Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLateral transport properties of thermally excited magnons in yttrium iron garnet films
111
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Spin information carried by magnons is attractive for computing technology and the development of magnon-based computing circuits is of great interest. However, magnon transport in insulators has been challenging, different from the clear physical picture for spin transport in conductors. Here we investigate the lateral transport properties of thermally excited magnons in yttrium iron garnet (YIG), a model magnetic insulator. Polarity reversals of detected spins in non-local geometry devices have been experimentally observed and are strongly dependent on temperature, YIG film thickness, and injector-detector separation distance. A competing two-channel transport model for thermally excited magnons is proposed, which is qualitatively consistent with the spin signal behavior. In addition to the fundamental significance for thermal magnon transport, our work furthers the development of magnonics by creating an easily accessible magnon source with controllable transport
rate research
Read More
Spin currents are generated within the bulk of magnetic materials due to heat flow, an effect called intrinsic spin-Seebeck. This bulk bosonic spin current consists of a diffusing thermal magnon cloud, parametrized by the magnon chemical potential ($mu_{m}$), with a diffusion length of several microns in yttrium iron garnet (YIG). Transient opto-thermal measurements of the spin-Seebeck effect (SSE) as a function of temperature reveal the time evolution of $mu_{m}$ due to intrinsic SSE in YIG. The interface SSE develops at times < 2 ns while the intrinsic SSE signal continues to evolve at times > 500 $mu$s, dominating the temperature dependence of SSE in bulk YIG. Time-dependent SSE data are fit to a multi-temperature model of coupled spin/heat transport using finite element method (FEM), where the magnon spin lifetime ($tau$) and magnon-phonon thermalization time ($tau_{mp}$) are used as fit parameters. From 300 K to 4 K, $tau_{mp}$ varies from 1 to 10 ns, whereas $tau$ varies from 2 to 60 $mu$s with the spin lifetime peaking at 90 K. At low temperature, a reduction in $tau$ is observed consistent with impurity relaxation reported in ferromagnetic resonance measurements. These results demonstrate that the thermal magnon cloud in YIG contains extremely low frequency magnons (~10 GHz) providing spectral insight to the microscopic scattering processes involved in magnon spin/heat diffusion.
A wide variety of new phenomena such as novel magnetization configurations have been predicted to occur in three dimensional magnetic nanostructures. However, the fabrication of such structures is often challenging due to the specific shapes required, such as magnetic tubes and spirals. Furthermore, the materials currently used to assemble these structures are predominantly magnetic metals that do not allow to study the magnetic response of the system separately from the electronic one. In the field of spintronics, the prototypical material used for such experiments is the ferrimagnetic insulator yttrium iron garnet (Y$_3$Fe$_5$O$_{12}$, YIG). YIG is one of the best materials especially for magnonic studies due to its low Gilbert damping. Here, we report the first successful fabrication of YIG thin films via atomic layer deposition. To that end we utilize a supercycle approach based on the combination of sub-nanometer thin layers of the binary systems Fe$_2$O$_3$ and Y$_2$O$_3$ in the correct atomic ratio on Y$_3$Al$_5$O$_{12}$ substrates with a subsequent annealing step. Our process is robust against typical growth-related deviations, ensuring a good reproducibility. The ALD-YIG thin films exhibit a good crystalline quality as well as magnetic properties comparable to other deposition techniques. One of the outstanding characteristics of atomic layer deposition is its ability to conformally coat arbitrarily-shaped substrates. ALD hence is the ideal deposition technique to grant an extensive freedom in choosing the shape of the magnetic system. The atomic layer deposition of YIG enables the fabrication of novel three dimensional magnetic nanostructures, which in turn can be utilized for experimentally investigating the phenomena predicted in those structures.
Spin waves can probe the Dzyaloshinskii-Moriya interaction (DMI) which gives rise to topological spin textures, such as skyrmions. However, the DMI has not yet been reported in yttrium iron garnet (YIG) with arguably the lowest damping for spin waves. In this work, we experimentally evidence the interfacial DMI in a 7~nm-thick YIG film by measuring the nonreciprocal spin wave propagation in terms of frequency, amplitude and most importantly group velocities using all electrical spin-wave spectroscopy. The velocities of propagating spin waves show chirality among three vectors, i.e. the film normal direction, applied field and spin-wave wavevector. By measuring the asymmetric group velocities, we extract a DMI constant of 16~$mu$J/m$^{2}$ which we independently confirm by Brillouin light scattering. Thickness-dependent measurements reveal that the DMI originates from the oxide interface between the YIG and garnet substrate. The interfacial DMI discovered in the ultrathin YIG films is of key importance for functional chiral magnonics as ultra-low spin-wave damping can be achieved.
We report a study on the electrical properties of 19 nm thick Yttrium Iron Garnet (YIG) films grown by liquid phase epitaxy. The electrical conductivity and Hall coefficient are measured in the high temperature range [300,400]~K using a Van der Pauw four-point probe technique. We find that the electrical resistivity decreases exponentially with increasing temperature following an activated behavior corresponding to a band-gap of $E_gapprox 2$ eV, indicating that epitaxial YIG ultra-thin films behave as large gap semiconductor, and not as electrical insulator. The resistivity drops to about $5times 10^3$~$Omega cdot text{cm}$ at $T=400$ K. We also infer the Hall mobility, which is found to be positive ($p$-type) at 5 cm$^2$/(V$cdot$sec) and about independent of temperature. We discuss the consequence for non-local transport experiments performed on YIG at room temperature. These electrical properties are responsible for an offset voltage (independent of the in-plane field direction) whose amplitude, odd in current, grows exponentially with current due to Joule heating. These electrical properties also induce a sensitivity to the perpendicular component of the magnetic field through the Hall effect. In our lateral device, a thermoelectric offset voltage is produced by a temperature gradient along the wire direction proportional to the perpendicular component of the magnetic field (Righi-Leduc effects).
A dense system of independent oscillators, connected only by their interaction with the same cavity excitation mode, will radiate coherently, which effect is termed superradiance. In several cases, especially if the density of oscillators is high, the superradiance may dominate the intrinsic relaxation processes. This limit can be achieved, e.g., with cyclotron resonance in two-dimensional electron gases. In those experiments, the cyclotron resonance is coupled to the electric field of light, while the oscillator density can be easily controlled by varying the gate voltage. However, in the case of magnetic oscillators, to achieve the dominance of superradiance is more tricky, as material parameters limit the oscillator density, and the magnetic coupling to the light wave is rather small. Here we present quasi-optical magnetic resonance experiments on thin films of yttrium iron garnet. Due to the simplicity of experimental geometry, the intrinsic damping and the superradiance can be easily separated in the transmission spectra. We show that with increasing film thickness, the losses due to coherent radiation prevail the systems internal broadening.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
