اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAn Optical Ultrahigh Resolution Spectrograph for Use with Adaptive Optics
50
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
A prototype ultrahigh resolution spectrograph has been built with an adaptive optics telescope. It provides $250,000$ resolving power, 300 AA wavelength coverage and 0.8% efficiency.
قيم البحث
اقرأ أيضاً
A prototype cross-dispersed optical echelle spectrograph of very high resolution has been designed and built at Steward Observatory and tested at the Starfire Optical Range (SOR) 1.5 m telescope. It is the first spectrograph to take advantage of diff
raction-limited images provided by adaptive optics in order to achieve a potential resolving power of $R sim 600,000$. The wavelength coverage in a single exposure is about 300 AA, which is approximately 100 times that of conventional spectrographs operating at comparable resolution. This was achieved by recording 60 cross-dispersed orders across the $18times 18$ mm$^2$ area of the CCD detector. The total efficiency of the system, including the sky and telescope transmission, spectrograph and CCD detector, is measured to be 1.3% at peak, much higher than that of other ultra-high-resolution spectrographs. Sample stellar spectra with $R sim 250,000$ are presented.
We present the Phase A Science Case for the Multi-conjugate Adaptive-optics Visible Imager-Spectrograph (MAVIS), planned for the Adaptive Optics Facility (AOF) of the Very Large Telescope (VLT). MAVIS is a general-purpose instrument for exploiting th
e highest possible angular resolution of any single optical telescope available in the next decade, either on Earth or in space, and with sensitivity comparable to (or better than) larger aperture facilities. MAVIS uses two deformable mirrors in addition to the deformable secondary mirror of the AOF, providing a mean V-band Strehl ratio of >10% (goal >15%) across a relatively large (30 arc second) science field. This equates to a resolution of <20mas at 550nm - comparable to the K-band diffraction limit of the next generation of extremely large telescopes, making MAVIS a genuine optical counterpart to future IR-optimised facilities like JWST and the ELT. Moreover, MAVIS will have unprecedented sky coverage for a high-order AO system, accessing at least 50% of the sky at the Galactic Pole, making MAVIS a truly general purpose facility instrument. As such, MAVIS will have both a Nyquist-sampled imager (30x30 arcsec field), and a powerful integral field spectrograph with multiple spatial and spectral modes spanning 370-1000nm. This science case presents a distilled set of thematically linked science cases drawn from the MAVIS White Papers (www.mavis-ao.org/whitepapers), selected to illustrate the driving requirements of the instrument resulting from the recent MAVIS Phase A study.
Adaptive Optics (AO) is an innovative technique that substantially improves the optical performance of ground-based telescopes. The SOAR Adaptive Module (SAM) is a laser-assisted AO instrument, designed to compensate ground-layer atmospheric turbulen
ce in near-IR and visible wavelengths over a large Field of View. Here we detail our proposal to upgrade SAM, dubbed SAMplus, that is focused on enhancing its performance in visible wavelengths and increasing the instrument reliability. As an illustration, for a seeing of 0.62 arcsec at 500 nm and a typical turbulence profile, current SAM improves the PSF FWHM to 0.40 arcsec, and with the upgrade we expect to deliver images with a FWHM of $approx0.34$ arcsec -- up to 0.23 arcsec FWHM PSF under good seeing conditions. Such capabilities will be fully integrated with the latest SAM instruments, putting SOAR in an unique position as observatory facility.
Integral field spectrographs are an important technology for exoplanet imaging, due to their ability to take spectra in a high-contrast environment, and improve planet detection sensitivity through spectral differential imaging. ALES is the first int
egral field spectrograph capable of imaging exoplanets from 3-5$mu$m, and will extend our ability to characterize self-luminous exoplanets into a wavelength range where they peak in brightness. ALES is installed inside LBTI/LMIRcam on the Large Binocular Telescope, taking advantage of existing AO systems, camera optics, and a HAWAII-2RG detector. The new optics that comprise ALES are a Keplerian magnifier, a silicon lenslet array with diffraction suppressing pinholes, a direct vision prism, and calibration optics. All of these components are installed in filter wheels making ALES a completely modular design. ALES saw first light at the LBT in June 2015.
Wavelength-dispersive spectrometers (WDS) are often used in synchrotron and FEL applications where high energy resolution (in the order of eV) is important. Increasing WDS energy resolution requires increasing spatial resolution of the detectors in t
he dispersion direction. The common approaches with strip detectors or small pixel detectors are not ideal. We present a novel approach, with a sensor using rectangular pixels with a high aspect ratio (between strips and pixels, further called strixels), and strixel redistribution to match the square pixel arrays of typical ASICs while avoiding the considerable effort of redesigning ASICs. This results in a sensor area of 17.4 mm x 77 mm, with a fine pitch of 25 $mu$m in the horizontal direction resulting in 3072 columns and 176 rows. The sensors use ePix100 readout ASICs, leveraging their low noise (43 e$^-$, or 180 eV rms). We present results obtained with a Hammerhead ePix100 camera, showing that the small pitch (25 $mu$m) in the dispersion direction maximizes performance for both high and low photon occupancies, resulting in optimal WDS energy resolution. The low noise level at high photon occupancy allows precise photon counting, while at low occupancy, both the energy and the subpixel position can be reconstructed for every photon, allowing an ultrahigh resolution (in the order of 1 $mu$m) in the dispersion direction and rejection of scattered beam and harmonics. Using strixel sensors with redistribution and flip-chip bonding to standard ePix readout ASICs results in ultrahigh position resolution ($sim$1 $mu$m) and low noise in WDS applications, leveraging the advantages of hybrid pixel detectors (high production yield, good availability, relatively inexpensive) while minimizing development complexity through sharing the ASIC, hardware, software and DAQ development with existi
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
