ترغب بنشر مسار تعليمي؟ اضغط هنا

Accuracy, Stability, and Performance Comparison between the Spectral Difference and Flux Reconstruction Schemes

92   0   0.0 ( 0 )
 نشر من قبل Christopher Cox
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We report the development of a discontinuous spectral element flow solver that includes the implementation of both spectral difference and flux reconstruction formulations. With this high order framework, we have constructed a foundation upon which to provide a fair and accurate assessment of these two schemes in terms of accuracy, stability, and performance with special attention to the true spectral difference scheme and the modified spectral difference scheme recovered via the flux reconstruction formulation. Building on previous analysis of the spectral difference and flux reconstruction schemes, we provide a novel nonlinear stability analysis of the spectral difference scheme. Through various numerical experiments, we demonstrate the additional stability afforded by the true, baseline spectral difference scheme without explicit filtering or de-aliasing due to its inherent feature of staggered flux points. This arrangement leads to favorable suppression of aliasing errors and improves stability needed for under-resolved simulations of turbulent flows.



قيم البحث

اقرأ أيضاً

With a noticeable increase in research centered on modeling micro fluid interfaces in the framework of mesoscopic methods, we conduct an exhaustive study of discrete unified gas-kinetics scheme (DUGKS) in handling complicated interface deformations. High-order isotropic finite-difference schemes are first utilized in DUGKS to improve its capability in tracking interfaces. The performance of third-stage third-order DUGKS where source term is incorporated has also been assessed for the first time and a series of numerical tests have been conducted to investigate their capability. The comparative analysis have revealed the reason why the performance of lattice Boltzmann method is superior to that of discrete velocity method and DUGKS in general condition from an informed perspective. The mechanism behind the performance distinction between the central scheme and upwind scheme utilized in meso-flux construction in DUGKS have also been clarified. Numerical results have shown that the employment of high-order schemes in DUGKS does have an effect on the reduction of numerical dissipation, but the overall accuracy of this method is limited by the precision of prediction of source terms on mesh interface. The capability of third-stage third-order DUGKS is severely inhibited by its intrinsic limitation of the ratio of time step to particle collision time. Among the various kinds of DUGKS employed with different reconstruction methods, the most promising scheme is the one with third-order isotropic reconstruction and upwind-based meso-flux evaluation, which is able to ensure an unique balance between efficiency and accuracy.
Computing the solution of linear systems of equations is invariably the most time consuming task in the numerical solutions of PDEs in many fields of computational science. In this study, we focus on the numerical simulation of cardiovascular hemodyn amics with rigid and deformable walls, discretized in space and time through the variational multi-scale finite element method. We focus on three approaches: the problem agnostic generalized minimum residual (GMRES) and stabilized bi-conjugate gradient (BICGS) methods, and a recently proposed, problem specific, bi-partitioned (BIPN) method. We also perform a comparative analysis of several preconditioners, including diagonal, block-diagonal, incomplete factorization, multi-grid, and resistance based methods. Solver performance and matrix characteristics (diagonal dominance, symmetry, sparsity, bandwidth and spectral properties) are first examined for an idealized cylindrical geometry with physiologic boundary conditions and then successively tested on several patient-specific anatomies representative of realistic cardiovascular simulation problems. Incomplete factorization pre-conditioners provide the best performance and results in terms of both strong and weak scalability. The BIPN method was found to outperform other methods in patient-specific models with rigid walls. In models with deformable walls, BIPN was outperformed by BICG with diagonal and Incomplete LU preconditioners.
A new simulation method for solving fluid-structure coupling problems has been developed. All the basic equations are numerically solved on a fixed Cartesian grid using a finite difference scheme. A volume-of-fluid formulation (Hirt and Nichols (1981 , J. Comput. Phys., 39, 201)), which has been widely used for multiphase flow simulations, is applied to describing the multi-component geometry. The temporal change in the solid deformation is described in the Eulerian frame by updating a left Cauchy-Green deformation tensor, which is used to express constitutive equations for nonlinear Mooney-Rivlin materials. In this paper, various verifications and validations of the present full Eulerian method, which solves the fluid and solid motions on a fixed grid, are demonstrated, and the numerical accuracy involved in the fluid-structure coupling problems is examined.
We show that a recently introduced stochastic thermostat [J. Chem. Phys. 126 (2007) 014101] can be considered as a global version of the Langevin thermostat. We compare the global scheme and the local one (Langevin) from a formal point of view and th rough practical calculations on a model Lennard-Jones liquid. At variance with the local scheme, the global thermostat preserves the dynamical properties for a wide range of coupling parameters, and allows for a faster sampling of the phase-space.
74 - Haiyan Chen , Yue Zeng , Yi Li 2020
The secondary Bjerknes force plays a significant role in the evolution of bubble clusters. However, due to the complex dependence of the force on multiple parameters, it is highly non-trivial to include the effects of this force in the simulations of bubble clusters. In this paper, machine learning is used to develop a data-driven model for the secondary Bjerknes force between two insonated bubbles as a function of the equilibrium radii of the bubbles, the distance between the bubbles, the amplitude and the frequency of the pressure. The force varies over several orders of magnitude, which poses a serious challenge for the usual machine learning models. To overcome this difficulty, the magnitudes and the signs of the force are separated and modelled separately. A nonlinear regression is obtained with a feed-forward network model for the logarithm of the magnitude, whereas the sign is modelled by a support-vector machine model. The principle, the practical aspects related to the training and validation of the machine models are introduced. The predictions from the models are checked against the values computed from the Keller-Miksis equations. The results show that the models are extremely efficient while providing accurate estimate of the force. The models make it computationally feasible for the future simulations of the bubble clusters to include the effects of the secondary Bjerknes force.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا