ترغب بنشر مسار تعليمي؟ اضغط هنا

Lyman alpha Radiative Transfer in Cosmological Simulations using Adaptive Mesh Refinement

187   0   0.0 ( 0 )
 نشر من قبل Jesper Sommer-Larsen
 تاريخ النشر 2009
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

A numerical code for solving various Lyman alpha (Lya) radiative transfer (RT) problems is presented. The code is suitable for an arbitrary, three-dimensional distribution of Lya emissivity, gas temperature, density, and velocity field. Capable of handling Lya RT in an adaptively refined grid-based structure, it enables detailed investigation of the effects of clumpiness of the interstellar (or intergalactic) medium. The code is tested against various geometrically and physically idealized configurations for which analytical solutions exist, and subsequently applied to three Lyman-break galaxies, extracted from high-resolution cosmological simulations at redshift z = 3.6. Proper treatment of the Lya scattering reveals a diversity of surface brightness (SB) and line profiles. Specifically, for a given galaxy the maximum observed SB can vary by an order of magnitude, and the total flux by a factor of 3 - 6, depending on the viewing angle. This may provide an explanation for differences in observed properties of high-redshift galaxies, and in particular a possible physical link between Lyman-break galaxies and regular Lya emitters.



قيم البحث

اقرأ أيضاً

We have explored the evolution of gas distributions from cosmological simulations carried out using the RAMSES adaptive mesh refinement (AMR) code, to explore the effects of resolution on cosmological hydrodynamical simulations. It is vital to unders tand the effect of both the resolution of initial conditions and the final resolution of the simulation. Lower initial resolution simulations tend to produce smaller numbers of low mass structures. This will strongly affect the assembly history of objects, and has the same effect of simulating different cosmologies. The resolution of initial conditions is an important factor in simulations, even with a fixed maximum spatial resolution. The power spectrum of gas in simulations using AMR diverges strongly from the fixed grid approach - with more power on small scales in the AMR simulations - even at fixed physical resolution and also produces offsets in the star formation at specific epochs. This is because before certain times the upper grid levels are held back to maintain approximately fixed physical resolution, and to mimic the natural evolution of dark matter only simulations. Although the impact of hold back falls with increasing spatial and initial-condition resolutions, the offsets in the star formation remain down to a spatial resolution of 1 kpc. These offsets are of order of 10-20%, which is below the uncertainty in the implemented physics but are expected to affect the detailed properties of galaxies. We have implemented a new grid-hold-back approach to minimize the impact of hold back on the star formation rate.
We use high resolution Eulerian hydrodynamics simulations to study kinematic properties of the low ionization species in damped Ly-alpha systems at redshift z=3. Our adaptive mesh refinement simulations include most key ingredients relevant for model ing neutral gas in high-column density absorbers: hydrodynamics, gravitational collapse, continuum radiative transfer and gas chemistry, but no star formation. We model high-resolution Keck spectra with unsaturated low ion transitions in two Si II lines (1526 and 1808 A), and compare simulated line profiles to the data from the SDSS DLA survey. We find that with increasing grid resolution the models show a trend in convergence towards the observed distribution of HI column densities. While in our highest resolution model we recover the cumulative number of DLAs per unit absorption distance, none of our models predicts DLA velocity widths as high as indicated by the data, suggesting that feedback from star formation might be important. At z=3 a non-negligible fraction of DLAs with column densities below 10^21 cm^-2 is caused by tidal tails due to galaxy-galaxy interactions in more massive halo environments. Lower column density absorbers with N_HI < 10^21.4 cm^-2 are sensitive to changes in the UV background resulting in a 10% reduction of the cumulative number of DLAs for twice the quasar background relative to the fiducial value. We find that the mass cut-off below which a large fraction of dwarf galaxies cannot retain gas after reionization is 7*10^7 msun, lower than the previous estimates. Finally, we show that models with self-shielding commonly used in the literature produce significantly lower DLA velocity widths than the full radiative transfer runs.
