اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدFast Reflective Optic-Based Rotational Anisotropy Nonlinear Harmonic Generation Spectrometer
299
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We present a novel Rotational Anisotropy Nonlinear Harmonic Generation (RA-NHG) apparatus based primarily upon reflective optics. The data acquisition scheme used here allows for fast accumulation of RA-NHG traces, mitigating low frequency noise from laser drift, while permitting real-time adjustment of acquired signals with significantly more data points per unit angle rotation of the optics than other RA-NHG setups. We discuss the design and construction of the optical and electronic components of the device and present example data taken on a GaAs test sample at a variety of wavelengths. The RA-second harmonic generation data for this sample show the expected four-fold rotational symmetry across a broad range of wavelengths, while those for RA-third harmonic generation exhibit evidence of cascaded nonlinear processes possible in acentric crystal structures.
قيم البحث
اقرأ أيضاً
We describe a novel scheme of detecting rotational anisotropy second harmonic generation (RA-SHG) signals using a lock-in amplifier referenced to a fast scanning RA-SHG apparatus. The method directly measures the $n^{th}$ harmonics of the scanning fr
equency corresponding to SHG signal components of $C_n$ symmetry that appear in a Fourier series expansion of a general RA-SHG signal. GaAs was used as a test sample allowing comparison of point-by-point averaging with the lock-in based method. When divided by the $C_infty$ signal component, the lock-in detected data allowed for both self-referenced determination of ratios of $C_n$ components of up to 1 part in 10$^4$ and significantly more sensitive measurement of the relative amount of different $C_n$ components when compared with conventional methods.
A periodically poled lithium niobate (PPLN) waveguide-based single-pixel up-conversion infrared spectrometer was demonstrated. Sum-frequency generation between a 1.5 micrometer band scanning pump laser and a 1.3 micrometer band signal generated visib
le radiation which was detected by a silicon single-photon detector. The noise equivalent power of the upconversion spectrometer was two-orders-of-magnitude lower than that of a commercial optical spectrum analyzer.
We build a resonant fiber optic gyro based on Kagome hollow-core fiber. A semi-bulk cavity architecture based on a 18-m-long Kagome fiber permits to achieve a cavity finesse of 23 with a resonance linewidth of 700 kHz. An optimized Pound-Drever-Hall
servo-locking scheme is used to probe the cavity in reflection. Closed-loop operation of the gyroscope permits to reach an angular random walk as small as 0.004$^circ/sqrt{mathrm{h}}$ and a bias stability of 0.45$^circ$/h over 0.5 s of integration time.
In this paper we describe the development and first tests of a neutron spectrometer designed for high flux environments, such as the ones found in fast nuclear reactors. The spectrometer is based on the conversion of neutrons impinging on $^6$Li into
$alpha$ and $t$ whose total energy comprises the initial neutron energy and the reaction $Q$-value. The $^6$LiF layer is sandwiched between two CVD diamond detectors, which measure the two reaction products in coincidence. The spectrometer was calibrated at two neutron energies in well known thermal and 3 MeV neutron fluxes. The measured neutron detection efficiency varies from 4.2$times 10^{-4}$ to 3.5$times 10^{-8}$ for thermal and 3 MeV neutrons, respectively. These values are in agreement with Geant4 simulations and close to simple estimates based on the knowledge of the $^6$Li(n,$alpha$)$t$ cross section. The energy resolution of the spectrometer was found to be better than 100 keV when using 5 m cables between the detector and the preamplifiers.
A general-purpose all-fiber spectrometer is demonstrated to overcome the trade-off between spectral resolution and bandwidth. By integrating a wavelength division multiplexer with five multimode optical fibers, we have achieved 100 nm bandwidth with
0.03 nm resolution at wavelength 1500 nm. An efficient algorithm is developed to reconstruct the spectrum from the speckle pattern produced by interference of guided modes in the multimode fibers. Such algorithm enables a rapid, accurate reconstruction of both sparse and dense spectra in the presence of noise.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
