اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSHARP VIII: J0924+0219 lens mass distribution and time-delay prediction through adaptive-optics imaging
110
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Strongly lensed quasars can provide measurements of the Hubble constant ($H_{0}$) independent of any other methods. One of the key ingredients is exquisite high-resolution imaging data, such as Hubble Space Telescope (HST) imaging and adaptive-optics (AO) imaging from ground-based telescopes, which provide strong constraints on the mass distribution of the lensing galaxy. In this work, we expand on the previous analysis of three time-delay lenses with AO imaging (RXJ1131-1231, HE0435-1223, and PG1115+080), and perform a joint analysis of J0924+0219 by using AO imaging from the Keck Telescope, obtained as part of the SHARP (Strong lensing at High Angular Resolution Program) AO effort, with HST imaging to constrain the mass distribution of the lensing galaxy. Under the assumption of a flat $Lambda$CDM model with fixed $Omega_{rm m}=0.3$, we show that by marginalizing over two different kinds of mass models (power-law and composite models) and their transformed mass profiles via a mass-sheet transformation, we obtain $Delta t_{rm BA}hhat{sigma}_{v}^{-2}=6.89substack{+0.8-0.7}$ days, $Delta t_{rm CA}hhat{sigma}_{v}^{-2}=10.7substack{+1.6-1.2}$ days, and $Delta t_{rm DA}hhat{sigma}_{v}^{-2}=7.70substack{+1.0-0.9}$ days, where $h=H_{0}/100~rm km,s^{-1},Mpc^{-1}$ is the dimensionless Hubble constant and $hat{sigma}_{v}=sigma^{rm ob}_{v}/(280~rm km,s^{-1})$ is the scaled dimensionless velocity dispersion. Future measurements of time delays with 10% uncertainty and velocity dispersion with 5% uncertainty would yield a $H_0$ constraint of $sim15$% precision.
قيم البحث
اقرأ أيضاً
We present the measurement of the Hubble Constant, $H_0$, with three strong gravitational lens systems. We describe a blind analysis of both PG1115+080 and HE0435-1223 as well as an extension of our previous analysis of RXJ1131-1231. For each lens, w
e combine new adaptive optics (AO) imaging from the Keck Telescope, obtained as part of the SHARP AO effort, with Hubble Space Telescope (HST) imaging, velocity dispersion measurements, and a description of the line-of-sight mass distribution to build an accurate and precise lens mass model. This mass model is then combined with the COSMOGRAIL measured time delays in these systems to determine $H_{0}$. We do both an AO-only and an AO+HST analysis of the systems and find that AO and HST results are consistent. After unblinding, the AO-only analysis gives $H_{0}=82.8^{+9.4}_{-8.3}~rm km,s^{-1},Mpc^{-1}$ for PG1115+080, $H_{0}=70.1^{+5.3}_{-4.5}~rm km,s^{-1},Mpc^{-1}$ for HE0435-1223, and $H_{0}=77.0^{+4.0}_{-4.6}~rm km,s^{-1},Mpc^{-1}$ for RXJ1131-1231. The joint AO-only result for the three lenses is $H_{0}=75.6^{+3.2}_{-3.3}~rm km,s^{-1},Mpc^{-1}$. The joint result of the AO+HST analysis for the three lenses is $H_{0}=76.8^{+2.6}_{-2.6}~rm km,s^{-1},Mpc^{-1}$. All of the above results assume a flat $Lambda$ cold dark matter cosmology with a uniform prior on $Omega_{textrm{m}}$ in [0.05, 0.5] and $H_{0}$ in [0, 150] $rm km,s^{-1},Mpc^{-1}$. This work is a collaboration of the SHARP and H0LiCOW teams, and shows that AO data can be used as the high-resolution imaging component in lens-based measurements of $H_0$. The full time-delay cosmography results from a total of six strongly lensed systems are presented in a companion paper.
Accurate and precise measurements of the Hubble constant are critical for testing our current standard cosmological model and revealing possibly new physics. With Hubble Space Telescope (HST) imaging, each strong gravitational lens system with measur
ed time delays can allow one to determine the Hubble constant with an uncertainty of $sim 7%$. Since HST will not last forever, we explore adaptive-optics (AO) imaging as an alternative that can provide higher angular resolution than HST imaging but has a less stable point spread function (PSF) due to atmospheric distortion. To make AO imaging useful for time-delay-lens cosmography, we develop a method to extract the unknown PSF directly from the imaging of strongly lensed quasars. In a blind test with two mock data sets created with different PSFs, we are able to recover the important cosmological parameters (time-delay distance, external shear, lens mass profile slope, and total Einstein radius). Our analysis of the Keck AO image of the strong lens system RXJ1131-1231 shows that the important parameters for cosmography agree with those based on HST imaging and modeling within 1-$sigma$ uncertainties. Most importantly, the constraint on the model time-delay distance by using AO imaging with $0.045$resolution is tighter by $sim 50%$ than the constraint of time-delay distance by using HST imaging with $0.09$when a power-law mass distribution for the lens system is adopted. Our PSF reconstruction technique is generic and applicable to data sets that have multiple nearby point sources, enabling scientific studies that require high-precision models of the PSF.
