اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCan Tunnel Transistors Scale Below 10nm?
113
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The main promise of tunnel FETs (TFETs) is to enable supply voltage ($V_{DD}$) scaling in conjunction with dimension scaling of transistors to reduce power consumption. However, reducing $V_{DD}$ and channel length ($L_{ch}$) typically deteriorates the ON- and OFF-state performance of TFETs, respectively. Accordingly, there is not yet any report of a high perfor]mance TFET with both low V$_{DD}$ ($sim$0.2V) and small $L_{ch}$ ($sim$6nm). In this work, it is shown that scaling TFETs in general requires scaling down the bandgap $E_g$ and scaling up the effective mass $m^*$ for high performance. Quantitatively, a channel material with an optimized bandgap ($E_gsim1.2qV_{DD} [eV]$) and an engineered effective mass ($m*^{-1}sim40 V_{DD}^{2.5} [m_0^{-1}]$) makes both $V_{DD}$ and $L_{ch}$ scaling feasible with the scaling rule of $L_{ch}/V_{DD}=30~nm/V$ for $L_{ch}$ from 15nm to 6nm and corresponding $V_{DD}$ from 0.5V to 0.2V.
قيم البحث
اقرأ أيضاً
Tunneling field-effect transistors (TFETs) based on 2D materials are promising steep sub-threshold swing (SS) devices due to their tight gate control. There are two major methods to create the tunnel junction in these 2D TFETs: electrical and chemica
l doping. In this work, design guidelines for both electrically and chemically doped 2D TFETs are provided using full band atomistic quantum transport simulations in conjunction with analytic modeling. Moreover, several 2D TFETs performance boosters such as strain, source doping, and equivalent oxide thickness (EOT) are studied. Later on, these performance boosters are analyzed within a novel figure-of-merit plot (i.e. constant ON-current plot).
Atomically precise donor-based quantum devices are a promising candidate for scalable solid-state quantum computing. Atomically precise design and implementation of the tunnel coupling in these devices is essential to realize gate-tunable exchange co
upling, and electron spin initialization and readout. Current efforts in atomically precise lithography have enabled deterministic placement of single dopant atoms into the Si lattice with sub-nm precision. However, critical challenges in atomically precise fabrication have meant systematic, atomic-scale control of the tunneling coupling has not been demonstrated. Here using a room-temperature grown locking layer and precise control over the entire atomic-scale fabrication process, we demonstrate atomic-scale control of the tunnel coupling in atomically precise single-electron transistors (SETs). Using the naturally occurring Si (100) 2x1 surface reconstruction lattice as an atomically-precise ruler, we systematically vary the number of lattice counts within the tunnel junction gaps and demonstrate exponential scaling of the tunneling resistance at the atomic limit. Using low-temperature transport measurements, we characterize the tunnel coupling asymmetry in a pair of nominally identical tunnel gaps that results from atomic-scale variation in the tunnel junction and show a resistance difference of four that corresponds to half a dimer row pitch difference in the effective tunnel gap distances - the intrinsic limit of hydrogen lithography precision on Si (100) 2x1 surfaces. Our results demonstrate the key capability to do atom-scale design and engineering of the tunnel coupling necessary for solid-state quantum computing and analog quantum simulation.
We measure the current vs voltage (I-V) characteristics of a diodelike tunnel junction consisting of a sharp metallic tip placed at a variable distance d from a planar collector and emitting electrons via electric-field assisted emission. All curves
collapse onto one single graph when I is plotted as a function of the single scaling variable Vd^{-lambda}, d being varied from a few mm to a few nm, i.e., by about six orders of magnitude. We provide an argument that finds the exponent {lambda} within the singular behavior inherent to the electrostatics of a sharp tip. A simulation of the tunneling barrier for a realistic tip reproduces both the scaling behavior and the small but significant deviations from scaling observed experimentally.
In a continuous search for the energy-efficient electronic switches, a great attention is focused on tunnel field-effect transistors (TFETs) demonstrating an abrupt dependence of the source-drain current on the gate voltage. Among all TFETs, those ba
sed on one-dimensional (1D) semiconductors exhibit the steepest current switching due to the singular density of states near the band edges, though the current in 1D structures is pretty low. In this paper, we propose a TFET based on 2D graphene bilayer which demonstrates a record steep subthreshold slope enabled by van Hove singularities in the density of states near the edges of conduction and valence bands. Our simulations show the accessibility of 3.5 x 10$^4$ ON/OFF current ratio with 150 mV gate voltage swing, and a maximum subthreshold slope of (20 {mu}V/dec)$^{-1}$ just above the threshold. The high ON-state current of 0.8 mA/{mu}m is enabled by a narrow (~ 0.3 eV) extrinsic band gap, while the smallness of the leakage current is due to an all-electrical doping of the source and drain contacts which suppresses the band-tailing and trap-assisted tunneling.
We report the realization of top-gated graphene nanoribbon field effect transistors (GNRFETs) of ~10 nm width on large-area epitaxial graphene exhibiting the opening of a band gap of ~0.14 eV. Contrary to prior observations of disordered transport an
d severe edge-roughness effects of GNRs, the experimental results presented here clearly show that the transport mechanism in carefully fabricated GNRFETs is conventional band-transport at room temperature, and inter-band tunneling at low temperature. The entire space of temperature, size, and geometry dependent transport properties and electrostatics of the GNRFETs are explained by a conventional thermionic emission and tunneling current model. Our combined experimental and modeling work proves that carefully fabricated narrow GNRs behave as conventional semiconductors, and remain potential candidates for electronic switching devices.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
