اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدLow Loss and Magnetic Field-tuned Superconducting THz Metamaterial
175
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Superconducting terahertz (THz) metamaterial (MM) made from superconducting Nb film has been investigated using a continuous-wave THz spectroscopy with a superconducting split-coil magnet. The obtained quality factors of the resonant modes at 132 GHz and 450 GHz are about three times as large as those calculated for a metal THz MM operating at 1 K, which indicates that superconducting THz MM is a very nice candidate to achieve low loss performance. In addition, the magnetic field-tuning on superconducting THz MM is also demonstrated, which offer an alternative tuning method apart from the existed electric, optical and thermal tuning on THz MM.
قيم البحث
اقرأ أيضاً
We report single and multiband linear polarizers for terahertz (THz) frequencies using cut-wire metamaterials (MM). The MMs are designed by finite element method, fabricated by electron beam lithography, and characterized by THz time-domain spectrosc
opy. The MM unit cells consist of single or multiple length cut-wire pads of gold on semi-insulating Gallium Arsenide for single or multiple band polarizers. The dependence of the resonance frequency of the single band polarizer on the length of the cut-wires is explained based a transmission line model.
We show that waveguides with a dielectric core and a lossy metamaterial cladding (metamaterial-dielectric guides) can support hybrid ordinary-surface modes previously only known for metal-dielectric waveguides. These hybrid modes are potentially usef
ul for frequency filtering applications as sharp changes in field attenuation occur at tailorable frequencies. Our results also show that the surface modes of a metamaterial-dielectric waveguide with comparable electric and magnetic losses can be less lossy than the surface modes of an analogous metal-dielectric waveguide with electric losses alone. Through a characterization of both slab and cylindrical metamaterial-dielectric guides, we find that the surface modes of the cylindrical guides show promise as candidates for all-optical control of low-intensity pulses.
We report on a method and an associated open source software, Fit@TDS, working on an average personal computer. The method is based on the fitting of a time-trace data of a terahertz time-domain-spectroscopy system enabling the retrieval of the refra
ctive index of a dielectric sample and the resonance parameters of a metasurface (quality factor, absorption losses, etc.). The software includes commonly used methods where the refractive index is extracted from frequency domain data. However, these methods are limited, for instance in case of a high noise level or when an absorption peak saturates the absorption spectrum bringing the signal to the noise level. Our software allows to use a new method where the refractive indices are directly fitted from the time-trace. The idea is to model a material or a metamaterial through parametric physical models (Drude-Lorentz model and time-domain coupled mode theory) and to implement the subsequent refractive index in the propagation model to simulate the time-trace. Then, an optimization algorithm is used to retrieve the parameters of the model corresponding to the studied material/metamaterial. In this paper, we explain the method and test it on fictitious samples to probe the feasibility and reliability of the proposed model. Finally, we used Fit@TDS on real samples of high resistivity silicon, lactose and gold metasurface on quartz to show the capacity of our method
We present a complementary THz metasurface realised with Niobium thin film which displays a quality factor Q=54 and a fully switchable behaviour as a function of the temperature. The switching behaviour and the high quality factor are due to a carefu
l design of the metasurface aimed at maximising the ohmic losses when the Nb is above the critical temperature and minimising the radiative coupling. The superconductor allows the operation of the cavity with an high Q and inductive elements with an high aspect ratio. Comparison with three dimensional finite element simulations highlights the crucial role of the inductive elements and of the kinetic inductance of the Cooper pairs in achieving the high quality factor and the high field enhancement.
The optical properties of some nanomaterials can be controlled by an external magnetic field, providing active functionalities for a wide range of applications, from single-molecule sensing to nanoscale nonreciprocal optical isolation. Materials with
broadband tunable magneto-optical response are therefore highly desired for various components in next-generation integrated photonic nanodevices. Concurrently, hyperbolic metamaterials received a lot of attention in the past decade since they exhibit unusual properties that are rarely observed in nature and provide an ideal platform to control the optical response at the nanoscale via careful design of the effective permittivity tensor, surpassing the possibilities of conventional systems. Here, we experimentally study magnetic circular dichroism in a metasurface made of type-II hyperbolic nanoparticles on a transparent substrate. Numerical simulations confirm the experimental findings, and an analytical model is established to explain the physical origin of the observed magneto-optical effects, which can be described in terms of the coupling of fundamental electric and magnetic dipole modes with an external magnetic field. Our system paves the way for the development of nanophotonic active devices combining the benefits of sub-wavelength light manipulation in hyperbolic metamaterials supporting a large density of optical states with the ability to freely tune the magneto-optical response via control over the anisotropic permittivity of the system.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