We study the effect of local stellar radiation and UVB on the physical properties of DLAs and LLSs at z=3 using cosmological SPH simulations. We post-process our simulations with the ART code for radiative transfer of local stellar radiation and UVB. We find that the DLA and LLS cross sections are significantly reduced by the UVB, whereas the local stellar radiation does not affect them very much except in the low-mass halos. This is because clumpy high-density clouds near young star clusters effectively absorb most of the ionizing photons from young stars. We also find that the UVB model with a simple density threshold for self-shielding effect can reproduce the observed column density distribution function of DLAs and LLSs very well, and we validate this model by direct radiative transfer calculations of stellar radiation and UVB with high angular resolution. We show that, with a self-shielding treatment, the DLAs have an extended distribution around star-forming regions typically on ~ 10-30 kpc scales, and LLSs are surrounding DLAs on ~ 30-60 kpc scales. Our simulations suggest that the median properties of DLA host haloes are: Mh = 2.4*10^10 Msun, SFR = 0.3 Msun/yr, M* = 2.4*10^8 Msun, and Z/Zsun = 0.1. About 30 per cent of DLAs are hosted by haloes having SFR = 1 - 20 Msun/yr, which is the typical SFR range for LBGs. More than half of DLAs are hosted by the LBGs that are fainter than the current observational limit. Our results suggest that fractional contribution to LLSs from lower mass haloes is greater than for DLAs. Therefore the median values of LLS host haloes are somewhat lower with Mh = 9.6*10^9 Msun, SFR = 0.06 Msun/yr, M* = 6.5*10^7 Msun and Z/Zsun = 0.08. About 80 per cent of total LLS cross section are hosted by haloes with SFR < 1 Msun/yr, hence most LLSs are associated with low-mass halos with faint LBGs below the current detection limit.
Wildland fires are complex multi-physics problems that span wide spatial scale ranges. Capturing this complexity in computationally affordable numerical simulations for process studies and outer-loop techniques (e.g., optimization and uncertainty qua ntification) is a fundamental challenge in reacting flow research. Further complications arise for propagating fires where a priori knowledge of the fire spread rate and direction is typically not available. In such cases, static mesh refinement at all possible fire locations is a computationally inefficient approach to bridging the wide range of spatial scales relevant to wildland fire behavior. In the present study, we address this challenge by incorporating adaptive mesh refinement (AMR) in fireFoam, an OpenFOAM solver for simulations of complex fire phenomena. The AMR functionality in the extended solver, called wildFireFoam, allows us to dynamically track regions of interest and to avoid inefficient over-resolution of areas far from a propagating flame. We demonstrate the AMR capability for fire spread on vertical panels and for large-scale fire propagation on a variable-slope surface that is representative of real topography. We show that the AMR solver reproduces results obtained using much larger statically refined meshes, at a substantially reduced computational cost.
We present new results characterizing cosmological shocks within adaptive mesh refinement N-Body/hydrodynamic simulations that are used to predict non-thermal components of large-scale structure. This represents the first study of shocks using adapti ve mesh refinement. We propose a modified algorithm for finding shocks from those used on unigrid simulations that reduces the shock frequency of low Mach number shocks by a factor of ~3. We then apply our new technique to a large, (512 Mpc/h)^3, cosmological volume and study the shock Mach number (M) distribution as a function of pre-shock temperature, density, and redshift. Because of the large volume of the simulation, we have superb statistics that results from having thousands of galaxy clusters. We find that the Mach number evolution can be interpreted as a method to visualize large-scale structure formation. Shocks with Mach<5 typically trace mergers and complex flows, while 5<Mach<20 and Mach>20 generally follow accretion onto filaments and galaxy clusters, respectively. By applying results from nonlinear diffusive shock acceleration models using the first-order Fermi process, we calculate the amount of kinetic energy that is converted into cosmic ray protons. The acceleration of cosmic ray protons is large enough that in order to use galaxy clusters as cosmological probes, the dynamic response of the gas to the cosmic rays must be included in future numerical simulations.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا