Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userElectron beam induced current in the high injection regime
91
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Electron beam induced current (EBIC) is a powerful technique which measures the charge collection efficiency of photovoltaics with sub-micron spatial resolution. The exciting electron beam results in a high generation rate density of electron-hole pairs, which may drive the system into nonlinear regimes. An analytic model is presented which describes the EBIC response when the {it total} electron-hole pair generation rate exceeds the rate at which carriers are extracted by the photovoltaic cell, and charge accumulation and screening occur. The model provides a simple estimate of the onset of the high injection regime in terms of the material resistivity and thickness, and provides a straightforward way to predict the EBIC lineshape in the high injection regime. The model is verified by comparing its predictions to numerical simulations in 1 and 2 dimensions. Features of the experimental data, such as the magnitude and position of maximum collection efficiency versus electron beam current, are consistent with the 3 dimensional model.
rate research
Read More
Electron beam induced current (EBIC) is a powerful characterization technique which offers the high spatial resolution needed to study polycrystalline solar cells. Ideally, an EBIC measurement reflects the spatially resolved quantum efficiency of the device. In this work, a model for EBIC measurements is presented which applies when recombination within the depletion region is substantial. This model is motivated by cross-sectional EBIC experiments on CdS-CdTe photovoltaic cells which show that the maximum efficiency of carrier collection is less than 100 % and varies throughout the depletion region. The model can reproduce experimental results only if the mobility-lifetime product $mutau$ is spatially varying within the depletion region. The reduced collection efficiency is speculated to be related to high-injection effects, and the resulting increased radiative recombination.
We theoretically analyze the contrast observed at the outcrop of a threading dislocation at the GaN(0001) surface in cathodoluminescence and electron-beam induced current maps. We consider exciton diffusion and recombination including finite recombination velocities both at the planar surface and at the dislocation. Formulating the reciprocity theorem for this general case enables us to provide a rigorous analytical solution of this diffusion-recombination problem. The results of the calculations are applied to an experimental example to determine both the exciton diffusion length and the recombination strength of threading dislocations in a free-standing GaN layer with a dislocation density of $6times10^{5}$~cm$^{-2}$.
Electron beam induced current (EBIC) is a powerful characterization technique which offers the high spatial resolution needed to study polycrystalline solar cells. Current models of EBIC assume that excitations in the $p$-$n$ junction depletion region result in perfect charge collection efficiency. However we find that in CdTe and Si samples prepared by focused ion beam (FIB) milling, there is a reduced and nonuniform EBIC lineshape for excitations in the depletion region. Motivated by this, we present a model of the EBIC response for excitations in the depletion region which includes the effects of surface recombination from both charge-neutral and charged surfaces. For neutral surfaces we present a simple analytical formula which describes the numerical data well, while the charged surface response depends qualitatively on the location of the surface Fermi level relative to the bulk Fermi level. We find the experimental data on FIB-prepared Si solar cells is most consistent with a charged surface, and discuss the implications for EBIC experiments on polycrystalline materials.
The separation of hot carriers in semiconductors is of interest for applications such as thermovoltaic photodetection and third-generation photovoltaics. Semiconductor nanowires offer several potential advantages for effective hot-carrier separation such as: a high degree of control and flexibility in heterostructure-based band engineering, increased hot-carrier temperatures compared to bulk, and a geometry well suited for local control of light absorption. Indeed, InAs nanowires with a short InP energy barrier have been observed to produce electric power under global illumination, with an open-circuit voltage exceeding the Shockley-Queisser limit. To understand this behaviour in more detail, it is necessary to maintain control over the precise location of electron-hole pair-generation in the nanowire. In this work we perform electron-beam induced current measurements with high spatial resolution, and demonstrate the role of the InP barrier in extracting energetic electrons. We interprete the results in terms of hot-carrier separation, and extract estimates of the hot carrier mean free path.
We present Fermis golden rule calculations of the optical carrier injection and the coherent control of current injection in graphene nanoribbons with zigzag geometry, using an envelope function approach. This system possesses strongly localized states (flat bands) with a large joint density of states at low photon energies; for ribbons with widths above a few tens of nanometers, this system also posses large number of (non-flat) states with maxima and minima close to the Fermi level. Consequently, even with small dopings the occupation of these localized states can be significantly altered. In this work, we calculate the relevant quantities for coherent control at different chemical potentials, showing the sensitivity of this system to the occupation of the edge states. We consider coherent control scenarios arising from the interference of one-photon absorption at $2hbaromega$ with two-photon absorption at $hbaromega$, and those arising from the interference of one-photon absorption at $hbaromega$ with stimulated electronic Raman scattering (virtual absorption at $2hbaromega$ followed by emission at $hbaromega$). Although at large photon energies these processes follow an energy-dependence similar to that of 2D graphene, the zigzag nanoribbons exhibit a richer structure at low photon energies, arising from divergences of the joint density of states and from resonant absorption processes, which can be strongly modified by doping. As a figure of merit for the injected carrier currents, we calculate the resulting swarm velocities. Finally, we provide estimates for the limits of validity of our model.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
