ترغب بنشر مسار تعليمي؟ اضغط هنا

AC Conductance in Dense Array of the Ge$_{0.7}$Si$_{0.3}$ Quantum Dots in Si

82   0   0.0 ( 0 )
 نشر من قبل Ivan Smirnov
 تاريخ النشر 2005
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Complex AC-conductance, $sigma^{AC}$, in the systems with dense Ge$_{0.7}$Si$_{0.3}$ quantum dot (QD) arrays in Si has been determined from simultaneous measurements of attenuation, $DeltaGamma=Gamma(H)-Gamma(0)$, and velocity, $Delta V /V=(V(H)-V(0)) / V(0)$, of surface acoustic waves (SAW) with frequencies $f$ = 30-300 MHz as functions of transverse magnetic field $H leq$ 18 T in the temperature range $T$ = 1-20 K. It has been shown that in the sample with dopant (B) concentration 8.2$ times 10^{11}$ cm$^{-2}$ at temperatures $T leq$4 K the AC conductivity is dominated by hopping between states localized in different QDs. The observed power-law temperature dependence, $sigma_1(H=0)propto T^{2.4}$, and weak frequency dependence, $sigma_1(H=0)propto omega^0$, of the AC conductivity are consistent with predictions of the two-site model for AC hopping conductivity for the case of $omega tau_0 gg $1, where $omega=2pi f$ is the SAW angular frequency and $tau_0$ is the typical population relaxation time. At $T >$ 7 K the AC conductivity is due to thermal activation of the carriers (holes) to the mobility edge. In intermediate temperature region 4$ < T<$ 7 K, where AC conductivity is due to a combination of hops between QDs and diffusion on the mobility edge, one succeeded to separate both contributions. Temperature dependence of hopping contribution to the conductivity above $T^*sim$ 4.5 K saturates, evidencing crossover to the regime where $omega tau_0 < $1. From crossover condition, $omega tau_0(T^*)$ = 1, the typical value, $tau_0$, of the relaxation time has been determined.



قيم البحث

اقرأ أيضاً

We define single quantum dots of lengths varying from 60 nm up to nearly half a micron in Ge-Si core-shell nanowires. The charging energies scale inversely with the quantum dot length between 18 and 4 meV. Subsequently, we split up a long dot into a double quantum dot with a separate control over the tunnel couplings and the electrochemical potential of each dot. Both single and double quantum dot configurations prove to be very stable and show excellent control over the electrostatic environment of the dots, making this system a highly versatile platform for spin-based quantum computing.
A consistent approach in forming the 0.7 structure by using a quantum dot rather than a quantum point contact is demonstrated. With this scheme, it was possible to tune on and off the 0.7 structure. The 0.7 structure continuously evolved into a norma l integer conductance plateau by varying the tuning condition. Unlike the conventional 0.7 plateau, the new 0.7 structure was observed even at low electron temperatures down to 100 mK, with unprecedented flatness. From our results, it is concluded that electron interference should be taken into consideration to explain the 0.7 structure.
The terahertz spectra of the dynamic conductivity and radiation absorption coefficient in germanium-silicon heterostructures with arrays of Ge hut clusters (quantum dots) have been measured for the first time in the frequency range of 0.3-1.2 THz at room temperature. It has been found that the effective dynamic conductivity and effective radiation absorption coefficient in the heterostructure due to the presence of germanium quantum dots in it are much larger than the respective quantities of both the bulk Ge single crystal and Ge/Si(001) without arrays of quantum dots. The possible microscopic mechanisms of the detected increase in the absorption in arrays of quantum dots have been discussed.
Enhancement-mode Si/SiGe electron quantum dots have been pursued extensively by many groups for revEdit{their} potential in quantum computing. Most of the reported dot designs utilize multiple metal-gate layers and use Si/SiGe heterostructures with G e concentration close to 30%. Here we report the fabrication and low-temperature characterization of quantum dots in Si/Si$_{0.8}$Ge$_{0.2}$ heterostructures using only one metal-gate layer. We find that the threshold voltage of a channel narrower than 1 $mu$m increases as the width decreases. The higher threshold can be attributed to the combination of quantum confinement and disorder. We also find that the lower Ge ratio used here leads to a narrower operational gate bias range. The higher threshold combined with the limited gate bias range constrains the device design of lithographic quantum dots. We incorporate such considerations in our device design and demonstrate a quantum dot that can be tuned from a single dot to a double dot. The device uses only a single metal-gate layer, greatly simplifying device design and fabrication.
We propose a setup for universal and electrically controlled quantum information processing with hole spins in Ge/Si core/shell nanowire quantum dots (NW QDs). Single-qubit gates can be driven through electric-dipole-induced spin resonance, with spin -flip times shorter than 100 ps. Long-distance qubit-qubit coupling can be mediated by the cavity electric field of a superconducting transmission line resonator, where we show that operation times below 20 ns seem feasible for the entangling square-root-of-iSWAP gate. The absence of Dresselhaus spin-orbit interaction (SOI) and the presence of an unusually strong Rashba-type SOI enable precise control over the transverse qubit coupling via an externally applied, perpendicular electric field. The latter serves as an on-off switch for quantum gates and also provides control over the g factor, so single- and two-qubit gates can be operated independently. Remarkably, we find that idle qubits are insensitive to charge noise and phonons, and we discuss strategies for enhancing noise-limited gate fidelities.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا