Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPhoto-induced second-order nonlinearity in stoichiometric silicon nitride waveguides
66
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report the observation of second-harmonic generation in stoichiometric silicon nitride waveguides grown via low-pressure chemical vapour deposition. Quasi-rectangular waveguides with a large cross section were used, with a height of 1 {mu}m and various different widths, from 0.6 to 1.2 {mu}m, and with various lengths from 22 to 74 mm. Using a mode-locked laser delivering 6-ps pulses at 1064 nm wavelength with a repetition rate of 20 MHz, 15% of the incoming power was coupled through the waveguide, making maximum average powers of up to 15 mW available in the waveguide. Second-harmonic output was observed with a delay of minutes to several hours after the initial turn-on of pump radiation, showing a fast growth rate between 10$^{-4}$ to 10$^{-2}$ s$^{-1}$, with the shortest delay and highest growth rate at the highest input power. After this first, initial build-up, the second-harmonic became generated instantly with each new turn-on of the pump laser power. Phase matching was found to be present independent of the used waveguide width, although the latter changes the fundamental and second-harmonic phase velocities. We address the presence of a second-order nonlinearity and phase matching, involving an initial, power-dependent build-up, to the coherent photogalvanic effect. The effect, via the third-order nonlinearity and multiphoton absorption leads to a spatially patterned charge separation, which generates a spatially periodic, semi-permanent, DC-field-induced second-order susceptibility with a period that is appropriate for quasi-phase matching. The maximum measured second-harmonic conversion efficiency amounts to 0.4% in a waveguide with 0.9 x 1 {mu}m$^2$ cross section and 36 mm length, corresponding to 53 {mu}W at 532 nm with 13 mW of IR input coupled into the waveguide. The according $chi^{(2)}$ amounts to 3.7 pm/V, as retrieved from the measured conversion efficiency.
rate research
Read More
Silicon photonics lacks a second-order nonlinear optical response in general because the typical constituent materials are centro-symmetric and lack inversion symmetry, which prohibits second-order nonlinear processes such as second harmonic generation (SHG). Here, for the first time, we realize efficient SHG in a silicon-based optical microresonator by combining a strong photo-induced effective second-order nonlinearity with resonant enhancement and perfect-phase matching. We show a record-high conversion efficiency of 2,500 %/W, which is 2 to 4 orders of magnitude larger than previous works. In particular, our devices realize mW-level SHG output powers with > 20 % power conversion efficiency. This demonstration is a major breakthrough in realizing efficient second-order nonlinear processes in silicon photonics, and paves the way for integrated self-referencing of Kerr frequency combs for compact optical frequency synthesis and optical clock technologies.
Nonlinear processes are at the core of many optical technologies including lasers, information processing, sensing, and security, and require optimised materials suitable for nanoscale integration. Here we demonstrate the emergence of a strong bulk second-order nonlinear response in a composite plasmonic nanorod material comprised of centrosymmetric materials. The metamaterial provides equally strong generation of the p-polarized second harmonic light in response to both s- and p-polarized excitation. We develop an effective-medium description of the underlying physics, compare its predictions to the experimental results and analyze the limits of its applicability. We show that while the effective medium theory adequately describes the nonlinear polarization, the process of emission of second harmonic light cannot be described in the same framework. The work provides an understanding of the emergent nonlinear optical response in composites and opens a doorway to new nonlinear optical platform designs for integrated nonlinear photonics.
A method to probe the guiding characteristics of waveguides formed in real-time is proposed and evaluated. It is based on the analysis of the time dependent light distribution observed at the exit face of the waveguide while progressively altering its index profile and probed by a large diameter optical beam. A beam propagation method is used to model the observed dynamics. The technique is applied to retrieve the properties of soliton-induced waveguides.
We demonstrate a silicon nitride trench waveguide deposited with bowtie antennas for plasmonic enhanced optical trapping. The sub-micron silicon nitride trench waveguides were fabricated with conventional optical lithography in a low cost manner. The waveguides embrace not only low propagation loss and high nonlinearity, but also the inborn merits of combining micro-fluidic channel and waveguide together. Analyte contained in the trapezoidal trench channel can interact with the evanescent field from the waveguide beneath. The evanescent field can be further enhanced by plasmonic nanostructures. With the help of gold nano bowtie antennas, the studied waveguide shows outstanding trapping capability on 10 nm polystyrene nanoparticles. We show that the bowtie antennas can lead to 60-fold enhancement of electric field in the antenna gap. The optical trapping force on a nanoparticle is boosted by three orders of magnitude. A strong tendency shows the nanoparticle is likely to move to the high field strength region, exhibiting the trapping capability of the antenna. Gradient force in vertical direction is calculation by using a point-like dipole assumption, and the analytical solution matches the full-wave simulation well. The investigation indicates that nanostructure patterned silicon nitride trench waveguide is suitable for optical trapping and nanoparticle sensing applications.
We theoretically investigate the use of Rayleigh surface acoustic waves (SAWs) for refractive index modulation in optical waveguides consisting of amorphous dielectrics. Considering low-loss Si$_3$N$_4$ waveguides with a standard core cross section of 4.4$times$0.03 $mu$m$^2$ size, buried 8 $mu$m deep in a SiO$_2$ cladding we compare surface acoustic wave generation in various different geometries via a piezo-active, lead zirconate titanate film placed on top of the surface and driven via an interdigitized transducer (IDT). Using numerical solutions of the acoustic and optical wave equations, we determine the strain distribution of the SAW under resonant excitation. From the overlap of the acoustic strain field with the optical mode field we calculate and maximize the attainable amplitude of index modulation in the waveguide. For the example of a near-infrared wavelength of 840 nm, a maximum shift in relative effective refractive index of 0.7x10$^{-3}$ was obtained for TE polarized light, using an IDT period of 30 - 35 $mu$m, a film thickness of 2.5 - 3.5 $mu$m, and an IDT voltage of 10 V. For these parameters, the resonant frequency is in the range 70 - 85 MHz. The maximum shift increases to 1.2x10$^{-3}$, with a corresponding resonant frequency of 87 MHz, when the height of the cladding above the core is reduced to 3 $mu$m. The relative index change is about 300-times higher than in previous work based on non-resonant proximity piezo-actuation, and the modulation frequency is about 200-times higher. Exploiting the maximum relative index change of 1.2$times$10$^{-3}$ in a low-loss balanced Mach-Zehnder modulator should allow full-contrast modulation in devices as short as 120 $mu$m (half-wave voltage length product = 0.24 Vcm).
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
