ترغب بنشر مسار تعليمي؟ اضغط هنا

Origin of Mechanical and Dielectric Losses from Two-Level Systems in Amorphous Silicon

58   0   0.0 ( 0 )
 نشر من قبل Manel Molina-Ruiz
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Amorphous silicon contains tunneling two-level systems, which are the dominant energy loss mechanisms for amorphous solids at low temperatures. These two-level systems affect both mechanical and electromagnetic oscillators and are believed to produce thermal and electromagnetic noise and energy loss. However, it is unclear whether the two-level systems that dominate mechanical and dielectric losses are the same; the former relies on phonon-TLS coupling, with an elastic field coupling constant, $gamma$, while the latter depends on a TLS dipole moment, $p_0$, which couples to the electromagnetic field. Mechanical and dielectric loss measurements as well as structural characterization were performed on amorphous silicon thin films grown by electron beam deposition with a range of growth parameters. Samples grown at 425 $^{circ}$C show a large reduction of mechanical loss (34 times) and a far smaller reduction of dielectric loss (2.3 times) compared to those grown at room temperature. Additionally, mechanical loss shows lower loss per unit volume for thicker films, while dielectric loss shows lower loss per unit volume for thinner films. Analysis of these results indicate that mechanical loss correlates with atomic density, while dielectric loss correlates with dangling bond density, suggesting a different origin for these two energy dissipation processes in amorphous silicon.

قيم البحث

اقرأ أيضاً

118 - M. Molina-Ruiz 2018
Specific heat measurements from 2 to 300 K of hydrogenated amorphous silicon prepared by hot-wire chemical vapor deposition show a large excess specific heat at low temperature, significantly larger than the Debye specific heat calculated from the so und velocity. The as-prepared films have a Schottky anomaly that is associated with metastable hydrogen in the amorphous network, as well as large linear and excess cubic term commonly associated with tunneling two-level systems in amorphous solids. Annealing at 200 {deg}C, a temperature that enables hydrogen mobility but not evaporation, irreversibly reduces the heat capacity, eliminating the Schottky anomaly and leaving a reduced linear heat capacity. A non-monotonic dependence on growth temperature and H content is observed in all effects, except for sound velocity, which suggests that the tunneling two-level systems and the Schottky anomaly are associated with atomic hydrogen and require low density regions to form, while sound velocity is associated with the silicon network and improves with increasing growth temperature.
67 - D.R. Queen , X. Liu , J. Karel 2015
In $e$-beam evaporated amorphous silicon ($a$-Si), the densities of two-level systems (TLS), $n_{0}$ and $overline{P}$, determined from specific heat $C$ and internal friction $Q^{-1}$ measurements, respectively, have been shown to vary by over three orders of magnitude. Here we show that $n_{0}$ and $overline{P}$ are proportional to each other with a constant of proportionality that is consistent with the measurement time dependence proposed by Black and Halperin and does not require the introduction of additional anomalous TLS. However, $n_{0}$ and $overline{P}$ depend strongly on the atomic density of the film ($n_{rm Si}$) which depends on both film thickness and growth temperature suggesting that the $a$-Si structure is heterogeneous with nanovoids or other lower density regions forming in a dense amorphous network. A review of literature data shows that this atomic density dependence is not unique to $a$-Si. These findings suggest that TLS are not intrinsic to an amorphous network but require a heterogeneous structure to form.
113 - M. Molina-Ruiz 2021
Specific heat measurements of hydrogenated amorphous silicon prepared by hot-wire chemical vapor deposition show a large density of two-level systems at low temperature. Annealing at 200 {deg}C, well below the growth temperature, does not significant ly affect the already-low internal friction or the sound velocity, but irreversibly reduces the non-Debye specific heat by an order of magnitude at 2 K, indicating a large reduction of the density of two-level systems. Comparison of the specific heat to the internal friction suggests that the two-level systems are uncharacteristically decoupled from acoustic waves, both before and after annealing. Analysis yields an anomalously low value of the coupling constant, which increases upon annealing but still remains anomalously low. The results suggest that the coupling constant value is lowered by the presence of hydrogen.
Helical amorphous nanosprings have attracted particular interest due to their special mechanical properties. In this work we present a simple model, within the framework of the Kirchhoff rod model, for investigating the structural properties of nanos prings having asymmetric cross section. We have derived expressions that can be used to obtain the Youngs modulus and Poissons ratio of the nanospring material composite. We also address the importance of the presence of a catalyst in the growth process of amorphous nanosprings in terms of the stability of helical rods.
We study the structural origin of the Bauschinger effect by accessing numerically the local plastic thresholds in the steady state flow of a two-dimensional model glass under athermal quasistatic deformation. More specifically, we compute the local r esidual strength, $Deltatau^{c}$, for arbitrary loading orientations and find that plastic deformation generically induces material polarization, i.e., a forward-backward asymmetry in the $Deltatau^{c}$ distribution. In steady plastic flow, local packings are on average closer to forward (rather than backward) instabilities, due to the stress-induced bias of barriers. However, presumably due to mechanical noise, a significant fraction of zones lie close to reverse (backward) yielding, as the distribution of $Deltatau^{c}$ for reverse shearing extends quasilinearly down to zero local residual strength. By constructing an elementary model of the early plastic response, we then show that unloading causes reverse plasticity of a growing amplitude, i.e., reverse softening, while it shifts away forward-yielding barriers. This result in an inversion of polarization in the low-$Deltatau^{c}$ region and, consequently, in the Bauschinger effect. This scenario is quite generic, which explains the pervasiveness of the effect.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا