Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOblique launching of optical surface waves by a subwavelength slit
178
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The electromagnetic field on the metal surface launched by a subwavelength slit is analytically studied, for the case when the fundamental mode inside the slit has a wavevector component along the slit axis (conical mount). Both near-field and far-field regions are discussed, and the role of surface plasmon-polaritons and Norton waves is revealed. It is shown that the distance from the slit at which NW are more intense than surface plasmons decrease with parallel wavevector, which could help experimental studies on Norton waves. Additionally, it is found that the s-polarization component, while present for any non-zero parallel wavevector, only weakly contributes to the NWs.
rate research
Read More
Micro-sized spheres can focus light into subwavelength spatial domains: a phenomena called photonic nanojet. Even though well studied in three-dimensional (3D) configurations, only a few attempts have been reported to observe similar phenomena in two-dimensional (2D) systems. This, however, is important to take advantage of photonic nanojets in integrated optical systems. Usually, surface plasmon polaritons are suggested for this purpose, but they suffer notoriously from the rather low propagation lengths due to intrinsic absorption. Here, we solve this problem and explore, theoretically, numerically, and experimentally, the use of Bloch surface waves sustained by a suitably structured all-dielectric media to enable subwavelength focusing in an integrated planar optical system. Since only a low index contrast can be achieved while relying on Bloch surface waves, we perceive a new functional element that allows a tight focusing and the observation of a photonic nanojet on top of the surface. We experimentally demonstrate a spot size of 0.66{lambda} in the effective medium. Our approach paves the way to 2D all-dielectric photonic chips for nano-particle manipulation in fluidic devices and sensing applications.
The reflectivity of a highly localized magnetic inhomogeneity is experimentally studied. The inhomogeneity is created by a dc-current carrying wire placed on the surface of a ferrite film. The reflection of propagating dipole-dominated spin-wave pulses is found to be strongly dependent on the spin-wave frequency if the current locally increases the magnetic field. In the opposite case the frequency dependence is negligible.
Evanescent wave amplification is observed, for the first time to our knowledge, inside a half-wavelength-thick wire medium slab used for subwavelength imaging. The wire medium is analyzed using both a spatially dispersive finite-difference time-domain (FDTD) method and a full-wave commercial electromagnetic simulator CST Microwave Studio. In this work we demonstrate that subwavelength details of a source placed at a distance of one-tenth of a wavelength from a wire medium slab can be detected inside the slab with a resolution of approximately one-tenth of a wavelength in spite of the fact that they cannot be resolved at the front interface of the device, due to the rapid decay of evanescent spatial harmonics in free space.
We present that surface two-plasmon resonance (STPR) in electron plasma sheet produced by femtosecond laser irradiating metal surface is the self-formation mechanism of periodic subwavelength ripple structures. Peaks of overdense electrons formed by resonant two-plasmon wave pull bound ions out of the metal surface and thus the wave pattern of STPR is carved on the surface by Coulomb ablation (removal) resulting from the strong electrostatic field induced by charge separation. To confirm the STPR model, we have performed analogical carving experiments by two laser beams with perpendicular polarizations. The results explicitly show that two wave patterns of STPR are independently carved on the exposure area of target surface. The time-scale of ablation dynamics and the electron temperature in ultrafast interaction are also verified by time-resolved spectroscopy experiment and numerical simulation, respectively. The present model can self-consistently explain the formation of subwavelength ripple structures even with spatial periods shorter than half of the laser wavelength, shedding light on the understanding of ultrafast laser-solid interaction.
We apply the technique of far-field interferometry to measure the properties of surface waves generated by two-dimensional (2D) single subwavelength slit-groove structures on gold films. The effective surface index of refraction measured for the surface wave propagating over a distance of more than 12 microns is determined to be 1.016 with a measurement uncertainty of 0.004, to within experimental uncertainty of the expected bound surface plasmon-polariton (SPP) value for a Au/Air interface of 1.018. We compare these measurements to finite-difference-time-domain (FDTD) numerical simulations of the optical field transmission through these devices. We find excellent agreement between the measurements and the simulations for the surface index of refraction. The measurements also show that the surface wave propagation parameter exhibits transient behavior close to the slit, evolving smoothly from greater values asymptotically toward the value expected for the SPP over the first 2-3 microns of slit-groove distance. This behavior is confirmed by the FDTD simulations.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
