The study of electromagnetism in electrical machines is critical, especially in the field of
design, investment and optimal performance. To achieve this, there are many ways in which
varying degrees of accuracy . The main aim of this piece of resea
rch is to study electromagnetic
fields distribution in 3ph-induction machines using computational numerical methods and proper
software, because these fields form the basic principle in machine 's work. It has been used the
finite element method aided computer to solve magnetic equations (Maxwell equations).
The simulation of magnetic field in induction machine performed by ANSYS-software. The
paper shows technique for finding the electromagnetic fields distribution in all parts inside 3phinduction
machine to get optimal design.
Induction motors are the most widely used electrical motors due to their reliability,
low cost and robustness. However, induction motors do not inherently have the capability
of variable speed operation. Due to this reason, earlier dc motors were a
pplied in most of
the electrical drives. But the recent developments in speed control methods of the induction
motor have led to their large scale use in almost all electrical drives.
Out of the several methods of speed control of an induction such as pole changing,
frequency variation, variable rotor resistance, variable stator voltage, constant V/f control,
slip recovery method etc, the closed loop constant V/f speed control method is most widely
used. In this method, the V/f ratio is kept constant which in turn maintains the magnetizing
flux constant so that the maximum torque remains unchanged. Thus, the motor is
completely utilized in this method.