اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدEffects of applied strain on radiation damage generation in body-centered cubic iron
200
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Radiation damage in body-centered cubic (BCC) Fe has been extensively studied by computer simulations to quantify effects of temperature, impinging particle energy, and the presence of extrinsic particles. However, limited investigation has been conducted into the effects of mechanical stresses and strain. In a reactor environment, structural materials are often mechanically strained, and an expanded understanding of how this strain affects the generation of defects may be important for predicting microstructural evolution and damage accumulation under such conditions. In this study, we have performed molecular dynamics simulations in which various types of homogeneous strains are applied to BCC Fe and the effect on defect generation is examined. It is found that volume-conserving shear strains yield no statistically significant variations in the stable number of defects created via cascades in BCC Fe. However, strains that result in volume changes are found to produce significant effects on defect generation.
قيم البحث
اقرأ أيضاً
Electronic effects are believed to be important in high--energy radiation damage processes where high electronic temperature is expected, yet their effects are not currently understood. Here, we perform molecular dynamics simulations of high-energy c
ollision cascades in $alpha$-iron using the coupled two-temperature molecular dynamics (2T-MD) model that incorporates both effects of electronic stopping and electron-ion interaction. We subsequently compare it with the model employing the electronic stopping only, and find several interesting novel insights. The 2T-MD results in both decreased damage production in the thermal spike and faster relaxation of the damage at short times. Notably, the 2T-MD model gives a similar amount of the final damage at longer times, which we interpret to be the result of two competing effects: smaller amount of short-time damage and shorter time available for damage recovery.
Molecular dynamics simulations were performed to understand the role of twin boundaries on deformation behaviour of body-centred cubic (BCC) iron (Fe) nanopillars. The twin boundaries varying from one to five providing twin boundary spacing in the ra
nge 8.5 - 2.8 nm were introduced perpendicular to the loading direction. The simulation results indicated that the twin boundaries in BCC Fe play a contrasting role during deformation under tensile and compressive loadings. During tensile deformation, a large reduction in yield stress was observed in twinned nanopillars compared to perfect nanopillar. However, the yield stress exhibited only marginal variation with respect to twin boundary spacing. On the contrary, a decrease in yield stress with increase in twin boundary spacing was obtained during compressive deformation. This contrasting behaviour originates from difference in operating mechanisms during yielding and subsequent plastic deformation. It has been observed that the deformation under tensile loading was dominated mainly by twin growth mechanism, due to which the twin boundaries offers a negligible resistance to slip of twinning partials. This is reflected in the negligible variation of yield stress as a function of twin boundary spacing. On the other hand, the deformation was dominated by nucleation and slip of full dislocations under compressive loading. The twin boundaries offer a strong repulsive force on full dislocations resulting in the yield stress dependence on twin boundary spacing. Further, it has been observed that the curved twin boundary can acts as a source for full dislocation. The occurrence of twin-twin interaction during tensile deformation and dislocation-twin interaction during compressive deformation were presented and discussed.
Irradiation-induced vacancy evolution in face-centered cubic (FCC) Ni under mechanical strains was studied using molecular dynamics simulations. Applied hydrostatic strain led to different stable forms of vacancy clusters, i.e., voids under strain >=
+2% and stacking fault tetrahedras (SFTs) under strain <= 0. Direct transitions between SFT and void revealed that increasing strain magnitude facilitated the thermodynamic stability and dynamical evolution. The estimated free energy difference could well validate the dynamical simulations results by accounting for entropic contribution, which was revealed to play an important role in the thermodynamic stability of vacancy clusters in FCC Ni.
Plastic deformations in body-centered-cubic (BCC) crystals have been of critical importance in diverse engineering and manufacturing contexts across length scales. Numerous experiments and atomistic simulations on BCC crystals reveal that classical c
rystal plasticity models with the Schmid law are not adequate to account for abnormal plastic deformations often found in these crystals. In this paper, we address a continuum mechanical treatment of anomalous plasticity in BCC crystals exhibiting non-Schmid effects, inspired from atomistic simulations recently reported. Specifically, anomalous features of plastic flows are addressed in conjunction with a single crystal constitutive model involving two non-Schmid projection tensors widely accepted for representing non-glide components of an applied stress tensor. Further, modeling results on a representative BCC single crystal (tantalum) are presented and compared to experimental data at a range of low temperatures to provide physical insight into deformation mechanisms in these crystals with non-Schmid effects.
Understanding and predicting a materials performance in response to high-energy radiation damage, as well as designing future materials to be used in intense radiation environments, requires the knowledge of the structure, morphology and amount of ra
diation-induced structural change. We report the results of molecular dynamics simulations of high-energy radiation damage in iron in the range 0.2-0.5 MeV. We analyze and quantify the nature of collision cascades both at the global and local scale. We find that the structure of high-energy collision cascades becomes increasingly continuous as opposed to showing sub-cascade branching reported previously. At the local length scale, we find large defect clusters and novel small vacancy and interstitial clusters. These features form the basis for physical models aimed at understanding the effects of high energy radiation damage in structural materials.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
