اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMeasurement of the magnetic field direction in the NGC2024-FIR5 protostellar outflow
348
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Molecular outflows from young protostars are widely believed to be collimated by magnetic fields, but there has been little observational evidence to support this hypothesis. Using the new technique of millimetre-wavelength spectro-polarimetry, we demonstrate the existence of a magnetic field in the NGC2024-FIR5 outflow lobe. The 1.3mm J=2-1 transition of carbon monoxide (CO) is polarized at a level of approximately 1%, in a direction within 10-15 degrees of the outflow axis. This agrees with theoretical models where the magnetic field channels the outflowing gas, and shows that the process can be effective as far as 0.1pc from the protostar.
قيم البحث
اقرأ أيضاً
We present the first interferometric polarization maps of the NGC2024 FIR5 molecular core obtained with the BIMA array at approximately 2 arcsec resolution. We measure an average position angle of -60+-6 degrees in the main core of FIR5 and 54+-9 deg
rees in the eastern wing of FIR5. The morphology of the polarization angles in the main core of FIR5 suggests that the field lines are parabolic with a symmetry axis approximately parallel to the major axis of the putative disk in FIR5, which is consistent with the theoretical scenario that the gravitational collapse pulled the field lines into an hour-glass shape. The polarization percentage decreases toward regions with high intensity and close to the center of the core, suggesting that the dust alignment efficiency may decrease at high density. The plane-of-sky field strength can be estimated with the modified Chandrasekhar-Fermi formula, and the small dispersion of the polarization angles in FIR5 suggests that the magnetic field is strong ($gtrsim$ 2mG) and perhaps dominates the turbulent motions in the core.
Previous far-infrared observations at low-angular resolution have reported the presence of water associated with low-velocity outflow shocks and protostellar envelopes. The outflow driven by the intermediate-mass class 0 protostar Cep E is among the
most luminous outflows detected so far. Using the IRAM 30m telescope, we searched for and detected the para-water line emission at 183 GHz in the Cep E star-forming core. The emission arises from high-velocity gas close to the protostar, which is unresolved in the main beam of the telescope. Complementary observations at 2 resolution with the Plateau de Bure interferometer helped establish the origin of the emission detected and the physical conditions in the emitting gas. The water line profile and its spatial distribution are very similar to those of SiO. We find that the water emission arises from warm ($sim 200K$), dense ($(1-2)times 10^6cmmt$) gas, and its abundance is enhanced by one to two orders of magnitude with respect to the protostellar envelope. We detect water emission in strong shocks from the high-velocity jet at 1000 AU from the protostar. Despite the large beam size of the telescope, such emission should be detectable with Herschel.
We use the Submillimeter Array to observe, at 1.4 mm, the blue-lobe of the L1157 outflow at high spatial resolution (~ 3). We detected SiO, H_2CO, and CH_3OH lines from several molecular clumps that constitute the outflow. All three molecules were de
tected along the wall of the inner cavity that is supposedly related with the later ejection event. On the other hand, no emission was detected towards positions related to an old ejection episode, likely due to space filtering from the interferometer. The H_2CO and CH_3OH emission is detected only at velocities close to the systemic velocity. The spatial distributions of the H_2CO and CH_3OH are similar. These emission lines trace the U-shaped structure seen in the mid-infrared image. In contrast, the SiO emission is detected in wider velocity range with a peak at ~14 km s/s blue-shifted from the systemic velocity. The SiO emission is brightest at the B1 position, which corresponds to the apex of the U-shaped structure. There are two compact SiO clumps along the faint arc-like feature to the east of the U-shaped structure. At the B1 position, there are two velocity components; one is a compact clump with a size of ~1500 AU seen in the high-velocity and the other is an extended component with lower velocities. The kinematic structure at the B1 position is different from that expected in a single bow shock. It is likely that the high-velocity SiO clump at the B1 position is kinetically independent from the low-velocity gas. The line ratio between SiO (5--4) and SiO (2--1) suggests that the high velocity SiO clumps consist of high density gas of n ~ 10^5 - 10^6 cm^-3, which is comparable to the density of the bullets in the extremely high velocity (EHV) jets. It is likely that the high-velocity SiO clumps in L1157 have the same origin as the EHV bullets.
The measurement of the magnetic field in the tracking volume inside the superconducting coil of the Compact Muon Solenoid (CMS) detector under construction at CERN is done with a fieldmapper designed and produced at Fermilab. The fieldmapper uses 10
3-D B-sensors (Hall probes) developed at NIKHEF and calibrated at CERN to precision 0.05% for a nominal 4 T field. The precise fieldmapper measurements are done in 33840 points inside a cylinder of 1.724 m radius and 7 m long at central fields of 2, 3, 3.5, 3.8, and 4 T. Three components of the magnetic flux density at the CMS coil maximum excitation and the remanent fields on the steel-air interface after discharge of the coil are measured in check-points with 95 3-D B-sensors located near the magnetic flux return yoke elements. Voltages induced in 22 flux-loops made of 405-turn installed on selected segments of the yoke are sampled online during the entire fast discharge (190 s time-constant) of the CMS coil and integrated offline to provide a measurement of the initial magnetic flux density in steel at the maximum field to an accuracy of a few percent. The results of the measurements made at 4 T are reported and compared with a three-dimensional model of the CMS magnet system calculated with TOSCA.
The detection of the first electromagnetic counterpart to the binary neutron star (BNS) merger remnant GW170817 established the connection between short $gamma$-ray bursts and BNS mergers. It also confirmed the forging of heavy elements in the ejecta
(a so-called kilonova) via the r-process nucleosynthesis. The appearance of non-thermal radio and X-ray emission, as well as the brightening, which lasted more than 100 days, were somewhat unexpected. Current theoretical models attempt to explain this temporal behavior as either originating from a relativistic off-axis jet or a kilonova-like outflow. In either scenario, there is some ambiguity regarding how much energy is transported in the non-thermal electrons versus the magnetic field of the emission region. Combining the VLA (radio) and Chandra (X-ray) measurements with observations in the GeV-TeV domain can help break this ambiguity, almost independently of the assumed origin of the emission. Here we report for the first time on deep H.E.S.S. observations of GW170817 / GRB 170817A between 124 and 272 days after the BNS merger with the full H.E.S.S. array of telescopes, as well as on an updated analysis of the prompt (<5 days) observations with the upgraded H.E.S.S. phase-I telescopes. We discuss implications of the H.E.S.S. measurement for the magnetic field in the context of different source scenarios.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
