Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFirst Planet Confirmation with a Dispersed Fixed-Delay Interferometer
81
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The Exoplanet Tracker is a prototype of a new type of fibre-fed instrument for performing high precision relative Doppler measurements to detect extra-solar planets. A combination of Michelson interferometer and medium resolution spectrograph, this low-cost instrument facilitates radial velocity measurements with high throughput over a small bandwidth (~ 300 Angstroms), and has the potential to be designed for multi-object operation with moderate bandwidths (~1000 Angstroms). We present the first planet detection with this new type of instrument, a successful confirmation of the well established planetary companion to 51 Peg, showing an rms precision of 11.5m/s over five days. We also show comparison measurements of the radial velocity stable star, Eta Cas, showing an rms precision of 7.9m/s over seven days. These new results are starting to approach the precision levels obtained with traditional radial velocity techniques based on cross-dispersed echelles. We anticipate that this new technique could have an important impact in the search for extra-solar planets.
rate research
Read More
We demonstrate the ability to measure precise stellar barycentric radial velocities with the dispersed fixed-delay interferometer technique using the Exoplanet Tracker (ET), an instrument primarily designed for precision differential Doppler velocity measurements using this technique. Our barycentric radial velocities, derived from observations taken at the KPNO 2.1 meter telescope, differ from those of Nidever et al. by 0.047 km/s (rms) when simultaneous iodine calibration is used, and by 0.120 km/s (rms) without simultaneous iodine calibration. Our results effectively show that a Michelson interferometer coupled to a spectrograph allows precise measurements of barycentric radial velocities even at a modest spectral resolution of R ~ 5100. A multi-object version of the ET instrument capable of observing ~500 stars per night is being used at the Sloan 2.5 m telescope at Apache Point Observatory for the Multi-object APO Radial Velocity Exoplanet Large-area Survey (MARVELS), a wide-field radial velocity survey for extrasolar planets around TYCHO-2 stars in the magnitude range 7.6<V<12. In addition to precise differential velocities, this survey will also yield precise barycentric radial velocities for many thousands of stars using the data analysis techniques reported here. Such a large kinematic survey at high velocity precision will be useful in identifying the signature of accretion events in the Milky Way and understanding local stellar kinematics in addition to discovering exoplanets, brown dwarfs and spectroscopic binaries.
The dispersed fixed-delay Intereferometer (DFDI) method is attractive for its low cost, compact size, and multiobject capability in precision radial-velocity (RV) measurements. The phase shift of fringes of stellar absorption lines is measured and then converted to an RV shift via an important parameter, phase-to-velocity scale (PV scale), determined by the group delay (GD) of a fixed-delay interferometer. Two methods of GD measurement using a DFDI Doppler instrument are presented in this article: (1) GD measurement using white-light combs gen- erated by the fixed-delay interferometer and (2) GD calibration using an RV reference star. These two methods provide adequate precision of GD measurement and calibration, given the current RV precision achieved by a DFDI Doppler instrument. They can potentially be used to measure GD of an fixed-delay interferometer for submeter- precision Doppler measurement with a DFDI instrument. Advantages and limitations of each method are discussed in detail. The two methods can serve as standard procedures of PV-scale calibration for DFDI instruments and cross- checks for each other.
The dispersed fixed-delay interferometer (DFDI) represents a new instrument concept for high-precision radial velocity (RV) surveys for extrasolar planets. A combination of Michelson interferometer and medium-resolution spectrograph, it has the potential for performing multi-object surveys, where most previous RV techniques have been limited to observing only one target at a time. Because of the large sample of extrasolar planets needed to better understand planetary formation, evolution, and prevalence, this new technique represents a logical next step in instrumentation for RV extrasolar planet searches, and has been proven with the single-object Exoplanet Tracker (ET) at Kitt Peak National Observatory, and the multi-object W. M. Keck/MARVELS Exoplanet Tracker at Apache Point Observatory. The development of the ET instruments has necessitated fleshing out a detailed understanding of the physical principles of the DFDI technique. Here we summarize the fundamental theoretical material needed to understand the technique and provide an overview of the physics underlying the instruments working. We also derive some useful analytical formulae that can be used to estimate the level of various sources of error generic to the technique, such as photon shot noise when using a fiducial reference spectrum, contamination by secondary spectra (e.g., crowded sources, spectroscopic binaries, or moonlight contamination), residual interferometer comb, and reference cross-talk error. Following this, we show that the use of a traditional gas absorption fiducial reference with a DFDI can incur significant systematic errors that must be taken into account at the precision levels required to detect extrasolar planets.
We propose a new type of experiment that compares the frequency of a clock (an ultra-stable optical cavity in this case) at time $t$ to its own frequency some time $t-T$ earlier, by storing the output signal (photons) in a fibre delay line. In ultra-light oscillating dark matter (DM) models, such an experiment is sensitive to coupling of DM to the standard model fields, through oscillations of the cavity and fibre lengths and of the fibre refractive index. Additionally, the sensitivity is significantly enhanced around the mechanical resonances of the cavity. We present experimental result of such an experiment and report no evidence of DM for masses in the [$4.1times 10^{-11}$, $8.3times 10^{-10}$]~eV region. In addition, we improve constraints on the involved coupling constants by one order of magnitude in a standard galactic DM model, at the mass corresponding to the resonant frequency of our cavity. Furthermore, in the model of relaxion DM, we improve on existing constraints over the whole DM mass range by about one order of magnitude, and up to six orders of magnitude at resonance.
Detecting exoplanets in clusters of different ages is a powerful tool for understanding a number of open questions, such as how the occurrence rate of planets depends on stellar metallicity, on mass, or on stellar environment. We present the first results of our HARPS long-term radial velocity (RV) survey which aims to discover exoplanets around intermediate-mass (between ~ 2 and 6 Msun) evolved stars in open clusters. We selected 826 bona fide HARPS observations of 114 giants from an initial list of 29 open clusters and computed the half peak-to-peak variability of the HARPS RV measurements, namely DeltaRV/2, for each target, to search for the best planet-host candidates. We also performed time series analysis for a few targets with enough observations to search for orbital solutions. Although we attempted to rule out the presence of binaries on the basis of previous surveys, we detected 14 new binary candidates in our sample, most of them identified from a comparison between HARPS and CORAVEL data. We also suggest 11 new planet-host candidates based on a relation between the stellar surface gravity and DeltaRV/2. Ten of the candidates have less than 3 Msun, showing evidence of a low planet occurrence rate for massive stars. One of the planet-host candidates and one of the binary candidates show very clear RV periodic variations, allowing us to confirm the discovery of a new planet and to compute the orbital solution for the binary. The planet is IC 4651 9122b, with a minimum mass of msini = 6.3 MJ and a semi-major axis a = 2.0 AU. The binary companion is NGC 5822 201B, with a very low minimum mass of msini = 0.11 Msun and a semi-major axis a = 6.5 AU, which is comparable to the Jupiter distance to the Sun.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
