Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userBlack phosphorus mode-locked Er-doped ZBLAN fiber laser at 2.8 um wavelength
316
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave passively mode-locked Er:ZBLAN fiber laser is demonstrated at the wavelength of 2.8 um, which delivers a maximum average output power of 613 mW, a repetition rate of 24 MHz and a pulse duration of 42 ps. To the best of our knowledge, it is the first time to demonstrate black phosphorus mode-locked laser at 2.8 um wavelength. Our results demonstrate the feasibility of black phosphorus flake as a new two-dimensional material for application in mid-infrared ultrafast photonics.
rate research
Read More
With the proposal of dual-wavelength pumping (DWP) scheme, DWP Er:ZBLAN fiber lasers at 3.5 um have become a fascinating area of research. However, limited by the absence of suitable saturable absorber, passively Q-switched and mode-locked fiber lasers have not been realized in this spectral region. Based on the layer-dependent bandgap and excellent photoelectric characteristics of black phosphorus (BP), BP is a promising candidate for saturable absorber near 3.5 um. Here, we fabricated a 3.5-um saturable absorber mirror (SAM) by transferring liquid-phase exfoliated BP flakes onto a gold-coated mirror. With the as-prepared BP SAM, we realized stable Q-switching and continuous-wave mode-locking operations in the DWP Er:ZBLAN fiber lasers at 3.5 um. To the best of our knowledge, it is the first time to achieve passively Q-switched and mode-locked pulses in 3.5 um spectral region. The research results will not only promote the development of 3.5-um pulsed fiber lasers but also open the photonic application of two-dimensional materials in this spectral region
Black phosphorus, a newly emerged two-dimensional material, has attracted wide attention as novel photonic material. Here, multi-layer black phosphorus is successfully fabricated by liquid phase exfoliation method. By employing black phosphorus as saturable absorber, we demonstrate a passively Q-switched Er-doped ZBLAN fiber laser at the wavelength of 2.8 {mu}m. The modulation depth and saturation fluence of the black phosphorus saturable absorber are measured to be 15% and 9 {mu}J/cm2, respectively. The Q-switched fiber laser delivers a maximum average power of 485 mW with corresponding pulse energy of 7.7 {mu}J and pulse width of 1.18 {mu}s at repetition rate of 63 kHz. To the best of our knowledge, this is the first time to demonstrate that black phosphorus can realize Q-switching of 2.8-{mu}m fiber laser. Our research results show that black phosphorus is a promising saturable absorber for mid-infrared pulsed lasers.
Continuous-wave mode-locked femtosecond 2 um solid-state laser with a c-cut Tm:CaYAlO4 as gain medium was experimentally demonstrated. The mode locked laser generated stable pulses with average output power as high as 531 mW, pulse duration of 496 fs, and repetition rate of 97 MHz at 1975 nm. The research results show that Tm:CaYAlO4 is an excellent gain medium for femtosecond pulse generation at 2um wavelength.
Atomic layer graphene possesses wavelength-insensitive ultrafast saturable absorption, which can be exploited as a full-band mode locker. Taking advantage of the wide band saturable absorption of the graphene, we demonstrate experimentally that wide range (1570 nm - 1600nm) continuous wavelength tunable dissipative solitons could be formed in an erbium doped fiber laser mode locked with few layer graphene.
Cross phase modulation (XPM) could induce soliton trapping in nonlinear medium, which has been employed to achieve vector soliton, optical switching and optical analog of gravity-like potentials. These results are generally within the definition in Hamilton system. Here, we report on the observation of a XPM-forced frequency-oscillating soliton (XFOS) whose wavelength exhibits redshift and blueshift periodically like dancing in a mode-locked fiber laser under moderate birefringence. XFOS consists of two orthogonally polarized components exhibiting simultaneous frequency oscillation driven by XPM and gain effect, which allows withstanding higher pulse energy. The pulse trapping is maintained by differentiating the frequency-shift rate. Numerical simulations agree very well with experimental results, revealing an idiosyncratic evolution dynamic for asymmetry pulses in nonlinear dissipative system and envisaging a technique to control pulse feature with preset pulse chirp. XFOS may exist generally in polarization-independent ultrafast lasers, which enriches soliton family and brings useful insights into nonlinear science and applications.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
