ترغب بنشر مسار تعليمي؟ اضغط هنا

Fast multicolor photodetectors based on graphene-contacted p-GaSe/n-InSe van der Waals heterostructures

103   0   0.0 ( 0 )
 نشر من قبل Faguang Yan
 تاريخ النشر 2017
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The integration of different two-dimensional materials within a multilayer van der Waals (vdW) heterostructure offers a promising technology for realizing high performance opto-electronic devices such as photodetectors and light sources1-3. Transition metal dichalcogenides, e.g. MoS2 and WSe2, have been employed as the optically-active layer in recently developed heterojunctions. However, MoS2 and WSe2 become direct band gap semiconductors only in mono- or bilayer form4,5. In contrast, the metal monochalcogenides InSe and GaSe retain a direct bandgap over a wide range of layer thicknesses from bulk crystals down to exfoliated flakes only a few atomic monolayers thick6,7. Here we report on vdW heterojunction diodes based on InSe and GaSe: the type II band alignment between the two materials and their distinctive spectral response, combined with the low electrical resistance of transparent graphene electrodes, enable effective separation and extraction of photoexcited carriers from the heterostructure even when no external voltage is applied. Our devices are fast (< 10 {mu}s), self-driven photodetectors with multicolor photoresponse ranging from the ultraviolet to the near-infrared and have the potential to accelerate the exploitation of two-dimensional vdW crystals by creating new routes to miniaturized optoelectronics beyond present technologies.



قيم البحث

اقرأ أيضاً

Two-dimensional semiconductors are excellent candidates for next-generation electronics and optoelec-tronics thanks to their electrical properties and strong light-matter interaction. To fabricate devices with optimal electrical properties, it is cru cial to have both high-quality semiconducting crystals and ideal con-tacts at metal-semiconductor interfaces. Thanks to the mechanical exfoliation of van der Waals crystals, atomically-thin high-quality single-crystals can easily be obtained in a laboratory. However, conventional metal deposition techniques can introduce chemical disorder and metal-induced mid-gap states that induce Fermi level pinning and can degrade the metal-semiconductor interfaces, resulting in poorly performing devices. In this article, we explore the electrical contact characteristics of Au-InSe and graphite-InSe van der Waals contacts, obtained by stacking mechanically exfoliated InSe flakes onto pre-patterned Au or graphite electrodes without the need of lithography or metal deposition. The high quality of the metal-semiconductor interfaces obtained by van der Waals contact allows to fabricate high-quality Schottky di-odes based on the Au-InSe Schottky barrier. Our experimental observation indicates that the contact barrier at the graphite-InSe interface is negligible due to the similar electron affinity of InSe and graphite, while the Au-InSe interfaces are dominated by a large Schottky barrier.
Vertically stacking two dimensional (2D) materials can enable the design of novel electronic and optoelectronic devices and realize complex functionality. However, the fabrication of such artificial heterostructures in wafer scale with an atomically- sharp interface poses an unprecedented challenge. Here, we demonstrate a convenient and controllable approach for the production of wafer-scale 2D GaSe thin films by molecular beam epitaxy. In-situ reflection high-energy electron diffraction oscillations and Raman spectroscopy reveal a layer-by-layer van der Waals epitaxial growth mode. Highly-efficient photodetector arrays were fabricated based on few-layer GaSe on Si. These photodiodes show steady rectifying characteristics and a relatively high external quantum efficiency of 23.6%. The resultant photoresponse is super-fast and robust with a response time of 60 us. Importantly, the device shows no sign of degradation after 1 million cycles of operation. Our study establishes a new approach to produce controllable, robust and large-area 2D heterostructures and presents a crucial step for further practical applications.
89 - V. Ryzhii , M. Ryzhii , V. Leiman 2017
We study the operation of infrared photodetectors based on van der Waals heterostructures with the multiple graphene layers (GLs) and n-type emitter and collector contacts. The operation of such GL infrared photodetectors (GLIPs) is associated with t he photoassisted escape of electrons from the GLs into the continuum states in the conduction band of the barrier layers due to the interband photon absorption, the propagation of these electrons and the electrons injected from the emitter across the heterostructure and their collection by the collector contact. The space charge of the holes trapped in the GLs provides a relatively strong injection and large photoelectric gain. We calculate the GLIP responsivity and dark current detectivity as functions of the energy of incident infrared photons and the structural parameters. It is shown that both the periodic selective doping of the inter-GL barrier layers and the GL doping lead to a pronounced variation of the GLIP spectral characteristics, particularly near the interband absorption threshold, while the doping of GLs solely results in a substantial increase in the GLIP detectivity. The doping engineering opens wide opportunities for the optimization of GLIPs for operation in different parts of radiation spectrum from near infrared to terahertz.
Graphene constitutes one of the key elements in many functional van der Waals heterostructures. However, it has negligible optical visibility due to its monolayer nature. Here we study the visibility of graphene in various van der Waals heterostructu res and include the effects of the source spectrum, oblique incidence and the spectral sensitivity of the detector to obtain a realistic model. A visibility experiment is performed at different wavelengths, resulting in a very good agreement with our calculations. This allows us to reliably predict the conditions for better visibility of graphene in van der Waals heterostructures. The framework and the codes provided in this work can be extended to study the visibility of any 2D material within an arbitrary van der Waals heterostructure.
Two dimensional materials are usually envisioned as flat, truly 2D layers. However out-of-plane corrugations are inevitably present in these materials. In this manuscript, we show that graphene flakes encapsulated between insulating crystals (hBN, WS e2), although having large mobilities, surprisingly contain out-of-plane corrugations. The height fluctuations of these corrugations are revealed using weak localization measurements in the presence of a static in-plane magnetic field. Due to the random out-of-plane corrugations, the in-plane magnetic field results in a random out-of-plane component to the local graphene plane, which leads to a substantial decrease of the phase coherence time. Atomic force microscope measurements also confirm a long range height modulation present in these crystals. Our results suggest that phase coherent transport experiments relying on purely in-plane magnetic fields in van der Waals heterostructures have to be taken with serious care.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا