اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHigher dispersion and efficiency Bragg gratings for optical spectroscopy
73
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Massively multiplexed spectroscopic stellar surveys such as MSE present enormous challenges in the spectrograph design. The combination of high multiplex, large telescope aperture, high resolution (R~40,000) and natural seeing implies that multiple spectrographs with large beam sizes, large grating angles, and fast camera speeds are required, with high cost and risk. An attractive option to reduce the beam size is to use Bragg-type gratings at much higher angles than hitherto considered. As well as reducing the spectrograph size and cost, this also allows the possibility of very high efficiency due to a close match of s and p-polarization Bragg efficiency peaks. The grating itself could be a VPH grating, but Surface Relief (SR) gratings offer an increasingly attractive alternative, with higher maximum line density and better bandwidth. In either case, the grating needs to be immersed within large prisms to get the light to and from the grating at the required angles. We present grating designs and nominal spectrograph designs showing the efficiency gains and size reductions such gratings might allow for the MSE high resolution spectrograph.
قيم البحث
اقرأ أيضاً
Periodic structures resonantly coupled to excitonic media allow the existence of extra intragap modes (Braggoritons), due to the coupling between Bragg photon modes and 3D bulk excitons. This induces unique and unexplored dispersive features, which c
an be tailored by properly designing the photonic bandgap around the exciton resonance. We report that one-dimensional Braggoritons realized with semiconductor gratings have the ability to mimic the dispersion of quantum-well microcavity polaritons. This will allow the observation of new nonlinear phenomena, such as slow-light-enhanced nonlinear propagation and an efficient parametric scattering at two magic frequencies.
GNOSIS is a prototype astrophotonic instrument that utilizes OH suppression fibres consisting of fibre Bragg gratings and photonic lanterns to suppress the 103 brightest atmospheric emission doublets between 1.47-1.7 microns. GNOSIS was commissioned
at the 3.9-meter Anglo-Australian Telescope with the IRIS2 spectrograph to demonstrate the potential of OH suppression fibres, but may be potentially used with any telescope and spectrograph combination. Unlike previous atmospheric suppression techniques GNOSIS suppresses the lines before dispersion and in a manner that depends purely on wavelength. We present the instrument design and report the results of laboratory and on-sky tests from commissioning. While these tests demonstrated high throughput and excellent suppression of the skylines by the OH suppression fibres, surprisingly GNOSIS produced no significant reduction in the interline background and the sensitivity of GNOSIS and IRIS2 is about the same as IRIS2. It is unclear whether the lack of reduction in the interline background is due to physical sources or systematic errors as the observations are detector noise-dominated. OH suppression fibres could potentially impact ground-based astronomy at the level of adaptive optics or greater. However, until a clear reduction in the interline background and the corresponding increasing in sensitivity is demonstrated optimized OH suppression fibres paired with a fibre-fed spectrograph will at least provide a real benefits at low resolving powers.
We report on the optical characterization of an ultra-high diffraction efficiency grating in 1st order Littrow configuration. The apparatus used was an optical cavity built from the grating under investigation and an additional high reflection mirror
. Measurement of the cavity finesse provided precise information about the gratings diffraction efficiency and its optical loss. We measured a finesse of 1580 from which we deduced a diffraction efficiency of (99.635$pm$0.016)% and an overall optical loss due to scattering and absorption of just 0.185 %. Such high quality gratings, including the tool used for their characterization, might apply for future gravitational wave detectors. For example the demonstrated cavity itself presents an all-reflective, low-loss Fabry-Perot resonator that might replace conventional arm cavities in advanced high power Michelson interferometers.
A blazed chirped Bragg grating in a planar silica waveguide device was used to create an integrated diffractive element for a spectrometer. The grating diffracts light from a waveguide and creates a wavelength dependent focus in a manner similar to a
bulk diffraction grating spectrometer. An external imaging system is used to analyse the light, later device iterations plan to integrate detectors to make a fully integrated spectrometer. Devices were fabricated with grating period chirp rates in excess of 100nm/mm, achieving a focal length of 5.5mm. Correction of coma aberrations resulted in a device with a footprint of 20mm x 10mm, a peak FWHM resolution of 1.8nm, a typical FWHM resolution of 2.6nm and operating with a 160nm bandwidth centered at 1550nm.
The recent development of the terahertz waveguide makes it an excellent platform for integrating many intriguing functionalities, which offers tremendous potential to build compact and robust terahertz systems. In the context of next-generation high-
speed communication links at the terahertz band, engineering the dispersion and birefringence of terahertz waves is essential. Here, we experimentally demonstrate subwavelength birefringent waveguide gratings based on the low-loss cyclic olefin copolymer exploiting micro-machining fabrication techniques. Asymmetric cross-section and periodic-structural modulation along propagation direction are introduced to achieve birefringent THz grating for filtering and dispersion compensation. Because of strong index modulation in the subwavelength fiber, a high negative group velocity dispersion of -188 (-88) ps/mm/THz is achieved at 0.15 THz for x-polarization (y-polarization), i.e., 7.5 times increase compared to the state-of-the-art reported to date. Such high negative dispersion is realized in a 43 mm grating length, which is less than half of the length reported until now (e.g., 100 mm). Further, the subwavelength fiber grating filters two orthogonal polarization states and exhibits transmission dips with 8.5-dB and 7.5-dB extinction ratios for x and y polarization, respectively. Our experiment demonstrates the feasibility of using polymer-based terahertz gratings as a dispersion compensator in terahertz communications and steering polarized terahertz radiations for polarization-sensitive THz systems.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
