same order of computational complexity. We analyze the performance of the batched BP decoding algorithm by generalizing the tree-based approach and provide an approach to optimize the system performance.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