In recent years, breakthroughs in methods and data have enabled gravitational time delays to emerge as a very powerful tool to measure the Hubble constant $H_0$. However, published state-of-the-art analyses require of order 1 year of expert investiga
tor time and up to a million hours of computing time per system. Furthermore, as precision improves, it is crucial to identify and mitigate systematic uncertainties. With this time delay lens modelling challenge we aim to assess the level of precision and accuracy of the modelling techniques that are currently fast enough to handle of order 50 lenses, via the blind analysis of simulated datasets. The results in Rung 1 and Rung 2 show that methods that use only the point source positions tend to have lower precision ($10 - 20%$) while remaining accurate. In Rung 2, the methods that exploit the full information of the imaging and kinematic datasets can recover $H_0$ within the target accuracy ($ |A| < 2%$) and precision ($< 6%$ per system), even in the presence of poorly known point spread function and complex source morphology. A post-unblinding analysis of Rung 3 showed the numerical precision of the ray-traced cosmological simulations to be insufficient to test lens modelling methodology at the percent level, making the results difficult to interpret. A new challenge with improved simulations is needed to make further progress in the investigation of systematic uncertainties. For completeness, we present the Rung 3 results in an appendix, and use them to discuss various approaches to mitigating against similar subtle data generation effects in future blind challenges.
Strong gravitational lenses with measured time delay are a powerful tool to measure cosmological parameters, especially the Hubble constant ($H_0$). Recent studies show that by combining just three multiply-imaged AGN systems, one can determine $H_0$
to 2.4% precision. Furthermore, the number of time-delay lens systems is growing rapidly, enabling the determination of $H_0$ to 1% precision in the near future. However, as the precision increases it is important to ensure that systematic errors and biases remain subdominant. For this purpose, challenges with simulated datasets are a key component in this process. Following the experience of the past challenge on time delay, where it was shown that time delays can indeed be measured precisely and accurately at the sub-percent level, we now present the Time Delay Lens Modeling Challenge (TDLMC). The goal of this challenge is to assess the present capabilities of lens modeling codes and assumptions and test the level of accuracy of inferred cosmological parameters given realistic mock datasets. We invite scientists to model a set of simulated HST observations of 50 mock lens systems. The systems are organized in rungs, with the complexity and realism increasing going up the ladder. The goal of the challenge is to infer $H_0$ for each rung, given the HST images, the time delay, and stellar velocity dispersion of the deflector for a fixed background cosmology. The TDLMC challenge starts with the mock data release on 2018 January 8th. The deadline for blind submission is different for each rung. The deadline for Rung 0-1 is 2018 September 8; the deadline for Rung 2 is 2019 April 8 and the one for Rung 3 is 2019 September 8. This first paper gives an overview of the challenge including the data design, and a set of metrics to quantify the modeling performance and challenge details.
Strongly lensed explosive transients such as supernovae, gamma-ray bursts, fast radio bursts, and gravitational waves are very promising tools to determine the Hubble constant ($H_0$) in the near future in addition to strongly lensed quasars. In this
work, we show that the transient nature of the point source provides an advantage over quasars: the lensed host galaxy can be observed before or after the transients appearance. Therefore, the lens model can be derived from images free of contamination from bright point sources. We quantify this advantage by comparing the precision of a lens model obtained from the same lenses with and without point sources. Based on Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) observations with the same sets of lensing parameters, we simulate realistic mock datasets of 48 quasar lensing systems (i.e., adding AGN in the galaxy center) and 48 galaxy-galaxy lensing systems (assuming the transient source is not visible but the time delay and image positions have been or will be measured). We then model the images and compare the inferences of the lens model parameters and $H_0$. We find that the precision of the lens models (in terms of the deflector mass slope) is better by a factor of 4.1 for the sample without lensed point sources, resulting in an increase of $H_0$ precision by a factor of 2.9. The opportunity to observe the lens systems without the transient point sources provides an additional advantage for time-delay cosmography over lensed quasars. It facilitates the determination of higher signal-to-noise stellar kinematics of the main deflector, and thus its mass density profile, which in turn plays a key role in breaking the mass-sheet degeneracy and constraining $H_0$.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
