Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userVehicle Parameter Independent Gain Matrix Selection for a Quadrotor using State-Space Controller Design Methods
167
0
0.0
(
0
)
Added by
Graeme Wilson N
Publication date
2014
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
With quadrotor use seeing extensive growth in recent years, the autonomous control of these Unmanned Aerial Vehicles (UAVs) is an increasing relevant and intersting field. In this paper a linear state-space approach at designing a stable hover controller in the presence of disturbances is presented along with simulation of control system performance. Additionally the design of a tracking system, for linear inertial position and yaw, is presented with simulation results. The gain matrix developed for this control system is independent of the specific quadrotor parameters, meaning that this same gain matrix can be used on a wide variety of quadrotors without modification. The hover and tracking controllers designed in this paper proved to perform well in simulation under perturbation disturbances and normally distributed disturbances on the UAVs linear speeds and angular speeds.
rate research
Read More
Quadrotor is often used to accomplish various missions related to surveillance, territory mapping, search and rescue, and other purposes. Quadrotor is a nonlinear system with multiple input multiple output and has stability issue due to external disturbance. These characteristics lead to difficulty in cruise control of quadrotor automatically. Decoupling method is used to eliminate the interaction of other control on rotational motion, then the roll, pitch, and yaw angle can be controlled independently. Nonlinear PD controller is obtained from invers model of control signal on a quad rotor and it is used to control the translational motion in x and y axis with nonlinear dynamics because of the influence the rotational angle. Simulation results show that the proposed method can eliminate the control interaction of roll, pitch and yaw angle, hence it works like single input single output system and translational motion on x andy axis can achieve the expected trajectory precisely.
The topic of this paper is to use an intuitive model-based approach to design a networked controller for a recent benchmark scenario. The benchmark problem is to remotely control a two-wheeled inverted pendulum robot via W-LAN communication. The robot has to keep a vertical upright position. Incorporating wireless communication in the control loop introduces multiple uncertainties and affects system performance and stability. The proposed networked control scheme employs model predictive techniques and deliberately extends delays in order to make them constant and deterministic. The performance of the resulting networked control system is evaluated experimentally with a predefined benchmarking experiment and is compared to local control involving no delays.
Advanced and accurate modelling of a Flapping Wing Micro Air Vehicle (FW MAV) and its control is one of the recent research topics related to the field of autonomous Unmanned Aerial Vehicles (UAVs). In this work, a four wing Natureinspired (NI) FW MAV is modeled and controlled inspiring by its advanced features like quick flight, vertical take-off and landing, hovering, and fast turn, and enhanced manoeuvrability when contrasted with comparable-sized fixed and rotary wing UAVs. The Fuzzy C-Means (FCM) clustering algorithm is utilized to demonstrate the NIFW MAV model, which has points of interest over first principle based modelling since it does not depend on the system dynamics, rather based on data and can incorporate various uncertainties like sensor error. The same clustering strategy is used to develop an adaptive fuzzy controller. The controller is then utilized to control the altitude of the NIFW MAV, that can adapt with environmental disturbances by tuning the antecedent and consequent parameters of the fuzzy system.
In this paper, a novel adaptive-gain Second Order Sliding Mode (SOSM) observer is proposed for multicell converters by considering it as a class of hybrid systems. The aim is to reduce the number of voltage sensors by estimating the capacitor voltages only from the measurement of load current. The proposed observer is proven to be robust in the presence of perturbations with emph{unknown} boundary. However, the states of the system are only partially observable in the sense of observability rank condition. Due to its switching behavior, a recent concept of $Z(T_N)$ observability is used to analysis its hybrid observability, since its observability depends upon the switching control signals. Under certain condition of the switching sequences, the voltage across each capacitor becomes observable. Simulation results and comparisons with Luenberger switched observer highlight the effectiveness and robustness of the proposed observer with respect to output measurement noise and system uncertainties (load variations).
This is a draft of summary of multi-model algorithm of extended object tracking based on random matrix (RMF-MM).
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
