اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدExperimental confirmation of the delayed Ni demagnetization in FeNi alloy
166
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Element-selective techniques are central for the understanding of ultrafast spin dynamics in multi-element materials like magnetic alloys. Recently, though, it turned out that the commonly used technique of transverse magneto-optical Kerr effect (T-MOKE) in the EUV range may have linearity issues including unwanted cross talk between different elemental signals. This problem can be sizeable, which puts recent observations of ultrafast spin transfer from Fe to Ni sites in FeNi alloys into question. In this study, we investigate the Fe-to-Ni spin transfer in a cross-talk-free time-resolved X-ray magnetic circular dichroism (XMCD) experiment with a reliable time reference. We find a very similar Fe and Ni dynamics with XMCD as with T-MOKE from identical samples. Considering the non-linearities of the T-MOKE response, the agreement with our findings appears fortuitous. We discuss possible reasons why T-MOKE seems to give accurate results in this case. Our data provide the ongoing discussion about ultrafast spin-transfer mechanisms in FeNi systems with a sound experimental basis.
قيم البحث
اقرأ أيضاً
Ni$_{80}$Fe$_{20}$ (Py) and Py-Cu exhibit intriguing ultrafast demagnetization behavior, where the Ni magnetic moment shows a delayed response relative to the Fe [S. Mathias et al., PNAS {bf 109}, 4792 (2012)]. To unravel the mechanism responsible fo
r this behavior, we have studied Py-Cu alloys for a wide range of Cu concentrations using X-ray magnetic circular dichroism (XMCD). The magnetic moments of Fe and Ni are found to respond very differently to Cu alloying: Fe becomes a strong ferromagnet in Py, with the magnetic moment largely unaffected by Cu alloying. In contrast, the Ni magnetic moment decreases continuously with increasing Cu concentration. Our results are corroborated by ab-initio calculations of the electronic structure, which we discuss in the framework of virtual bound states (VBSs). For high Cu concentrations, Ni exhibits VBSs below the Fermi level, which are likely responsible for an increased orbital/spin magnetic ratio at high Cu concentrations. Fe exhibits VBSs in the minority band, approximately 1 eV above the Fermi level in pure Py, that move closer to the Fermi level upon Cu alloying. A strong interaction between the VBSs and excited electrons above the Fermi level enhances the formation of localized magnons at Fe sites, which explains the different behavior between Fe and Ni during ultrafast demagnetization.
We have experimentally studied the effects on the spin Hall angle due to systematic addition of Pt into the light metal Cu. We perform spin torque ferromagnetic resonance measurements on Py/CuPt bilayer and find that as the Pt concentration increases
, the spin Hall angle of CuPt alloy increases. Moreover, only 28% Pt in CuPt alloy can give rise to a spin Hall angle close to that of Pt. We further extract the spin Hall resistivity of CuPt alloy for different Pt concentrations and find that the contribution of skew scattering is larger for lower Pt concentrations, while the side-jump contribution is larger for higher Pt concentrations. From technological perspective, since the CuPt alloy can sustain high processing temperatures and Cu is the most common metallization element in the Si platform, it would be easier to integrate the CuPt alloy based spintronic devices into existing Si fabrication technology.
Magnetic shape memory Heusler alloys are multiferroics stabilized by the correlations between electronic, magnetic and structural order. To study these correlations we use time resolved x-ray diffraction and magneto-optical Kerr effect experiments to
measure the laser induced dynamics in a Heusler alloy Ni$_2$MnGa film and reveal a set of timescales intrinsic to the system. We observe a coherent phonon which we identify as the amplitudon of the modulated structure and an ultrafast phase transition leading to a quenching of the incommensurate modulation within 300~fs with a recovery time of a few ps. The thermally driven martensitic transition to the high temperature cubic phase proceeds via nucleation within a few ps and domain growth limited by the speed of sound. The demagnetization time is 320~fs, which is comparable to the quenching of the structural modulation.
Irradiation effects in Ni-17Mo-7Cr alloy, which is an newly developed structural material for molten salt reactor (MSR), have been systematically investigated by using 3MeV Au ions at different fluences, corresponding to dpa number (displacement per
atom) of 1~ 30. GIXRD measurement indicates that the microstrain of the irradiated samples increased from 0.14% to 0.22% as dpa increased from 1 to 30. In the meanwhile, nanoindentation results reveal the Ni-17Mo-7Cr alloy underwent radiation-induced hardening first and then softening at dpa of 30. The swelling rate of Ni-17Mo-7Cr alloy was found around 1.3% at 30 dpa, which means only 0.04% per dpa. Besides, Raman spectra shows that carbon segregation appeared after Au ions irradiation. Our results are very helpful for understanding irradiation damages in Nickel-base alloys, especially for those in purpose of being used in future MSR nuclear energy system.
Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resu
lting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformation after initial stress-induced forward transformation. To this end, utilizing ab-initio simulations and thermodynamic calculations we designed and produced a V45Ti30Ni25 (at%) alloy. In this alloy, TiNi is present as nano-precipitates uniformly distributed within a ductile V-rich base-centered cubic (bcc) beta matrix, as well as being present as a larger matrix phase. We characterized the microstructure of the produced alloy using various scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The bulk mechanical properties of the alloy are demonstrated through tensile tests, and the reversible transformation in each of the TiNi morphologies were confirmed by in-situ TEM micro-pillar compression experiments, in-situ high-energy diffraction synchrotron cyclic tensile tests, indentation experiments, and differential scanning calorimetry experiments. The observed transformation pathways and variables impacting phase stability are critically discussed
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
