The thickness of the diffusion layers was studied, along with the phases and the microstructure and
composition, across the depth in diffusion zone. The obtained results proved the effect of nitriding
system in the growth of the diffusion layers on
surface of double composite martensitic - austenitic alloy
steel.
Analysis of mechanical and tribological characteristics of treated double composite steel under dry
friction was also studied. It was found that diffusion treatment had a significant influence on work
capacity of tested alloy. Stability of alloy after nitriding was (2.5-4) times higher in magnitude
compared to untreated alloy.
فولاذ سبائكي ذو بنية مركبة
تقسية و إرجاع
نتردة غازية
بنية و تركيب طوري
طبقات انتشارية
قساوة سطحية
خواص ميكانيكية و تريبولوجية
Double composite alloy steel
hardening and tempering
gas nitriding
diffusion layers
microstructure and phase composition
surface hardness
mechanical and tribological properties
المزيد..
In the present work, the rheological and mechanical properties of
polypropylene /thermoplastic starch (PP/TPS) and acrylonitril-butadienestyrene/
thermoplastic starch (ABS/TPS) blends were investigated. Starch was
plasticized using glycerol, and b
lends were prepared using a laboratory scale
with single screw extruder. Rheological properties of the prepared blends were
determined using a capillary rheometer. Mechanical properties were studied in
term of tensile tests, stress at break, strain at break and Young's modulus were
determined.