اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدImpact of Differential Dust Settling on the SED and Polarization: Application to the Inner Region of the HL Tau Disk
223
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The polarimetric observations on the protoplanetary disk around HL Tau have shown the scattering-induced polarization at ALMA Band 7, which indicates that the maximum dust size is $sim 100~{rm mu m}$, while the Spectral Energy Distribution (SED) has suggested that the maximum dust size is $sim$ mm. To solve the contradiction, we investigate the impact of differential settling of dust grains on the SED and polarization. If the disk is optically thick, longer observing wavelength traces more interior layer which would be dominated by larger grains. We find that, the SED of the center part of the HL Tau disk can be explained with mm-sized grains for a broad range of turbulence strength, while $160~{rm mu m}$-sized grains can explain barely only if the turbulence strength parameter $alpha_{rm t}$ is lower than $10^{-5}$. We also find that the observed polarization fraction can be potentially explained with the maximum dust size of $1~{rm mm}$ if $alpha_{rm t}lesssim10^{-5}$, although models with $160~{rm mu m}$-sized grains are also acceptable. However, if the maximum dust size is $sim3~{rm mm}$, the simulated polarization fraction is too low to explain the observations even if the turbulence strength is extremely small, indicating the maximum dust size of $lesssim1$ mm. The degeneracy between 100 ${rm mu m}$-sized and mm-sized grains can be solved by improving the ALMA calibration accuracy or polarimetric observations at (sub-)cm wavelengths.
قيم البحث
اقرأ أيضاً
We conducted a detailed radiative transfer modeling of the dust emission from the circumstellar disk around HL Tau. The goal of our study is to derive the surface density profile of the inner disk and its structure. In addition to the Atacama Large M
illimeter/submillimeter Array images at Band 3 (2.9mm), Band 6 (1.3mm), and Band 7 (0.87mm), the most recent Karl G. Jansky Very Large Array (VLA) observations at 7mm were included in the analysis. A simulated annealing algorithm was invoked to search for the optimum model. The radiative transfer analysis demonstrates that most radial components (i.e., >6AU) of the disk become optically thin at a wavelength of 7mm, which allows us to constrain, for the first time, the dust density distribution in the inner region of the disk. We found that a homogeneous grain size distribution is not sufficient to explain the observed images at different wavelengths simultaneously, while models with a shallower grain size distribution in the inner disk work well. We found clear evidence that larger grains are trapped in the first bright ring. Our results imply that dust evolution has already taken place in the disk at a relatively young (i.e., ~1Myr) age. We compared the midplane temperature distribution, optical depth, and properties of various dust rings with those reported previously. Using the Toomre parameter, we briefly discussed the gravitational instability as a potential mechanism for the origin of the dust clump detected in the first bright ring via the VLA observations.
The mechanism of angular momentum transport in protoplanetary disks is fundamental to understand the distributions of gas and dust in the disks. The unprecedented, high spatial resolution ALMA observations taken toward HL Tau and subsequent radiative
transfer modeling reveal that a high degree of dust settling is currently achieved at the outer part of the HL Tau disk. Previous observations however suggest a high disk accretion rate onto the central star. This configuration is not necessarily intuitive in the framework of the conventional viscous disk model, since efficient accretion generally requires a high level of turbulence, which can suppress dust settling considerably. We develop a simplified, semi-analytical disk model to examine under what condition these two properties can be realized in a single model. Recent, non-ideal MHD simulations are utilized to realistically model the angular momentum transport both radially via MHD turbulence and vertically via magnetically induced disk winds. We find that the HL Tau disk configuration can be reproduced well when disk winds are properly taken into account. While the resulting disk properties are likely consistent with other observational results, such an ideal situation can be established only if the plasma $beta$ at the disk midplane is $beta_0 simeq 2 times 10^4$ under the assumption of steady accretion. Equivalently, the vertical magnetic flux at 100 au is about 0.2 mG. More detailed modeling is needed to fully identify the origin of the disk accretion and quantitatively examine plausible mechanisms behind the observed gap structures in the HL Tau disk.
Protoplanetary disks are dispersed by viscous evolution and photoevaporation in a few million years; in the interim small, sub-micron sized dust grains must grow and form planets. The time-varying abundance of small grains in an evolving disk directl
y affects gas heating by far-ultraviolet photons, while dust evolution affects photoevaporation by changing the disk opacity and resulting penetration of FUV photons in the disk. Photoevaporative flows, in turn, selectively carry small dust grains leaving the larger particles---which decouple from the gas---behind in the disk. We study these effects by investigating the evolution of a disk subject to viscosity, photoevaporation by EUV, FUV and X-rays, dust evolution, and radial drift using a 1-D multi-fluid approach (gas + different dust grain sizes) to solve for the evolving surface density distributions. The 1-D evolution is augmented by 1+1D models constructed at each epoch to obtain the instantaneous disk structure and determine photoevaporation rates. The implementation of a dust coagulation/fragmentation model results in a marginal decrease in disk lifetimes when compared to models with no dust evolution; the disk lifetime is thus found to be relatively insensitive to the evolving dust opacity. We find that photoevaporation can cause significant reductions in the gas/dust mass ratio in the planet-forming regions of the disk as it evolves, and may result in a corresponding increase in heavy element abundances relative to hydrogen. We discuss implications for theories of planetesimal formation and giant planet formation, including the formation of gas-poor giants. After gas disk dispersal, $sim 3times 10^{-4}$ ms of mass in solids typically remain, comparable to the solids inventory of our solar system.
By performing non-masked polarization imaging with Subaru/HiCIAO, polarized scattered light from the inner region of the disk around the GG Tau A system was successfully detected in the $H$ band with a spatial resolution of approximately 0.07$arcsec$
, revealing the complicated inner disk structures around this young binary. This paper reports the observation of an arc-like structure to the north of GG Tau Ab and part of a circumstellar structure that is noticeable around GG Tau Aa extending to a distance of approximately 28 AU from the primary star. The speckle noise around GG Tau Ab constrains its disk radius to <13 AU. Based on the size of the circumbinary ring and the circumstellar disk around GG Tau Aa, the semi-major axis of the binarys orbit is likely to be 62 AU. A comparison of the present observations with previous ALMA and near-infrared (NIR) H$_2$ emission observations suggests that the north arc could be part of a large streamer flowing from the circumbinary ring to sustain the circumstellar disks. According to the previous studies, the circumstellar disk around GG Tau Aa has enough mass and can sustain itself for a duration sufficient for planet formation; thus, our study indicates that planets can form within close (separation $lesssim$ 100 AU) young binary systems.
Dust polarization at (sub)millimeter wavelengths has been observed for many protoplanetary disks. Theoretically, multiple origins potentially contribute to the polarized emission but it is still uncertain what mechanism is dominant in disk millimeter
polarization. To quantitatively address the origin, we perform radiative transfer calculations of the mixture of alignment and self-scattering induced polarization to reproduce the 3.1 mm polarization of the HL Tau disk, which shows azimuthal pattern in polarization vectors. We find that a mixture of the grain alignment and self-scattering is essential to reproduce the HL Tau 3.1 mm polarization properties. Our model shows that the polarization of the HL Tau at 3.1 mm can be decomposed to be the combination of the self-scattering parallel to the minor axis and the alignment-induced polarization parallel to the major axis, with the orders of $sim 0.5%$ fraction for each component. This slightly eases the tight constraints on the grain size of $sim 70~{rm~mu m}$ to be $sim 130 {rm~mu m}$ in the previous studies but further modeling is needed. In addition, the grain alignment model requires effectively prolate grains but the physics to reproduce it in protoplanetary disks is still a mystery.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
