Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPerformance Analysis and Optimal Filter Design for Sigma-Delta Modulation via Duality with DPCM
113
0
0.0
(
0
)
Added by
Or Ordentlich
Publication date
2015
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Sampling above the Nyquist rate is at the heart of sigma-delta modulation, where the increase in sampling rate is translated to a reduction in the overall (mean-squared-error) reconstruction distortion. This is attained by using a feedback filter at the encoder, in conjunction with a low-pass filter at the decoder. The goal of this work is to characterize the optimal trade-off between the per-sample quantization rate and the resulting mean-squared-error distortion, under various restrictions on the feedback filter. To this end, we establish a duality relation between the performance of sigma-delta modulation, and that of differential pulse-code modulation when applied to (discrete-time) band-limited inputs. As the optimal trade-off for the latter scheme is fully understood, the full characterization for sigma-delta modulation, as well as the optimal feedback filters, immediately follow.
rate research
Read More
In this paper, we investigate the impacts of transmitter and receiver windows on orthogonal time-frequency space (OTFS) modulation and propose a window design to improve the OTFS channel estimation performance. Assuming ideal pulse shaping filters at the transceiver, we first identify the role of window in effective channel and the reduced channel sparsity with conventional rectangular window. Then, we characterize the impacts of windowing on the effective channel estimation performance for OTFS modulation. Based on the revealed insights, we propose to apply a Dolph-Chebyshev (DC) window at either the transmitter or the receiver to effectively enhance the sparsity of the effective channel. As such, the channel spread due to the fractional Doppler is significantly reduced, which leads to a lower error floor in channel estimation compared with that of the rectangular window. Simulation results verify the accuracy of the obtained analytical results and confirm the superiority of the proposed window designs in improving the channel estimation performance over the conventional rectangular or Sine windows.
This paper investigates the design and performance of delayed bit-interleaved coded modulation (DBICM) with low-density parity-check (LDPC) codes. For Gray labeled square $M$-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. When analyzing the capacity of DBICM, we find two important properties: the capacity improvement due to delayed coded bits being mapped to the real and imaginary parts of the transmitted symbols are independent of each other; a pair of delay schemes with delayed coded bits having identical bit-channel capacity lead to equivalent DBICM capacity. Using these two properties, we efficiently optimize the delay scheme for any uniform Gray-QAM systems. Furthermore, these two properties enable efficient LDPC code designs regarding unequal error protection via bit-channel type classifications. Moreover, we use protograph-based extrinsic information transfer charts to jointly optimize degree distributions and channel assignments of LDPC codes and propose a constrained progressive edge growth like algorithm to jointly construct LDPC codes and bit-interleavers for DBICM, taking distinctive bit-channels capacity into account. Simulation results demonstrate that the designed LDPC coded DBICM systems significantly outperform LDPC coded BICM systems.
Recent considerations for reconfigurable intelligent surfaces (RISs) assume that RISs can convey information by reflection without the need of transmit radio frequency chains, which, however, is a challenging task. In this paper, we propose an RIS-enhanced multiple-input single-output system with reflection pattern modulation, where the RIS can configure its reflection state for boosting the received signal power via passive beamforming and simultaneously conveying its own information via reflection. We formulate an optimization problem to maximize the average received signal power by jointly optimizing the active beamforming at the access point (AP) and passive beamforming at the RIS for the case where the RISs state information is statistically known by the AP, and propose a high-quality suboptimal solution based on the alternating optimization technique. We analyze the asymptotic outage probability of the proposed scheme under Rayleigh fading channels, for which a closed-form expression is derived. The achievable rate of the proposed scheme is also investigated for the case where the transmitted symbol is drawn from a finite constellation. Simulation results validate the effectiveness of the proposed scheme and reveal the effect of various system parameters on the achievable rate performance. It is shown that the proposed scheme outperforms the conventional RIS-assisted system without information transfer in terms of achievable rate performance.
To improve national security, government agencies have long been committed to enforcing powerful surveillance measures on suspicious individuals or communications. In this paper, we consider a wireless legitimate surveillance system, where a full-duplex multi-antenna legitimate monitor aims to eavesdrop on a dubious communication link between a suspicious pair via proactive jamming. Assuming that the legitimate monitor can successfully overhear the suspicious information only when its achievable data rate is no smaller than that of the suspicious receiver, the key objective is to maximize the eavesdropping non-outage probability by joint design of the jamming power, receive and transmit beamformers at the legitimate monitor. Depending on the number of receive/transmit antennas implemented, i.e., single-input single-output, single-input multiple-output, multiple-input single-output and multiple-input multiple-output (MIMO), four different scenarios are investigated. For each scenario, the optimal jamming power is derived in closed-form and efficient algorithms are obtained for the optimal transmit/receive beamforming vectors. Moreover, low-complexity suboptimal beamforming schemes are proposed for the MIMO case. Our analytical findings demonstrate that by exploiting multiple antennas at the legitimate monitor, the eavesdropping non-outage probability can be significantly improved compared to the single antenna case. In addition, the proposed suboptimal transmit zero-forcing scheme yields similar performance as the optimal scheme.
Physical layer security has been considered as an important security approach in wireless communications to protect legitimate transmission from passive eavesdroppers. This paper investigates the physical layer security of a wireless multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) communication system in the presence of a multiple-antenna eavesdropper. We first propose a transmit-filter-assisted secure MIMO-OFDM system which can destroy the orthogonality of eavesdroppers signals. Our proposed transmit filter can disturb the reception of eavesdropper while maintaining the quality of legitimate transmission. Then, we propose another artificial noise (AN)-assisted secure MIMO-OFDM system to further improve the security of the legitimate transmission. The time-domain AN signal is designed to disturb the reception of eavesdropper while the legitimate transmission will not be affected. Simulation results are presented to demonstrate the security performance of the proposed transmit filter design and AN-assisted scheme in the MIMO-OFDM system.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
