Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEvaluation of ideal MHD mode stability of CFETR baseline scenario
85
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The CFETR baseline scenario is based on a H-mode equilibrium with high pedestal and highly peaked edge bootstrap current, along with strong reverse shear in safety factor profile. The stability of ideal MHD modes for the CFETR baseline scenario has been evaluated using NIMROD and AEGIS codes. The toroidal mode numbers (n=1-10) are considered in this analysis for different positions of perfectly conducting wall in order to estimate the ideal wall effect on the stability of ideal MHD modes for physics and engineering designs of CFETR. Although, the modes (n=1-10) are found to be unstable in ideal MHD, the structure of all modes is edge localized. Growth rates of all modes are found to be increasing initially with wall position before they reach ideal wall saturation limit (no wall limit). No global core modes are found to be dominantly unstable in our analysis. The design of $q_{min}>2$ and strong reverse shear in $q$ profile is expected to prevent the excitation of global modes. Therefore, this baseline scenario is considered to be suitable for supporting long time steady state discharge in context of ideal MHD physics, if ELMs could be controlled.
rate research
Read More
This article reports an evaluation on the linear ideal magnetohydrodynamic (MHD) stability of the China Fusion Engineering Test Reactor (CFETR) baseline scenario for various first-wall locations. The initial-value code NIMROD and eigen-value code AEGIS are employed in this analysis. A good agreement is achieved between two codes in the growth rates of $n=1-10$ ideal MHD modes for various locations of the perfect conducting first-wall. The higher-$n$ modes are dominated by ballooning modes and localized in the pedestal region, while the lower-$n$ modes have more prominent external kink components and broader mode profiles. The influences of plasma-vacuum profile and wall shape are also examined using NIMROD. In presence of resistive wall, the low-$n$ ideal MHD instabilities are further studied using AEGIS. For the designed first-wall location, the $n = 1$ resistive wall mode (RWM) is found unstable, which could be fully stabilized by uniform toroidal rotation above 2.9% core Alfven speed.
The China Fusion Engineering Test Reactor (CFETR) and the Huazhong Field Reversed Configuration (HFRC), currently both under intensive physical and engineering designs in China, are the two major projects representative of the low-density steady-state and high-density pulsed pathways to fusion. One of the primary tasks of the physics designs for both CFETR and HFRC is the assessment and analysis of the magnetohydrodynamic (MHD) stability of the proposed design schemes. Comprehensive efforts on the assessment of MHD stability of CFETR and HFRC baseline scenarios have led to preliminary progresses that may further benefit engineering designs.
The stability of the ideal magnetohydrodynamic (MHD) interchange mode at marginal conditions is studied. A sufficiently strong constant magnetic field component transverse to the direction of mode symmetry provides the marginality conditions. A systematic perturbation analysis in the smallness parameter, $|b_2/B_c|^{1/2}$, is carried out, where $B_c$ is the critical transverse magnetic field for the zero-frequency ideal mode, and $b_2$ is the deviation from $B_c$. The calculation is carried out to third order including nonlinear terms. It is shown that the system is nonlinearly unstable in the short wavelength limit, i.e., a large enough perturbation results in instability even if $b_2/B_c>0$ (linearly stable). The normalized amplitude for instability is shown to scale as $|b_2/B_c|^{1/2}$. A nonlinear, compressible, MHD simulation is done to check the analytic result. Good agreement is found, including the critical amplitude scaling.
Different variants of hybrid kinetic-fluid models are considered for describing the interaction of a bulk fluid plasma obeying MHD and an energetic component obeying a kinetic theory. Upon using the Vlasov kinetic theory for energetic particles, two planar Vlasov-MHD models are compared in terms of their stability properties. This is made possible by the Hamiltonian structures underlying the considered hybrid systems, whose infinite number of invariants makes the energy-Casimir method effective for determining stability. Equilibrium equations for the models are obtained from a variational principle and in particular a generalized hybrid Grad-Shafranov equation follows for one of the considered models. The stability conditions are then derived and discussed with particular emphasis on kinetic particle effects on classical MHD stability.
In ideal MHD, the magnetic flux is advected by the plasma motion, freezing flux-surfaces into the flow. An MHD equilibrium is reached when the flow relaxes and force balance is achieved. We ask what classes of MHD equilibria can be accessed from a given initial state via smooth incompressible ideal motion. It is found that certain boundary displacements are formally not supported. This follows from yet another investigation of the Hahm--Kulsrud--Taylor (HKT) problem, which highlights the resonant behaviour near a rational layer formed by a set of degenerate critical points in the flux-function. When trying to retain the mirror symmetry of the flux-function with respect to the resonant layer, the vector field that generates the volume-preserving diffeomorphism vanishes at the identity to all order in the time-like path parameter.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
