اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدIso-oriented monolayer {alpha}-MoO3(010) films epitaxially grown on SrTiO3(001)
87
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The ability to synthesis well-ordered two-dimensional materials under ultra-high vacuum and directly characterize them by other techniques in-situ can greatly advance our current understanding on their physical and chemical properties. In this paper, we demonstrate that iso-oriented {alpha}-MoO3 films with as low as single monolayer thickness can be reproducibly grown on SrTiO3(001) (STO) substrates by molecular beam epitaxy ( (010)MoO3 || (001)STO, [100]MoO3 || [100]STO or [010]STO) through a self-limiting process. While one in-plane lattice parameter of the MoO3 is very close to that of the SrTiO3 (aMoO3 = 3.96 {AA}, aSTO = 3.905 {AA}), the lattice mismatch along other direction is large (~5%, cMoO3 = 3.70 {AA}), which leads to relaxation as clearly observed from the splitting of streaks in reflection high-energy electron diffraction (RHEED) patterns. A narrow range in the growth temperature is found to be optimal for the growth of monolayer {alpha}-MoO3 films. Increasing deposition time will not lead to further increase in thickness, which is explained by a balance between deposition and thermal desorption due to the weak van der Waals force between {alpha}-MoO3 layers. Lowering growth temperature after the initial iso-oriented {alpha}-MoO3 monolayer leads to thicker {alpha}-MoO3(010) films with excellent crystallinity.
قيم البحث
اقرأ أيضاً
Two-dimensional (2D) ferromagnetic materials have been exhibiting promising potential in applications, such as spintronics devices. To grow epitaxial magnetic films on silicon substrate, in the single-layer limit, is practically important but challen
ging. In this study, we realized the epitaxial growth of MnSn monolayer on Si(111) substrate, with an atomically thin Sn/Si(111)-$2sqrt{3}times2sqrt{3}$- buffer layer, and controlled the MnSn thickness with atomic-layer precision. We discovered the ferromagnetism in MnSn monolayer with the Curie temperature (Tc) of ~54 K. As the MnSn film is grown to 4 monolayers, Tc increases accordingly to ~235 K. The lattice of the epitaxial MnSn monolayer as well as the Sn/Si(111)-$2sqrt{3}times2sqrt{3}$ is perfectly compatible with silicon, and thus an sharp interface is formed between MnSn, Sn and Si. This system provides a new platform for exploring the 2D ferromagnetism, integrating magnetic monolayers into silicon-based technology, and engineering the spintronics heterostructures.
The strong light-matter interaction in transition Metal dichalcogenides (TMDs) monolayers (MLs) is governed by robust excitons. Important progress has been made to control the dielectric environment surrounding the MLs, especially through hexagonal b
oron nitride (hBN) encapsulation, which drastically reduces the inhomogeneous contribution to the exciton linewidth. Most studies use exfoliated hBN from high quality flakes grown under high pressure. In this work, we show that hBN grown by molecular beam epitaxy (MBE) over a large surface area substrate has a similarly positive impact on the optical emission from TMD MLs. We deposit MoS$_2$ and MoSe$_2$ MLs on ultrathin hBN films (few MLs thick) grown on Ni/MgO(111) by MBE. Then we cover them with exfoliated hBN to finally obtain an encapsulated sample : exfoliated hBN/TMD ML/MBE hBN. We observe an improved optical quality of our samples compared to TMD MLs exfoliated directly on SiO$_2$ substrates. Our results suggest that hBN grown by MBE could be used as a flat and charge free substrate for fabricating TMD-based heterostructures on a larger scale.
We demonstrate single crystal growth of wafer-scale hexagonal boron nitride (hBN), an insulating atomic thin monolayer, on high-symmetry index surface plane Cu(111). The unidirectional epitaxial growth is guaranteed by large binding energy difference
, ~0.23 eV, between A- and B-steps edges on Cu(111) docking with B6N7 clusters, confirmed by density functional theory calculations.
Crystalline Fe3O4/NiO bilayers were grown on MgO(001) substrates using reactive molecular beam epitaxy to investigate their structural properties and their morphology. The film thickness either of the Fe3O4 film or of the NiO film has been varied to
shed light on the relaxation of the bilayer system. The surface properties as studied by x-ray photo electron spectroscopy and low energy electron diffraction show clear evidence of stoichiometric well-ordered film surfaces. Based on the kinematic approach x-ray diffraction experiments were completely analyzed. As a result the NiO films grow pseudomorphic in the investigated thickness range (up to 34nm) while the Fe3O4 films relax continuously up to the thickness of 50nm. Although all diffraction data show well developed Laue fringes pointing to oxide films of very homogeneous thickness, the Fe3O4-NiO interface roughens continuously up to 1nm root-mean-square roughness with increasing NiO film thickness while the Fe3O4 surface is very smooth independent on the Fe3O4 film thickness. Finally, the Fe3O4-NiO interface spacing is similar to the interlayer spacing of the oxide films while the NiO-MgO interface is expanded.
We report on a systematic comparative study of the spin Hall efficiency between highly face-centered cubic (fcc)-textured Pt-Al alloy films grown on MgO(001) and poorly-crystallized Pt-Al alloy films grown on SiO$_2$. Using CoFeB as the detector, we
show that for Al compositions centering around $x = 25$, mainly L1$_{2}$ ordered Pt$_{100-x}$Al$_x$ alloy films grown on MgO exhibit outstanding charge-spin conversion efficiency. For Pt$_{78}$Al$_{22}$/CoFeB bilayer on MgO, we obtain damping-like spin Hall efficiency as high as $xi_textrm{DL} sim +0.20$ and expect up to seven-fold reduction of power consumption compared to the polycrystalline bilayer of the same Al composition on SiO$_2$. This work demonstrates that improving the crystallinity of fcc Pt-based alloys is a crucial step for achieving large spin Hall efficiency and low power consumption in this material class.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
