اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدEnhancement in Power Conversion Efficiency of CdS Quantum Dot Sensitized Solar Cells Through a Decrease in Light Reflection
98
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this research, the effect of Magnesium Fluoride (MgF2) Anti-Reflection (AR) layer was investigated in quantum dot sensitized solar cells (QDSCs). MgF2 nanoparticles with the dominant size of 20 nm were grown by a thermal evaporation method and a thin layer was formed on the front side of the fluorine-doped tin oxide (FTO) substrate. In order to study the effect of the AR layer on the efficiency of solar cells, this substrate was utilized in CdS QDSCs. In this conventional structure of QDSC, TiO2 nanocrystals (NCs) were applied on the FTO substrate, and then it was sensitized with CdS quantum dots (QDs). According to the results, the QDSCs with MgF2 AR layer represented the maximum Power Conversion Efficiency (PCE) of 3%. This efficiency was increased by about 47% compared to the reference cell without the AR layer. The reason is attributed to the presence of the AR layer and the reduction of incident light reflected from the surface of the solar cell.
قيم البحث
اقرأ أيضاً
We study within the many-body Greens function $GW$ and Bethe-Salpeter formalisms the excitation energies of several coumarin dyes proposed as an efficient alternative to ruthenium complexes for dye-sensitized solar cells. Due to their internal donor-
acceptor structure, these chromophores present low-lying excitations showing a strong intramolecular charge-transfer character. We show that combining $GW$ and Bethe-Salpeter calculations leads to charge-transfer excitation energies and oscillator strengths in excellent agreement with reference range-separated functional studies or coupled-cluster calculations. The present results confirm the ability of this family of approaches to describe accurately Frenkel and charge-transfer photo-excitations in both extended and finite size systems without any system-dependent adjustable parameter, paving the way to the study of dye-sensitized semiconducting surfaces.
Here we use time-resolved and steady-state optical spectroscopy on state-of-the-art low- and high-bandgap perovskite films for tandems to quantify intrinsic recombination rates and absorption coefficients. We apply these data to calculate the limitin
g efficiency of perovskite-silicon and all-perovskite two-terminal tandems employing currently available bandgap materials as 42.0 % and 40.8 % respectively. By including luminescence coupling between sub-cells, i.e. the re-emission of photons from the high-bandgap sub-cell and their absorption in the low-bandgap sub-cell, we reveal the stringent need for current matching is relaxed when the high-bandgap sub-cell is a luminescent perovskite compared to calculations that do not consider luminescence coupling. We show luminescence coupling becomes important in all-perovskite tandems when charge carrier trapping rates are < 10$^{6}$ s$^{-1}$ (corresponding to carrier lifetimes longer than 1 ${mu}$s at low excitation densities) in the high-bandgap sub-cell, which is lowered to 10$^{5}$ s$^{-1}$ in the better-bandgap-matched perovskite-silicon cells. We demonstrate luminescence coupling endows greater flexibility in both sub-cell thicknesses, increased tolerance to different spectral conditions and a reduction in the total thickness of light absorbing layers. To maximally exploit luminescence coupling we reveal a key design rule for luminescent perovskite-based tandems: the high-bandgap sub-cell should always have the higher short-circuit current. Importantly, this can be achieved by reducing the bandgap or increasing the thickness in the high-bandgap sub-cell with minimal reduction in efficiency, thus allowing for wider, unstable bandgap compositions (>1.7 eV) to be avoided. Finally, we experimentally visualise luminescence coupling in an all-perovskite tandem device stack through cross-section luminescence images.
We investigate physics based design of colloidal quantum dot (CQD) solar cells using self-consistent computational modeling. The significance of band alignment engineering and optimized carrier mobility are quantitatively explored as a function of su
b bandgap defect densities (N_t) in the bulk CQD. For $N_t leq 10^{15} cm^{-3}$, band alignment engineering near the interface of CQD and the metal contact could significantly improve open circuit voltage by suppressing the forward bias dark current. This effect could enhance cell efficiency up to ~37% for thinner $(< 1 mu m)$ CQD layers. For thicker $(> 1 mu m)$ CQD layer, the effect of band engineering is diminished as the forward bias dark current becomes diffusion-limited and less dependent on the interfacial band offsets. An optimal carrier mobility in CQD lies in the range ~ 10^{-2} cm^2/Vs - 10^0 cm^2/Vs and shows variation as a function of CQD layer thickness and the interfacial band offset. For $N_t approx 10^{14} cm^{-3}$, an optimally designed cell could provide ~20% efficiency under AM1.5G solar spectrum without employing advanced structural optimizations such as the nanostructured electrodes. These physical insights contribute to a better understanding of quantum dot solar cell design, allowing a step further towards a highly efficient and a low cost solar cell technology.
In kesterite CZTSSe solar cell research, an asymmetric crystallization profile is often obtained after annealing, resulting in a bilayered or double-layered absorber. So far, only segregated pieces of research exist to characterize this double layer,
its formation dynamics and its effect on the performance of devices. Here, we review the existing research on double-layered kesterites and evaluate the different mechanisms proposed. Using a cosputtering-based approach, we show that the two layers can differ significantly in morphology, composition and optoelectronic properties, and complement the results with a statistical dataset of over 850 individual CZTS solar cells. By reducing the absorber thickness from above 1000 nm to 300 nm, we show that the double layer segregation is alleviated. In turn, we see a progressive improvement in the device performance for lower thickness, which alone would be inconsistent with the known case of ultrathin CIGS solar cells. By comparing the results with CZTS grown on monocrystalline Si substrates, without a native Na supply, we show that the alkali metal supply does not determine the double layer formation, but merely reduces the threshold for its occurrence. Instead, we propose that the main formation mechanism is the early migration of Cu to the surface during annealing and formation of Cu2-xS phases, in a self-regulating process akin to the Kirkendall effect. We comment on the generality of the mechanism proposed, comparing our results to other synthesis routes, including our own in-house results from solution processing and pulsed laser deposition of sulfide and oxide-based targets. Although the double layer occurrence largely depends on the kesterite synthesis route, the common factors determining the double layer occurrence appear to be the presence of metallic Cu and/or a chalcogen deficiency in the precursor matrix.
Organic molecular hole-transport materials (HTMs) are appealing for the scalable manufacture of perovskite solar cells (PSCs) because they are easier to reproducibly prepare in high purity than polymeric and inorganic HTMs. There is also a need to co
nstruct PSCs without dopants and additives to avoid formidable engineering and stability issues. We report here a power conversion efficiency (PCE) of 20.6% with a molecular HTM in an inverted (p-i-n) PSC without any dopants or interlayers. This new benchmark was made possible by the discovery that annealing a spiro-based dopant-free HTM (denoted DFH) containing redox-active triphenyl amine (TPA) units undergoes preferential molecular organization normal to the substrate. This structural order, governed by the strong intermolecular interactions of the DFH dioxane groups, affords high intrinsic hole mobility (1x10-3 cm2 V-1 s-1). Annealing films of DFH also enables the growth of large perovskite grains (up to 2 um) that minimize charge recombination in the PSC. DFH can also be isolated at a fraction of the cost of any other organic HTM.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
