Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTHz-Frequency Spin-Hall Auto-Oscillator Based on a Canted Antiferromagnet
80
0
0.0
(
0
)
Added by
Oleksandr Prokopenko
Publication date
2017
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We propose a design of a THz-frequency signal generator based on a layered structure consisting of a current-driven platinum (Pt) layer and a layer of an antiferromagnet (AFM) with easy-plane anisotropy, where the magnetization vectors of the AFM sublattices are canted inside the easy plane by the Dzyaloshinskii-Moriya interaction (DMI). The DC electric current flowing in the Pt layer creates, due to the spin-Hall effect, a perpendicular spin current that, being injected in the AFM layer, tilts the DMI-canted AFM sublattices out of the easy plane, thus exposing them to the action of a strong internal exchange magnetic field of the AFM. The sublattice magnetizations, along with the small net magnetization vector $textbf{m}_{rm DMI}$ of the canted AFM, start to rotate about the hard anisotropy axis of the AFM with the THz frequency proportional to the injected spin current and the AFM exchange field. The rotation of the small net magnetization $textbf{m}_{rm DMI}$ results in the THz-frequency dipolar radiation that can be directly received by an adjacent (e.g. dielectric) resonator. We demonstrate theoretically that the radiation frequencies in the range $f=0.05-2$~THz are possible at the experimentally reachable magnitudes of the driving current density, and evaluate the power of the signal radiated into different types of resonators, showing that this power increases with the increase of frequency $f$, and that it could exceed 1~$mu$W at $f sim 0.5$~THz for a typical dielectric resonator of the electric permittivity $varepsilon sim 10$ and quality factor $Q sim 750$.
rate research
Read More
Spin Hall nano-oscillators (SHNOs) are emerging spintronic devices for microwave signal generation and oscillator based neuromorphic computing combining nano-scale footprint, fast and ultra-wide microwave frequency tunability, CMOS compatibility, and strong non-linear properties providing robust large-scale mutual synchronization in chains and two-dimensional arrays. While SHNOs can be tuned via magnetic fields and the drive current, neither approach is conducive for individual SHNO control in large arrays. Here, we demonstrate electrically gated W/CoFeB/MgO nano-constrictions in which the voltage-dependent perpendicular magnetic anisotropy, tunes the frequency and, thanks to nano-constriction geometry, drastically modifies the spin-wave localization in the constriction region resulting in a giant 42 % variation of the effective damping over four volts. As a consequence, the SHNO threshold current can be strongly tuned. Our demonstration adds key functionality to nano-constriction SHNOs and paves the way for energy-efficient control of individual oscillators in SHNO chains and arrays for neuromorphic computing.
Spin Hall oscillators (SHO) are promising candidates for the generation, detection and amplification of high frequency signals, that are tunable through a wide range of operating frequencies. They offer to be read out electrically, magnetically and optically in combination with a simple bilayer design. Here, we experimentally study the spatial dependence and spectral properties of auto-oscillations in SHO devices based on Pt(7 nm)/ Ni$_{mathrm{80}}$Fe$_{mathrm{20}}$(5 nm) tapered nanowires. Using Brillouin light scattering microscopy, we observe two individual self-localized spin-wave bullets that oscillate at two distinct frequencies (5.2 GHz and 5.45 GHz) and are localized at different positions separated by about 750 nm within the SHO. This state of a tapered SHO has been predicted by a Ginzburg-Landau auto-oscillator model, but not yet been directly confirmed experimentally. We demonstrate that the observed bullets can be individually synchronized to external microwave signals, leading to a frequency entrainment, linewidth reduction and increase in oscillation amplitude for the bullet that is selected by the microwave frequency. At the same time, the amplitude of other parasitic modes decreases, which promotes the single-mode operation of the SHO. Finally, the synchronization of the spin-wave bullets is studied as a function of the microwave power. We believe that our findings promote the realization of extended spin Hall oscillators accomodating several distinct spin-wave bullets, that jointly cover an extended range of tunability.
Modulation of a spin-torque oscillator (STO) signal based on a magnetic tunnel junction (MTJ) with perpendicularly magnetized free layer is investigated. Magnetic field inductive loop was created during MTJ fabrication process, which enables microwave field application during STO operation. The frequency modulation by the microwave magnetic field of up to 3 GHz is explored, showing a potential for application in high-data-rate communication technologies. Moreover, an inductive loop is used for self-synchronization of the STO signal, which after field-locking exhibits significant improvement of the linewidth and oscillation power.
It is demonstrated experimentally that a spin-torque nano-oscillator (STNO) rapidly sweep-tuned by a bias voltage can be used for time-resolved spectrum analysis of frequency-manipulated microwave signals with complicated multi-tone spectra. The critical reduction in the time of spectrum analysis comes from the naturally small time constants of a nano-sized STNO (1-100 ns). The demonstration is performed on a vortex-state STNO generating in a frequency range around 300 MHz, with frequency down-conversion and matched filtering used for signal processing. It is shown that this STNO-based spectrum analyzer can perform analysis of multi-tone signals, and signals with rapidly changing frequency components with time resolution on a $mu$s time scale and frequency resolution limited only by the bandwidth theorem. The proposed concept of rapid time-resolved spectrum analysis can be implemented with any type of micro and nano-scale frequency-swept oscillators having low time constants and high oscillation frequency.
Hybrid systems consisting of a quantum emitter coupled to a mechanical oscillator are receiving increasing attention for fundamental science and potential applications in quantum technologies. In contrast to most of the presented works, in which the oscillator eigenfrequencies are irreversibly determined by the fabrication process, we present here a simple approach to obtain frequency-tunable mechanical resonators based on suspended nanomembranes. The method relies on a micromachined piezoelectric actuator, which we use both to drive resonant oscillations of a suspended Ga(Al)As membrane with embedded quantum dots and to fine tune their mechanical eigenfrequencies. Specifically, we excite oscillations with frequencies of at least 60 MHz by applying an AC voltage to the actuator and tune the eigenfrequencies by at least 25 times their linewidth by continuously varying the elastic stress state in the membranes through a DC voltage. The light emitted by optically excited quantum dots is used as sensitive local strain gauge to monitor the oscillation frequency and amplitude. We expect that our method has the potential to be applicable to other optomechanical systems based on dielectric and semiconductor membranes possibly operating in the quantum regime.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
