Do you want to publish a course? Click here

Suppression of the ferromagnetic order in the Heusler alloy Ni50Mn35In15 by hydrostatic pressure

93   0   0.0 ( 0 )
 Publication date 2015
  fields Physics
and research's language is English




Ask ChatGPT about the research

We report the effect of hydrostatic pressure on the magnetic and structural properties of the shape-memory Heusler alloy Ni50Mn35In15. Magnetization and x-ray diffraction experiments were performed at hydrostatic pressures up to 5 GPa using diamond anvil cells. Pressure stabilizes the martensitic phase, shifting the martensitic transition to higher temperatures and suppresses the ferromagnetic austenitic phase. Above ~3 GPa, where the martensitic-transition temperature approaches the Curie temperature in the austenite, the magnetization shows no indication of ferromagnetic ordering anymore. We further find an extremely large temperatureregion with a mixture of martensite and austenite phases, which directly relates to the magnetic properties.



rate research

Read More

We report the evolution of magnetic moment as well as magnetic anisotropy with crystalline order in Co$_2$MnSi thin films grown on $(100)$ MgO by pulsed laser deposition. The films become more ordered as the annealing temperature ($T_A$) increases from 400 to 600 $^0$C. The extent of emph{L}$2_1$ ordering in the films annealed at 600 $^0$C is $approx 96%$. The static magnetization measurements by vibrating sample magnetometry shows a maximum moment of 4.95 $mu_B$ per formula unit with low coercivity ($H_C$ $approx$ 65 Oe) in the films annealed at 600 $^0$C. A rigorous analysis of the azimuthal and polar angle dependent ferromagnetic resonance (FMR) measured at several temperatures allows determination of various anisotropy fields relevant to our system as a function of $T_A$. Finally, we have evaluated the exchange stiffness constant down to 100 K using spin wave modes in FMR spectra. We have also estimated the exchange energies as well as stiffness constant by varying the lattice parameter emph{ab-initio} using the Korringa-Kohn-Rostoker method.
We present a detailed investigation of the electronic properties of CeFeAsO under chemical (As by P substitution) and hydrostatic pressure by means of in-house and synchrotron Mossbauer spectroscopy. The Fe magnetism is suppressed due to both pressures and no magnetic order was observed above a P-substitution level of 40% or 5.2 GPa hydrostatic pressure. We compared both pressures and found that the isovalent As by P substitution change the crystallographic and electronic properties differently than hydrostatic pressure.
Ni-Mn-In magnetic shape-memory Heusler alloys exhibit generally a large thermal hysteresis at their first-order martensitic phase transition which hinder a technological application in magnetic refrigeration. By optimizing the Cu content in Ni$_2$Cu$_x$Mn$_{1.4-x}$In$_{0.6}$, we obtained a thermal hysteresis of the martensitic phase transition in Ni$_{2}$Cu$_{0.2}$Mn$_{1.2}$In$_{0.6}$ of only 6 K. We can explain this very small hysteresis by an almost perfect habit plane at the interface of martensite and austenite phases. Application of hydrostatic pressure does not reduce the hysteresis further, but shifts the martensitic transition close to room temperature. The isothermal entropy change does not depend on warming or cooling protocols and is pressure independent. Experiments in pulsed-magnetic fields on Ni$_{2}$Cu$_{0.2}$Mn$_{1.2}$In$_{0.6}$ find a reversible magnetocaloric effect with a maximum adiabatic temperature change of -13 K.
Half Metal Magnets are of great interest in the field of spintronics because of their potential full spin-polarization at the Fermi level and low magnetization damping. The high Curie temperature and predicted 0.7eV minority spin gap make the Heusler alloy Co2MnSi very promising for applications.We investigated the half-metallic magnetic character of this alloy using spin-resolved photoemission, ab initio calculation and ferromagnetic resonance. At the surface of Co2MnSi, a gap in the minority spin channel is observed, leading to 100% spin polarization. However, this gap is 0.3 eV below the Fermi level and a minority spin state is observed at the Fermi level. We show that a minority spin gap at the Fermi energy can nevertheless be recovered either by changing the stoichiometry of the alloy or by covering the surface by Mn, MnSi or MgO. This results in extremely small damping coefficients reaching values as low as 7x 10-4.
Half-metallic Heusler alloys are attracting considerable attention because of their unique half-metallic band structures which exhibit high spin polarization and yield huge magnetoresistance ratios. Besides serving as ferromagnetic electrodes, Heusler alloys also have the potential to host spin-charge conversion which has been recently demonstrated in other ferromagnetic metals. Here, we report on the spin-charge conversion effect in the prototypical Heusler alloy NiMnSb. Spin currents were injected from Y3Fe5O12 into NiMnSb films by spin pumping, and then the spin currents were converted to charge currents via spin-orbit interactions. Interestingly, an unusual charge signal was observed with a sign change at low temperature, which can be manipulated by film thickness and ordering structure. It is found that the spin-charge conversion has two contributions. First, the interfacial contribution causes a negative voltage signal, which is almost constant versus temperature. The second contribution is temperature dependent because it is dominated by minority states due to thermally excited magnons in the bulk part of the film. This work provides a pathway for the manipulation of spin-charge conversion in ferromagnetic metals by interface-bulk engineering for spintronic devices.
comments
Fetching comments Fetching comments
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا