Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMobile Beamforming & Spatially Controlled Relay Communications
66
0
0.0
(
0
)
Added by
Dionysios Kalogerias
Publication date
2016
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We consider stochastic motion planning in single-source single-destination robotic relay networks, under a cooperative beamforming framework. Assuming that the communication medium constitutes a spatiotemporal stochastic field, we propose a 2-stage stochastic programming formulation of the problem of specifying the positions of the relays, such that the expected reciprocal of their total beamforming power is maximized. Stochastic decision making is made on the basis of random causal CSI. Recognizing the intractability of the original problem, we propose a lower bound relaxation, resulting to a nontrivial optimization problem with respect to the relay locations, which is equivalent to a small set of simple, tractable subproblems. Our formulation results in spatial controllers with a predictive character; at each time slot, the new relay positions should be such that the expected power reciprocal at the next time slot is maximized. Quite interestingly, the optimal control policy to the relaxed problem is purely selective; under a certain sense, only the best relay should move.
rate research
Read More
The problem of enhancing Quality-of-Service (QoS) in power constrained, mobile relay beamforming networks, by optimally and dynamically controlling the motion of the relaying nodes, is considered, in a dynamic channel environment. We assume a time slotted system, where the relays update their positions before the beginning of each time slot. Modeling the wireless channel as a Gaussian spatiotemporal stochastic field, we propose a novel $2$-stage stochastic programming problem formulation for optimally specifying the positions of the relays at each time slot, such that the expected QoS of the network is maximized, based on causal Channel State Information (CSI) and under a total relay transmit power budget. This results in a schema where, at each time slot, the relays, apart from optimally beamforming to the destination, also optimally, predictively decide their positions at the next time slot, based on causally accumulated experience. Exploiting either the Method of Statistical Differentials, or the multidimensional Gauss-Hermite Quadrature Rule, the stochastic program considered is shown to be approximately equivalent to a set of simple subproblems, which are solved in a distributed fashion, one at each relay. Optimality and performance of the proposed spatially controlled system are also effectively assessed, under a rigorous technical framework; strict optimality is rigorously demonstrated via the development of a version of the Fundamental Lemma of Stochastic Control, and, performance-wise, it is shown that, quite interestingly, the optimal average network QoS exhibits an increasing trend across time slots, despite our myopic problem formulation. Numerical simulations are presented, experimentally corroborating the success of the proposed approach and the validity of our theoretical predictions.
While millimeter wave (mmWave) communications promise high data rates, their sensitivity to blockage and severe signal attenuation presents challenges in their deployment in urban settings. To overcome these effects, we consider a distributed cooperative beamforming system, which relies on static relays deployed in clusters with similar channel characteristics, and where, at every time instance, only one relay from each cluster is selected to participate in beamforming to the destination. To meet the quality-of-service guarantees of the network, a key prerequisite for beamforming is relay selection. However, as the channels change with time, relay selection becomes a resource demanding task. Indeed, estimation of channel state information for all candidate relays, essential for relay selection, is a process that takes up bandwidth, wastes power and introduces latency and interference in the network. We instead propose a unique, predictive scheme for resource efficient relay selection, which exploits the special propagation patterns of the mmWave medium, and can be executed distributively across clusters, and in parallel to optimal beamforming-based communication. The proposed predictive scheme efficiently exploits spatiotemporal channel correlations with current and past networkwide Received Signal Strength (RSS), the latter being invariant to relay cluster size, measured sequentially during the operation of the system. Our numerical results confirm that our proposed relay selection strategy outperforms any randomized selection policy that does not exploit channel correlations, whereas, at the same time, it performs very close to an ideal scheme that uses complete, cluster size dependent RSS, and offers significant savings in terms of channel estimation overhead, providing substantially better network utilization, especially in dense topologies, typical in mmWave networks.
Millimetre wave (mmWave) beam tracking is a challenging task because tracking algorithms are required to provide consistent high accuracy with low probability of loss of track and minimal overhead. To meet these requirements, we propose in this paper a new analog beam tracking framework namely Adaptive Tracking with Stochastic Control (ATSC). Under this framework, beam direction updates are made using a novel mechanism based on measurements taken from only two beam directions perturbed from the current data beam. To achieve high tracking accuracy and reliability, we provide a systematic approach to jointly optimise the algorithm parameters. The complete framework includes a method for adapting the tracking rate together with a criterion for realignment (perceived loss of track). ATSC adapts the amount of tracking overhead that matches well to the mobility level, without incurring frequent loss of track, as verified by an extensive set of experiments under both representative statistical channel models as well as realistic urban scenarios simulated by ray-tracing software. In particular, numerical results show that ATSC can track dominant channel directions with high accuracy for vehicles moving at 72 km/hour in complicated urban scenarios, with an overhead of less than 1%.
The use of millimeter wave (mmWave) spectrum for commercial wireless communications is expected to offer data rates in the order of Gigabits-per-second, thus able to support future applications such as Vehicle-to-Vehicle or Vehicle-to-Infrastructure communication. However, especially in urban settings, mmWave signal propagation is sensitive to blockage by surrounding objects, resulting in significant signal attenuation. One approach to mitigate the effect of attenuation is through multi-hop communication with the help of relays. Leveraging the unique characteristics of the mmWave medium, we consider a single-source/destination $2$-hop system, where a cluster of spatially distributed and reconfigurable relays is used to cooperatively amplify-and-forward the source signal to the destination. Our system evolves in time slots, during which not only are optimal beamforming weights centrally determined, but also future relay positions for the subsequent time slot are optimally selected, jointly maximizing the expected signal-to-interference+noise ratio at the destination. Optimal predictive relay positioning is achieved by formulating a 2-stage stochastic programming problem, which is efficiently approximated via a conditional sample-average-approximation surrogate, and solved in a purely distributed fashion across relays. The efficacy of the proposed near-optimal positioning policy is corroborated by comparison against a randomized relay positioning policy, clearly confirming its superiority.
A Load Balancing Relay Algorithm (LBRA) was proposed to solve the unfair spectrum resource allocation in the traditional mobile MTC relay. In order to obtain reasonable use of spectrum resources, and a balanced MTC devices (MTCDs) distribution, spectrum resources are dynamically allocated by MTCDs regrouped on the MTCD to MTC gateway link. Moreover, the system outage probability and transmission capacity are derived when using LBRA. The numerical results show that the proposed algorithm has better performance in transmission capacity and outage probability than the traditional method. LBRA had an increase in transmission capacity of about 0.7dB, and an improvement in outage probability of about 0.8dB with a high MTCD density.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
