Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAccurate Group Delay Measurement for Radial Velocity Instruments Using the Dispersed Fixed Delay Interferometer Method
114
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The dispersed fixed-delay Intereferometer (DFDI) method is attractive for its low cost, compact size, and multiobject capability in precision radial-velocity (RV) measurements. The phase shift of fringes of stellar absorption lines is measured and then converted to an RV shift via an important parameter, phase-to-velocity scale (PV scale), determined by the group delay (GD) of a fixed-delay interferometer. Two methods of GD measurement using a DFDI Doppler instrument are presented in this article: (1) GD measurement using white-light combs gen- erated by the fixed-delay interferometer and (2) GD calibration using an RV reference star. These two methods provide adequate precision of GD measurement and calibration, given the current RV precision achieved by a DFDI Doppler instrument. They can potentially be used to measure GD of an fixed-delay interferometer for submeter- precision Doppler measurement with a DFDI instrument. Advantages and limitations of each method are discussed in detail. The two methods can serve as standard procedures of PV-scale calibration for DFDI instruments and cross- checks for each other.
rate research
Read More
The dispersed fixed-delay interferometer (DFDI) represents a new instrument concept for high-precision radial velocity (RV) surveys for extrasolar planets. A combination of Michelson interferometer and medium-resolution spectrograph, it has the potential for performing multi-object surveys, where most previous RV techniques have been limited to observing only one target at a time. Because of the large sample of extrasolar planets needed to better understand planetary formation, evolution, and prevalence, this new technique represents a logical next step in instrumentation for RV extrasolar planet searches, and has been proven with the single-object Exoplanet Tracker (ET) at Kitt Peak National Observatory, and the multi-object W. M. Keck/MARVELS Exoplanet Tracker at Apache Point Observatory. The development of the ET instruments has necessitated fleshing out a detailed understanding of the physical principles of the DFDI technique. Here we summarize the fundamental theoretical material needed to understand the technique and provide an overview of the physics underlying the instruments working. We also derive some useful analytical formulae that can be used to estimate the level of various sources of error generic to the technique, such as photon shot noise when using a fiducial reference spectrum, contamination by secondary spectra (e.g., crowded sources, spectroscopic binaries, or moonlight contamination), residual interferometer comb, and reference cross-talk error. Following this, we show that the use of a traditional gas absorption fiducial reference with a DFDI can incur significant systematic errors that must be taken into account at the precision levels required to detect extrasolar planets.
We demonstrate the ability to measure precise stellar barycentric radial velocities with the dispersed fixed-delay interferometer technique using the Exoplanet Tracker (ET), an instrument primarily designed for precision differential Doppler velocity measurements using this technique. Our barycentric radial velocities, derived from observations taken at the KPNO 2.1 meter telescope, differ from those of Nidever et al. by 0.047 km/s (rms) when simultaneous iodine calibration is used, and by 0.120 km/s (rms) without simultaneous iodine calibration. Our results effectively show that a Michelson interferometer coupled to a spectrograph allows precise measurements of barycentric radial velocities even at a modest spectral resolution of R ~ 5100. A multi-object version of the ET instrument capable of observing ~500 stars per night is being used at the Sloan 2.5 m telescope at Apache Point Observatory for the Multi-object APO Radial Velocity Exoplanet Large-area Survey (MARVELS), a wide-field radial velocity survey for extrasolar planets around TYCHO-2 stars in the magnitude range 7.6<V<12. In addition to precise differential velocities, this survey will also yield precise barycentric radial velocities for many thousands of stars using the data analysis techniques reported here. Such a large kinematic survey at high velocity precision will be useful in identifying the signature of accretion events in the Milky Way and understanding local stellar kinematics in addition to discovering exoplanets, brown dwarfs and spectroscopic binaries.
The Exoplanet Tracker is a prototype of a new type of fibre-fed instrument for performing high precision relative Doppler measurements to detect extra-solar planets. A combination of Michelson interferometer and medium resolution spectrograph, this low-cost instrument facilitates radial velocity measurements with high throughput over a small bandwidth (~ 300 Angstroms), and has the potential to be designed for multi-object operation with moderate bandwidths (~1000 Angstroms). We present the first planet detection with this new type of instrument, a successful confirmation of the well established planetary companion to 51 Peg, showing an rms precision of 11.5m/s over five days. We also show comparison measurements of the radial velocity stable star, Eta Cas, showing an rms precision of 7.9m/s over seven days. These new results are starting to approach the precision levels obtained with traditional radial velocity techniques based on cross-dispersed echelles. We anticipate that this new technique could have an important impact in the search for extra-solar planets.
Variable-delay Polarization Modulators (VPMs) are currently being implemented in experiments designed to measure the polarization of the cosmic microwave background on large angular scales because of their capability for providing rapid, front-end polarization modulation and control over systematic errors. Despite the advantages provided by the VPM, it is important to identify and mitigate any time-varying effects that leak into the synchronously modulated component of the signal. In this paper, the effect of emission from a $300$ K VPM on the system performance is considered and addressed. Though instrument design can greatly reduce the influence of modulated VPM emission, some residual modulated signal is expected. VPM emission is treated in the presence of rotational misalignments and temperature variation. Simulations of time-ordered data are used to evaluate the effect of these residual errors on the power spectrum. The analysis and modeling in this paper guides experimentalists on the critical aspects of observations using VPMs as front-end modulators. By implementing the characterizations and controls as described, front-end VPM modulation can be very powerful for mitigating $1/f$ noise in large angular scale polarimetric surveys. None of the systematic errors studied fundamentally limit the detection and characterization of B-modes on large scales for a tensor-to-scalar ratio of $r=0.01$. Indeed, $r<0.01$ is achievable with commensurately improved characterizations and controls.
Spectrographs nominally contain a degree of quasi-static optical aberrations resulting from the quality of manufactured component surfaces, imperfect alignment, design residuals, thermal effects, and other other associated phenomena involved in the design and construction process. Aberrations that change over time can mimic the line centroid motion of a Doppler shift, introducing radial velocity (RV) uncertainty that increases time-series variability. Even when instrument drifts are tracked using a precise wavelength calibration source, barycentric motion of the Earth leads to a wavelength shift of stellar light causing a translation of the spectrum across the focal plane array by many pixels. The wavelength shift allows absorption lines to experience different optical propagation paths and aberrations over observing epochs. We use physical optics propagation simulations to study the impact of aberrations on precise Doppler measurements made by diffraction-limited, high-resolution spectrographs. We quantify the uncertainties that cross-correlation techniques introduce in the presence of aberrations and barycentric RV shifts. We find that aberrations which shift the PSF photo-center in the dispersion direction, in particular primary horizontal coma and trefoil, are the most concerning. To maintain aberration-induced RV errors less than 10 cm/s, phase errors for these particular aberrations must be held well below 0.05 waves at the instrument operating wavelength. Our simulations further show that wavelength calibration only partially compensates for instrumental drifts, owing to a behavioral difference between how cross-correlation techniques handle aberrations between starlight versus calibration light. Identifying subtle physical effects that influence RV errors will help ensure that diffraction-limited planet-finding spectrographs are able to reach their full scientific potential.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
