اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThe large magnetocaloric effect and refrigerant capacity in nanocrystalline/ amorphous Gd$_3$Ni/Gd$_{65}$Ni$_{35}$ composite microwires
144
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We report on a novel class of nanocrystalline/amorphous Gd$_3$Ni/Gd$_{65}$Ni$_{35}$ composite microwires, which was created directly by melt-extraction through controlled solidification. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the formation of a biphase nanocrystalline/amorphous structure in these wires. Magnetic and magnetocaloric experiments indicate the large magnetic entropy change (-$Delta$SM ~9.64 J/kg K) and the large refrigerant capacity (RC ~742.1 J/kg) around the Curie temperature of ~120 K for a field change of 5 T. These values are ~1.5 times larger relative to its bulk counterpart, and are superior to other candidate materials being considered for active magnetic refrigeration in the liquid nitrogen temperature range.
قيم البحث
اقرأ أيضاً
An approach to adjusting the conduction band population for tuning the magnetic and magnetocaloric response of EuO1-{delta} thin films through control of oxygen vacancies ({delta} = 0, 0.025, and 0.09) is presented. The films each showed a paramagnet
ic to ferromagnetic transition around 65 K, with an additional magnetic ordering transition at higher temperatures in the oxygen deficient samples. All transitions are observed to be of second order. A maximum magnetic entropy change of 6.4 J/kg K over a field change of 2 T with a refrigerant capacity of 223 J/kg was found in the sample with {delta} = 0, and in all cases the refrigerant capacities of the thin films under study were found to exceed that reported for bulk EuO. Adjusting the oxygen content was shown to produce table-like magnetocaloric effects, desirable for ideal Ericsson-cycle magnetic refrigeration. These films are thus excellent candidates for small-scale magnetic cooling technology in the liquid nitrogen temperature range.
Applying a magnetic field to a ferromagnetic Ni$_{50}$Mn$_{34}$In$_{16}$ alloy in the martensitic state induces a structural phase transition to the austenitic state. This is accompanied by a strain which recovers on removing the magnetic field givin
g the system a magnetically superelastic character. A further property of this alloy is that it also shows the inverse magnetocaloric effect. The magnetic superelasticity and the inverse magnetocaloric effect in Ni-Mn-In and their association with the first order structural transition is studied by magnetization, strain, and neutron diffraction studies under magnetic field.
The magnetocaloric effect (MCE) in paramagnetic materials has been widely used for attaining very low temperatures by applying a magnetic field isothermally and removing it adiabatically. The effect can be exploited also for room temperature refriger
ation by using recently discovered giant MCE materials. In this letter, we report on an inverse situation in Ni-Mn-Sn alloys, whereby applying a magnetic field adiabatically, rather than removing it, causes the sample to cool. This has been known to occur in some intermetallic compounds, for which a moderate entropy increase can be induced when a field is applied, thus giving rise to an inverse magnetocaloric effect. However, the entropy change found for some ferromagnetic Ni-Mn-Sn alloys is just as large as that reported for giant MCE materials, but with opposite sign. The giant inverse MCE has its origin in a martensitic phase transformation that modifies the magnetic exchange interactions due to the change in the lattice parameters.
In an effort to understand the impact of nanostructuring on the magnetocaloric effect, we have grown and studied gadolinium in MgO/W(50 $textrm{AA}$)/[Gd(400 $textrm{AA}$)/W(50 $textrm{AA}$)]$_8$ heterostructures. The entropy change associated with t
he second order magnetic phase transition was determined from the isothermal magnetization for numerous temperatures and the appropriate Maxwell relation. The entropy change peaks at a temperature of 284 K with a value of approximately 3.4 J/kg-K for a 0-30 kOe field change; the full width at half max of the entropy change peak is about 70 K, which is significantly wider than that of bulk Gd under similar conditions. The relative cooling power of this nanoscale system is about 240 J/kg, somewhat lower than that of bulk Gd (410 J/kg). An iterative Kovel-Fisher method was used to determine the critical exponents governing the phase transition to be $beta=0.51$, and $gamma=1.75$. Along with a suppressed Curie temperature relative to the bulk, the fact that the convergent value of $gamma$ is that predicted by the 2-D Ising model may suggest that finite size effects play an important role in this system. Together, these observations suggest that nanostructuring may be a promising route to tailoring the magnetocaloric response of materials.
We have studied the magnetocaloric effect (MCE) in the shape-memory Heusler alloy Ni$_{50}$Mn$_{35}$In$_{15}$ by direct measurements in pulsed magnetic fields up to 6 and 20 T. The results in 6 T are compared with data obtained from heat-capacity exp
eriments. We find a saturation of the inverse MCE, related to the first-order martensitic transition, with a maximum adiabatic temperature change of $Delta T_{ad} = -7$ K at 250 K and a conventional field-dependent MCE near the second-order ferromagnetic transition in the austenitic phase. The pulsed magnetic field data allow for an analysis of the temperature response of the sample to the magnetic field on a time scale of $sim 10$ to 100 ms which is on the order of typical operation frequencies (10 to 100 Hz) of magnetocaloric cooling devices. Our results disclose that in shape-memory alloys the different contributions to the MCE and hysteresis effects around the martensitic transition have to be carefully considered for future cooling applications.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
