Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userReflectarray antennas for terahertz communications
216
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Reflectarrays composed of resonant microstrip gold patches on a dielectric substrate are demonstrated for operation at terahertz frequencies. Based on the relation between the patch size and the reflection phase, a progressive phase distribution is implemented on the patch array to create a reflector able to deflect an incident beam towards a predefined angle off the specular direction. In order to confirm the validity of the design, a set of reflectarrays each with periodically distributed 360*360 patch elements are fabricated and measured. The experimental results obtained through terahertz time-domain spectroscopy (THz-TDS) show that up to nearly 80% of the incident amplitude is deflected into the desired direction at an operation frequency close to 1 THz. The radiation patterns of the reflectarray in TM and TE polarizations are also obtained at different frequencies. This work presents an attractive concept for developing components able to efficiently manipulate terahertz radiation for emerging terahertz communications.
rate research
Read More
Terahertz communications is a promising modality for future short-range point-to point wireless data transmission at rates up to terabit per second. A milestone towards this goal is the development of an integrated transmitter and receiver platforms with high efficiency. One key enabling component is a planar waveguiding structure with wide bandwidth and low dispersion. This work proposes substrate-less all-dielectric waveguides cladded by an effective medium for low-loss and low dispersion terahertz transmission in broadband. This self-supporting structure is built solely into a single silicon wafer with air perforations to mitigate significant absorptions in metals and dielectrics at terahertz frequencies. The realized waveguides can cover the entire 260 to 400 GHz with single dominant modes in both orthogonal polarizations. The simulation shows that for the E_11^x mode the attenuation ranges from 0.003 to 0.024 dB/cm over the entire band, while it varies from 0.008 to 0.023 dB/cm for the E_11^y mode. Limited by the measurement setup, the maximum error-free data rate of 28 Gbit/s is experimentally achieved at 335 GHz on a 3-cm waveguide. We further demonstrate the transmission of uncompressed 4K-resolution video across this waveguide. This waveguide platform promises integration of diverse active and passive components. Thus, we can foresee it as a potential candidate for the future terahertz integrated circuits, in analogy to photonic integrated circuits at optical frequencies.
Molecular recognition and discrimination of carbohydrates are important because carbohydrates perform essential roles in most living organisms for energy metabolism and cell-to-cell communication. Nevertheless, it is difficult to identify or distinguish various carbohydrate molecules owing to the lack of a significant distinction in the physical or chemical characteristics. Although there has been considerable effort to develop a sensing platform for individual carbohydrates selectively using chemical receptors or an ensemble array, their detection and discrimination limits have been as high in the millimolar concentration range. Here we show a highly sensitive and selective detection method for the discrimination of carbohydrate molecules using nano-slot-antenna array-based sensing chips which operate in the terahertz frequency range. This THz metamaterial sensing tool recognizes various types of carbohydrate molecules over a wide range of molecular concentrations. Strongly localized and enhanced terahertz transmission by nano-antennas can effectively increase the molecular absorption cross sections, thereby enabling the detection of these molecules even at low concentrations. We verified the performance of nano-antenna sensing chip by both THz spectra and images of transmittance. Screening and identification of various carbohydrates can be applied to test even real market beverages with a high sensitivity and selectivity.
We report a THz reflectarray metasurface which uses graphene as active element to achieve beam steering, shaping and broadband phase modulation. This is based on the creation of a voltage controlled reconfigurable phase hologram, which can impart different reflection angles and phases to an incident beam, replacing bulky and fragile rotating mirrors used for terahertz imaging. This can also find applications in other regions of the electromagnetic spectrum, paving the way to versatile optical devices including light radars, adaptive optics, electro-optical modulators and screens.
We present a graphene-based metasurface that can be actively tuned between different regimes of operation, such as anomalous beam steering and focusing, cloaking and illusion optics, by applying electrostatic gating without modifying the geometry of the metasurface. The metasurface is designed by placing graphene nano-ribbons (GNRs) on a dielectric cavity resonator, where interplay between geometric plasmon resonances in the ribbons and Fabry-Perot resonances in the cavity is used to achieve 2$pi$ phase shift. As a proof of the concept, we demonstrate that wavefront of the field reflected from a triangular bump covered by the metasurface can be tuned by applying electric bias so as to resemble that of bare plane and of a spherical object. Moreover, reflective focusing and change of the reflection direction for the above-mentioned cases are also shown.
We present design and experimental validation of the system for the generation of the Orbital Angular Momentum (OAM) states using 3D-printed low-loss metamaterial phase plates for application in the terahertz (THz) wireless communications. By azimuthally varying the hole pattern density within the phase plate, the local effective refractive index is varied, thus also changing the local propagation constant in the azimuthal direction. The OAM of any topological charge can be created by simply varying the thickness of the phase plate. The phase plate with topological charge (m=1) is 3D printed and the amplitude and the phase of the terahertz signal after passing the plate is characterized using the THz-time domain imaging system. Finally, we present the experimental setup and theoretical simulation on the multiplexing and de-multiplexing of several different OAM states for applications in wireless terahertz communication.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
