اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCurrent-induced switching of YIG/Pt bilayers with in-plane magnetization due to Oersted fields
73
0
0.0
(
0
)
تأليف
Johannes Mendil
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We report on the switching of the in-plane magnetization of thin yttrium iron garnet (YIG)/Pt bilayers induced by an electrical current. The switching is either field-induced and assisted by a dc current, or current-induced and assisted by a static magnetic field. The reversal of the magnetization occurs at a current density as low as $10^5$~A/cm$^{2}$ and magnetic fields of $sim 40$~$mu$T, two orders of magnitude smaller than in ferromagnetic metals, consistently with the weak uniaxial anisotropy of the YIG layers. We use the transverse component of the spin Hall magnetoresistance to sense the magnetic orientation of YIG while sweeping the current. Our measurements and simulations reveal that the current-induced effective field responsible for switching is due to the Oersted field generated by the current flowing in the Pt layer rather than by spin-orbit torques, and that the switching efficiency is influenced by pinning of the magnetic domains.
قيم البحث
اقرأ أيضاً
We measure the ordinary and the anomalous Hall effect in a set of yttrium iron garnet$|$platinum (YIG$|$Pt) bilayers via magnetization orientation dependent magnetoresistance experiments. Our data show that the presence of the ferrimagnetic insulator
YIG leads to an anomalous Hall like signature in Pt, sensitive to both Pt thickness and temperature. Interpretation of the experimental findings in terms of the spin Hall anomalous Hall effect indicates that the imaginary part of the spin mixing interface conductance $G_{mathrm{i}}$ plays a crucial role in YIG$|$Pt bilayers. In particular, our data suggest a sign change in $G_{mathrm{i}}$ between $10,mathrm{K}$ and $300,mathrm{K}$. Additionally, we report a higher order Hall effect, which appears in thin Pt films on YIG at low temperatures.
We report an investigation of temperature and IrMn layered thickness dependence of anomalous-Hall resistance (AHR), anisotropic magnetoresistance (AMR), and magnetization on Pt/Ir20Mn80/Y3Fe5O12 (Pt/IrMn/YIG) heterostructures. The magnitude of AHR is
dramatically enhanced compared with Pt/YIG bilayers. The enhancement is much more profound at higher temperatures and peaks at the IrMn thickness of 3 nm. The observed spin-Hall magnetoresistance (SMR) in the temperature range of 10-300 K indicates that the spin current generated in the Pt layer can penetrate the entire thickness of the IrMn layer to interact with the YIG layer. The lack of conventional anisotropic magnetoresistance (CAMR) implies that the insertion of the IrMn layer between Pt and YIG efficiently suppresses the magnetic proximity effect (MPE) on induced Pt moments by YIG. Our results suggest that the dual roles of the InMn insertion in Pt/IrMn/YIG heterostructures are to block the MPE and to transport the spin current between Pt and YIG layers. We discuss possible mechanisms for the enhanced AHR.
In this work, we propose helicity-dependent switching (HDS) of magnetization of Co/Pt for energy efficient optical receiver. Designing a low power optical receiver for optical-to-electrical signal conversion has proven to be very challenging. Current
day receivers use a photodiode that produces a photocurrent in response to input optical signals, and power hungry trans-impedance amplifiers are required to amplify the small photocurrents. Here, we propose light helicity induced switching of magnetization to overcome the requirement of photodiodes and subsequent trans-impedance amplification by sensing the change in magnetization with a magnetic tunnel junction (MTJ). Magnetization switching of a thin ferromagnet layer using circularly polarized laser pulses have recently been demonstrated which shows one-to-one correspondence between light helicity and the magnetization state. We propose to utilize this phenomena by using digital input dependent circularly polarized laser pulses to directly switch the magnetization state of a thin Co/Pt ferromagnet layer at the receiver. The Co/Pt layer is used as the free layer of an MTJ, the resistance of which is modified by the laser pulses. With the one-to-one dependence between input data and output magnetization state, the MTJ resistance is directly converted to digital output signal. Our device to circuit level simulation results indicate that, HDS based optical receiver consumes only 0.124 pJ/bit energy, which is much lower than existing techniques.
Ferrimagnetic insulators (FiMI) have been intensively used in microwave and magneto-optical devices as well as spin caloritronics, where their magnetization direction plays a fundamental role on the device performance. The magnetization is generally
switched by applying external magnetic fields. Here we investigate current-induced spin-orbit torque (SOT) switching of the magnetization in Y3Fe5O12 (YIG)/Pt bilayers with in-plane magnetic anisotropy, where the switching is detected by spin Hall magnetoresistance. Reversible switching is found at room temperature for a threshold current density of 10^7 A cm^-2. The YIG sublattices with antiparallel and unequal magnetic moments are aligned parallel or antiparallel to the direction of current pulses, which is consistent to the Neel order switching in antiferromagnetic system. It is proposed that such a switching behavior may be triggered by the antidamping-torque acting on the two antiparallel sublattices of FiMI. Our finding not only broadens the magnetization switching by electrical means and promotes the understanding of magnetization switching, but also paves the way for all-electrically modulated microwave devices and spin caloritronics with low power consumption.
Metal-to-insulator transitions (MIT) can be driven by a number of different mechanisms, each resulting in a different type of insulator -- Change in chemical potential can induce a transition from a metal to a band insulator; strong correlations can
drive a metal into a Mott insulator with an energy gap; an Anderson transition, on the other hand, due to disorder leads to a localized insulator without a gap in the spectrum. Here we report the discovery of an alternative route for MIT driven by the creation of a network of narrow channels. Transport data on Pt substituted for Ti in TiSe$_2$ shows a dramatic increase of resistivity by five orders of magnitude for few % of Pt substitution, with a power-law dependence of the temperature-dependent resistivity $rho(T)$. Our scanning tunneling microscopy data show that Pt induces an irregular network of nanometer-thick domain walls (DWs) of charge density wave (CDW) order, which pull charge carriers out of the bulk and into the DWs. While the CDW domains are gapped, the charges confined to the narrow DWs interact strongly, with pseudogap-like suppression in the local density of states, even when they were weakly interacting in the bulk, and scatter at the DW network interconnects thereby generating the highly resistive state. Angle-resolved photoemission spectroscopy spectra exhibit pseudogap behavior corroborating the spatial coexistence of gapped domains and narrow domain walls with excess charge carriers.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
