اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدChip-level and multi-node analysis of energy-optimized lattice-Boltzmann CFD simulations
325
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Memory-bound algorithms show complex performance and energy consumption behavior on multicore processors. We choose the lattice-Boltzmann method (LBM) on an Intel Sandy Bridge cluster as a prototype scenario to investigate if and how single-chip performance and power characteristics can be generalized to the highly parallel case. First we perform an analysis of a sparse-lattice LBM implementation for complex geometries. Using a single-core performance model, we predict the intra-chip saturation characteristics and the optimal operating point in terms of energy to solution as a function of implementation details, clock frequency, vectorization, and number of active cores per chip. We show that high single-core performance and a correct choice of the number of active cores per chip are the essential optimizations for lowest energy to solution at minimal performance degradation. Then we extrapolate to the MPI-parallel level and quantify the energy-saving potential of various optimizations and execution modes, where we find these guidelines to be even more important, especially when communication overhead is non-negligible. In our setup we could achieve energy savings of 35% in this case, compared to a naive approach. We also demonstrate that a simple non-reflective reduction of the clock speed leaves most of the energy saving potential unused.
قيم البحث
اقرأ أيضاً
Lattice Boltzmann methods (LBM) are an important part of current computational fluid dynamics (CFD). They allow easy implementations and boundary handling. However, competitive time to solution not only depends on the choice of a reasonable method, b
ut also on an efficient implementation on modern hardware. Hence, performance optimization has a long history in the lattice Boltzmann community. A variety of options exists regarding the implementation with direct impact on the solver performance. Experimenting and evaluating each option often is hard as the kernel itself is typically embedded in a larger code base. With our suite of lattice Boltzmann kernels we provide the infrastructure for such endeavors. Already included are several kernels ranging from simple to fully optimized implementations. Although these kernels are not fully functional CFD solvers, they are equipped with a solid verification method. The kernels may act as an reference for performance comparisons and as a blue print for optimization strategies. In this paper we give an overview of already available kernels, establish a performance model for each kernel, and show a comparison of implementations and recent architectures.
This paper has been withdrawn by the author
With the advent of increasingly complex hardware in real-time embedded systems (processors with performance enhancing features such as pipelines, cache hierarchy, multiple cores), many processors now have a set-associative L2 cache. Thus, there is a
need for considering cache hierarchies when validating the temporal behavior of real-time systems, in particular when estimating tasks worst-case execution times (WCETs). To the best of our knowledge, there is only one approach for WCET estimation for systems with cache hierarchies [Mueller, 1997], which turns out to be unsafe for set-associative caches. In this paper, we highlight the conditions under which the approach described in [Mueller, 1997] is unsafe. A safe static instruction cache analysis method is then presented. Contrary to [Mueller, 1997] our method supports set-associative and fully associative caches. The proposed method is experimented on medium-size and large programs. We show that the method is most of the time tight. We further show that in all cases WCET estimations are much tighter when considering the cache hierarchy than when considering only the L1 cache. An evaluation of the analysis time is conducted, demonstrating that analysing the cache hierarchy has a reasonable computation time.
The A64FX CPU is arguably the most powerful Arm-based processor design to date. Although it is a traditional cache-based multicore processor, its peak performance and memory bandwidth rival accelerator devices. A good understanding of its performance
features is of paramount importance for developers who wish to leverage its full potential. We present an architectural analysis of the A64FX used in the Fujitsu FX1000 supercomputer at a level of detail that allows for the construction of Execution-Cache-Memory (ECM) performance models for steady-state loops. In the process we identify architectural peculiarities that point to viable generic optimization strategies. After validating the model using simple streaming loops we apply the insight gained to sparse matrix-vector multiplication (SpMV) and the domain wall (DW) kernel from quantum chromodynamics (QCD). For SpMV we show why the CRS matrix storage format is not a good practical choice on this architecture and how the SELL-C-sigma format can achieve bandwidth saturation. For the DW kernel we provide a cache-reuse analysis and show how an appropriate choice of data layout for complex arrays can realize memory-bandwidth saturation in this case as well. A comparison with state-of-the-art high-end Intel Cascade Lake AP and Nvidia V100 systems puts the capabilities of the A64FX into perspective. We also explore the potential for power optimizations using the tuning knobs provided by the Fugaku system, achieving energy savings of about 31% for SpMV and 18% for DW.
More and more massive parallel codes running on several hundreds of thousands of cores enter the computational science and engineering domain, allowing high-fidelity computations on up to trillions of unknowns for very detailed analyses of the underl
ying problems. During such runs, typically gigabytes of data are being produced, hindering both efficient storage and (interactive) data exploration. Here, advanced approaches based on inherently distributed data formats such as HDF5 become necessary in order to avoid long latencies when storing the data and to support fast (random) access when retrieving the data for visual processing. Avoiding file locking and using collective buffering, write bandwidths to a single file close to the theoretical peak on a modern supercomputing cluster were achieved. The structure of the output file supports a very fast interactive visualisation and introduces additional steering functionality.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
