Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAn accurate centroid algorithm for PSF reconstruction
118
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this work, we present a novel centroiding method based on Fourier space Phase Fitting(FPF) for Point Spread Function(PSF) reconstruction. We generate two sets of simulations to test our method. The first set is generated by GalSim with elliptical Moffat profile and strong anisotropy which shifts the center of the PSF. The second set of simulation is drawn from CFHT i band stellar imaging data. We find non-negligible anisotropy from CFHT stellar images, which leads to $sim$0.08 scatter in unit of pixels using polynomial fitting method Vakili and Hogg (2016). And we apply FPF method to estimate the centroid in real space, this scatter reduces to $sim$0.04 in SNR=200 CFHT like sample. In low SNR (50 and 100) CFHT like samples, the background noise dominates the shifting of the centroid, therefore the scatter estimated from different methods are similar. We compare polynomial fitting and FPF using GalSim simulation with optical anisotropy. We find that in all SNR$sim$50, 100 and 200) samples, FPF performs better than polynomial fitting by a factor of $sim$3. In general, we suggest that in real observations there are anisotropy which shift the centroid, and FPF method is a better way to accurately locate it.
rate research
Read More
Faraday tomography offers crucial information on the magnetized astronomical objects, such as quasars, galaxies, or galaxy clusters, by observing its magnetoionic media. The observed linear polarization spectrum is inverse Fourier transformed to obtain the Faraday dispersion function (FDF), providing us a tomographic distribution of the magnetoionic media along the line of sight. However, this transform gives a poor reconstruction of the FDF because of the instruments limited wavelength coverage. The current Faraday tomography techniques inability to reliably solve the above inverse problem has noticeably plagued cosmic magnetism studies. We propose a new algorithm inspired by the well-studied area of signal restoration, called the Constraining and Restoring iterative Algorithm for Faraday Tomography (CRAFT). This iterative model-independent algorithm is computationally inexpensive and only requires weak physically-motivated assumptions to produce high fidelity FDF reconstructions. We demonstrate an application for a realistic synthetic model FDF of the Milky Way, where CRAFT shows greater potential over other popular model-independent techniques. The dependence of observational frequency coverage on the various techniques reconstruction performance is also demonstrated for a simpler FDF. CRAFT exhibits improvements even over model-dependent techniques (i.e., QU-fitting) by capturing complex multi-scale features of the FDF amplitude and polarization angle variations within a source. The proposed approach will be of utmost importance for future cosmic magnetism studies, especially with broadband polarization data from the Square Kilometre Array and its precursors. We make the CRAFT code publicly available.
The point spread function reconstruction (PSF-R) capability is a deliverable of the MICADO@ESO-ELT project. The PSF-R team works on the implementation of the instrument software devoted to reconstruct the point spread function (PSF), independently of the science data, using adaptive optics (AO) telemetry data, both for Single Conjugate (SCAO) and Multi-Conjugate Adaptive Optics (MCAO) mode of the MICADO camera and spectrograph. The PSF-R application will provide reconstructed PSFs through an archive querying system to restore the telemetry data synchronous to each science frame that MICADO will generate. Eventually, the PSF-R software will produce the output according to user specifications. The PSF-R service will support the state-of-the-art scientific analysis of the MICADO imaging and spectroscopic data.
The Baikal-GVD is a large scale neutrino telescope being constructed in Lake Baikal. The majority of signal detected by the telescope are noise hits, caused primarily by the luminescence of the Baikal water. Separating noise hits from the hits produced by Cherenkov light emitted from the muon track is a challenging part of the muon event reconstruction. We present an algorithm that utilizes a known directional hit causality criterion to contruct a graph of hits and then use a clique-based technique to select the subset of signal hits.The algorithm was tested on realistic detector Monte-Carlo simulation for a wide range of muon energies and has proved to select a pure sample of PMT hits from Cherenkov photons while retaining above 90% of original signal.
Adaptive optics (AO) allows one to derive the point spread function (PSF) simultaneously to the science image, which is a major advantage in post-processing tasks such as astrometry/photometry or deconvolution. Based on the algorithm of citet{veran97}, PSF reconstruction has been developed for four different AO systems so far: PUEO, ALFA, Lick-AO and Altair. A similar effort is undertaken for NAOS/VLT in a collaboration between the group PHASE (Onera and Observatoire de Paris/LESIA) and ESO. In this paper, we first introduce two new algorithms that prevent the use of the so-called $U_{ij}$ functions to: (1) avoid the storage of a large amount of data (for both new algorithms), (2) shorten the PSF reconstruction computation time (for one of the two) and (3) provide an estimation of the PSF variability (for the other one). We then identify and explain issues in the exploitation of real-time Shack-Hartmann (SH) data for PSF reconstruction, emphasising the large impact of thresholding in the accuracy of the phase residual estimation. Finally, we present the data provided by the NAOS real-time computer (RTC) to reconstruct PSF ({em (1)} the data presently available, {em (2)} two NAOS software modifications that would provide new data to increase the accuracy of the PSF reconstruction and {em (3)} the tests of these modifications) and the PSF reconstruction algorithms we are developing for NAOS on that basis.
Muons created by $ u_mu$ charged current (CC) interactions in the water surrounding the ANTARES neutrino telescope have been almost exclusively used so far in searches for cosmic neutrino sources. Due to their long range, highly energetic muons inducing Cherenkov radiation in the water are reconstructed with dedicated algorithms that allow the determination of the parent neutrino direction with a median angular resolution of about unit{0.4}{degree} for an $E^{-2}$ neutrino spectrum. In this paper, an algorithm optimised for accurate reconstruction of energy and direction of shower events in the ANTARES detector is presented. Hadronic showers of electrically charged particles are produced by the disintegration of the nucleus both in CC and neutral current (NC) interactions of neutrinos in water. In addition, electromagnetic showers result from the CC interactions of electron neutrinos while the decay of a tau lepton produced in $ u_tau$ CC interactions will in most cases lead to either a hadronic or an electromagnetic shower. A shower can be approximated as a point source of photons. With the presented method, the shower position is reconstructed with a precision of about unit{1}{metre}, the neutrino direction is reconstructed with a median angular resolution between unit{2}{degree} and unit{3}{degree} in the energy range of SIrange{1}{1000}{TeV}. In this energy interval, the uncertainty on the reconstructed neutrino energy is about SIrange{5}{10}{%}. The increase in the detector sensitivity due to the use of additional information from shower events in the searches for a cosmic neutrino flux is also presented.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
