اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSimulations of Intracycle Angular Velocity Control for a Cross-Flow Turbine
156
0
0.0
(
0
)
تأليف
Mukul Dave
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Straight-bladed cross-flow turbines are computationally explored for harvesting energy in wind and water currents. One challenge for cross-flow turbines is the transient occurrence of high apparent angles of attack on the blades that reduces efficiency due to flow separation. This paper explores kinematic manipulation of the apparent angle of attack through intracycle control of the angular velocity. Using an unsteady Reynolds-averaged Navier-Stokes (URANS) model at moderate Reynolds numbers, the kinematics and associated flow physics are explored for confined and unconfined configurations. The computations demonstrate an increase in turbine efficiency up to 54%, very closely matching the benefits shown by previous intracycle control experiments. Simulations display the time-evolution of angle of attack and flow velocity relative to the blade, which are modified with sinusoidal angular velocity such that the peak torque generation aligns with the peak angular velocity. With optimal kinematics in a confined flow there is minimal flow separation during peak power generation, however there is a large trailing edge vortex (TEV) shed as the torque decreases. The unconfined configuration has more prominent flow separation and is more susceptible to Reynolds number, resulting in a 41% increase in power generation under the same kinematic conditions as the confined flow.
قيم البحث
اقرأ أيضاً
This article describes a video uploaded to the APS DFD Annual Meeting 2009 Gallery of Fluid Motion. The video contains both animations and still images from a three-dimensional volumetric velocimetry measurement set acquired in the flow around a Rushton turbine.
Super-large-scale particle image velocimetry (SLPIV) using natural snowfall is used to investigate the influence of nacelle and tower generated flow structures on the near-wake of a 2.5 MW wind turbine at the EOLOS field station. The analysis is base
d on the data collected in a field campaign on March 12th, 2017, with a sample area of 125 m (vertical) x 70 m (streamwise) centred on the plane behind the turbine support tower. The SLPIV measurement provides the velocity field over the entire rotor span, revealing a region of accelerated flow around the hub caused by the reduction in axial induction at the blade roots. The in-plane turbulent kinetic energy field shows an increase in turbulence in the regions of large shear behind the blade tips and the hub, and a reduction in turbulence behind the tower where the large-scale turbulent structures in the boundary layer are broken up. Snow voids reveal coherent structures shed from the blades, nacelle, and tower. The hub wake meandering frequency is quantified and found to correspond to the vortex shedding frequency of an Ahmed body (St=0.06). Persistent hub wake deflection is observed and shown to be connected with the turbine yaw error. In the region below the hub, strong interaction between the tower- and blade-generated structures is observed. The temporal characteristics of this interaction are quantified by the co-presence of two dominant frequencies, one corresponding to the blade vortex shedding at the blade pass frequency and the other corresponding to tower vortex shedding at St=0.2. This study highlights the influence of the tower and nacelle on the behaviour of the near-wake, informing model development and elucidating the mechanisms that influence wake evolution.
Lattice Boltzmann (LB) models used for the computation of fluid flows represented by the Navier-Stokes (NS) equations on standard lattices can lead to non-Galilean invariant (GI) viscous stress involving cubic velocity errors. This arises from the de
pendence of their third order diagonal moments on the first order moments for standard lattices, and strategies have recently been introduced to restore GI without such errors using a modified collision operator involving either corrections to the relaxation times or to the moment equilibria. Convergence acceleration in the simulation of steady flows can be achieved by solving the preconditioned NS equations, which contain a preconditioning parameter that alleviates the numerical stiffness. In the present study, we present a GI formulation of the preconditioned cascaded central moment LB method used to solve the preconditioned NS equations, which is free of cubic velocity errors on a standard lattice. A Chapman-Enskog analysis reveals the structure of the spurious non-GI defect terms and it is demonstrated that the anisotropy of the resulting viscous stress is dependent on the preconditioning parameter, in addition to the fluid velocity. It is shown that partial correction to eliminate the cubic velocity defects is achieved by scaling the cubic velocity terms in the off-diagonal third-order moment equilibria with the square of the preconditioning parameter. Furthermore, we develop additional corrections based on the extended moment equilibria involving gradient terms with coefficients dependent locally on the fluid velocity and the preconditioning parameter. Several conclusions are drawn from the analysis of the structure of the non-GI errors and the associated corrections, with particular emphasis on their dependence on the preconditioning parameter. Improvements in accuracy and convergence acceleration are demonstrated.
Reversible pump turbines are praised for their operational flexibility leading to their recent wide adoption within pumped storage hydropower plants. However, frequently imposed off-design operating conditions in these plants give rise to large flow
instability within RPT flow zones, where the vaneless space (VS) between the runner and guide vanes is claimed to be the base. Recent studies have pointed out the possibility of these instabilities stretching to other flow zones causing more losses and subsequent machine operational performance degradation. This study therefore intends to investigate the VS flow instability, its propagation characteristics, and the effect of machine influx and runner blade number on the same. CFD-backed simulations are conducted on ten flow conditions spanning from turbine zone through runaway vicinities to turbine brake (OC1 to OC15), using three runner models with different blades (7BL, 8BL, and 9BL). While VS pressure pulsation amplitudes increased with runner blades number decrease, the continuously decreasing flow led to gradual VS pressure pulsation level drop within the Turbine zone before increasing to Runaway and dropping back to deep turbine brake zone. The effect of the same parameters on the transmission mode to VS upstream flow zones is more remarkable than the downstream flow zones.
We study the joint probability distributions of separation, $R$, and radial component of the relative velocity, $V_{rm R}$, of particles settling under gravity in a turbulent flow. We also obtain the moments of these distributions and analyze their a
nisotropy using spherical harmonics. We find that the qualitative nature of the joint distributions remains the same as no gravity case. Distributions of $V_{rm R}$ for fixed values of $R$ show a power-law dependence on $V_{rm R}$ for a range of $V_{rm R}$, exponent of the power-law depends on the gravity. Effects of gravity are also manifested in the following ways: (a) moments of the distributions are anisotropic; the degree of anisotropy depends on particles Stokes number, but does not depend on $R$ for small values of $R$. (b) mean velocity of collision between two particles is decreased for particles having equal Stokes numbers but increased for particles having different Stokes numbers. For the later, collision velocity is set by the difference in their settling velocities.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
