ترغب بنشر مسار تعليمي؟ اضغط هنا

Gain-through-filtering enables tuneable frequency comb generation in passive optical resonators

128   0   0.0 ( 0 )
 نشر من قبل Matteo Conforti
 تاريخ النشر 2019
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Optical frequency combs (OFCs), consisting of a set of phase locked equally spaced laser frequency lines, have enabled a great leap in precision spectroscopy and metrology since seminal works of Hansch et al. . Nowadays, OFCs are cornerstones of a wealth of further applications ranging from chemistry and biology to astrophysics and including molecular fingerprinting and LIDARs among others. Driven passive optical resonators constitute the ideal platform for OFCs generation in terms of compactness and low energy footprint. We propose here a new technique for generation of OFCs with tuneable repetition rate in externally driven optical resonators based on the gain-through-filtering process, a simple and elegant method, due to an asymmetric spectral filtering on one side of the pump wave. We demonstrate a proof-of-concept experimental result in a fibre resonator, pioneering a new technique that does not require specific engineering of the resonator dispersion to generate frequency agile OFCs.

قيم البحث

اقرأ أيضاً

We study the properties of a soliton crystal, an bound state of several optical pulses that propagate with a fixed temporal separation through the optical fibres of the proposed approach for generation of optical frequency combs (OFC) for astronomica l spectrograph calibration. This approach - also being suitable for subpicosecond pulse generation for other applications - consists of a conventional single-mode fibre and a suitably pumped Erbium-doped fibre. Two continuous-wave lasers are used as light source. The soliton crystal arises out of the initial deeply modulated laser field at low input powers; for higher input powers, it dissolves into free solitons. We study the soliton crystal build-up in the first fibre stage with respect to different fibre parameters (group-velocity dispersion, nonlinearity, and optical losses) and to the light source characteristics (laser frequency separation and intensity difference). We show that the soliton crystal can be described by two quantities, its fundamental frequency and the laser power-threshold at which the crystal dissolves into free solitons. The soliton crystal exhibits features of a linear and nonlinear optical pattern at the same time and is insensitive to the initial laser power fluctuations. We perform our studies using the numerical technique called Soliton Radiation Beat Analysis.
We have generated frequency combs spanning 0.5 to 20 GHz in superconducting half wave resonators at T=3 K. Thin films of niobium-titanium nitride enabled this development due to their low loss, high nonlinearity, low frequency dispersion, and high cr itical temperature. The combs nucleate as sidebands around multiples of the pump frequency. Selection rules for the allowed frequency emission are calculated using perturbation theory and the measured spectrum is shown to agree with the theory. The sideband spacing is measured to be accurate to 1 part in 10 million. The sidebands coalesce into a continuous comb structure that has been observed to cover at least 6 octaves in frequency.
An optical frequency comb consists of a set of discrete and equally spaced frequencies and has found wide applications in the synthesis over broad spectral frequencies of electromagnetic wave and precise optical frequency metrology. Despite the analo gies between magnons and photons in many aspects, the analogue of optical frequency comb in magnonic system has not been reported. Here, we theoretically study the magnon-skyrmion interaction and find that magnonic frequency comb (MFC) can be generated above a threshold of driving amplitude, where the nonlinear scattering process involving three magnons prevails. The mode-spacing of the MFC is equal to the breathing-mode frequency of skyrmion and is thus tunable by either electric or magnetic means. The theoretical prediction is verified by micromagnetic simulations and the essential physics can be generalized to a large class of magnetic solitons. Our findings open a new pathway to observe the frequency comb structure in magnonic devices, that may inspire the study of fundamental nonlinear physics in spintronic platform in the future.
Microresonator Kerr frequency combs, which rely on third-order nonlinearity ($chi^{(3)}$), are of great interest for a wide range of applications including optical clocks, pulse shaping, spectroscopy, telecommunications, light detection and ranging ( LiDAR) and quantum information processing. Many of these applications require further spectral and temporal control of the generated frequency comb signal, which is typically accomplished using additional photonic elements with strong second-order nonlinearity ($chi^{(2)}$). To date these functionalities have largely been implemented as discrete off-chip components due to material limitations, which come at the expense of extra system complexity and increased optical losses. Here we demonstrate the generation, filtering and electro-optic modulation of a frequency comb on a single monolithic integrated chip, using a thin-film lithium niobate (LN) photonic platform that simultaneously possesses large $chi^{(2)}$ and $chi^{(3)}$ nonlinearities and low optical losses. We generate broadband Kerr frequency combs using a dispersion-engineered high quality factor LN microresonator, select a single comb line using an electrically programmable add-drop filter, and modulate the intensity of the selected line. Our results pave the way towards monolithic integrated frequency comb solutions for spectroscopy data communication, ranging and quantum photonics.
There are several mechanisms by which the frequency spectrum of a laser broadens when it propagates at near-relativistic-intensity in tenuous plasma. Focusing on one dimensional effects, we identify two strong optical nonlinearities, namely, four-wav e mixing (FWM) and forward Raman scattering (FRS), for creating octave-wide spectra. FWM dominates the interaction when the laser pulse is short and intense; Its combination with phase modulation produces a symmetrically broadened supercontinuum. FRS dominates when the laser pulse is long and relatively weak; It broadens the laser spectrum mainly towards lower frequencies and produces a frequency comb. The creation of the supercontinuum and frequency combs only frequency modulates, but does not compress, the laser pulse.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا