اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدEmbedded vs. External Controllers in Software-Defined IoT Networks
354
0
0.0
(
0
)
نشر من قبل
Michael Baddeley Dr
تاريخ النشر
2021
مجال البحث
الهندسة المعلوماتية
والبحث باللغة
English
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The flexible and programmable architectural model offered by Software-Defined Networking (SDN) has re-imagined modern networks. Supported by powerful hardware and high-speed communications between devices and the controller, SDN provides a means to virtualize control functionality and enable rapid network reconfiguration in response to dynamic application requirements. However, recent efforts to apply SDNs centralized control model to the Internet of Things (IoT) have identified significant challenges due to the constraints faced by embedded low-power devices and networks that reside at the IoT edge. In particular, reliance on external SDN controllers on the backbone network introduces a performance bottleneck (e.g., latency). To this end, we advocate a case for supporting Software-Defined IoT networks through the introduction of lightweight SDN controllers directly on the embedded hardware. We firstly explore the performance of two popular SDN implementations for IoT mesh networks, $mu$SDN and SDN-WISE, showing the former demonstrates considerable gains over the latter. We consequently employ $mu$SDN to conduct a study of embedded vs. external SDN controller performance. We highlight how the advantage of an embedded controller is reduced as the network scales, and quantify a point at which an external controller should be used for larger networks.
قيم البحث
اقرأ أيضاً
In this paper, we propose a distributed OpenFlow controller and an associated coordination framework that achieves scalability and reliability even under heavy data center loads. The proposed framework, which is designed to work with all existing Ope
nFlow controllers with minimal or no required changes, provides support for dynamic addition and removal of controllers to the cluster without any interruption to the network operation. We demonstrate performance results of the proposed framework implemented over an experimental testbed that uses controllers running Beacon.
Time-sensitive wireless networks are an important enabling building block for many emerging industrial Internet of Things (IoT) applications. Quick prototyping and evaluation of time-sensitive wireless technologies are desirable for R&D efforts. Soft
ware-defined radio (SDR), by allowing wireless signal processing on a personal computer (PC), has been widely used for such quick prototyping efforts. Unfortunately, because of the textit{uncontrollable delay} between the PC and the radio board, SDR is generally deemed not suitable for time-sensitive wireless applications that demand communication with low and deterministic latency. For a rigorous evaluation of its suitability for industrial IoT applications, this paper conducts a quantitative investigation of the synchronization accuracy and end-to-end latency achievable by an SDR wireless system. To this end, we designed and implemented a time-slotted wireless system on the Universal Software Radio Peripheral (USRP) SDR platform. We developed a time synchronization mechanism to maintain synchrony among nodes in the system. To reduce the delays and delay jitters between the USRP board and its PC, we devised a {textit{Just-in-time}} algorithm to ensure that packets sent by the PC to the USRP can reach the USRP just before the time slots they are to be transmitted. Our experiments demonstrate that $90%$ ($100%$) of the time slots of different nodes can be synchronized and aligned to within $ pm 0.5$ samples or $ pm 0.05mu s$ ($ pm 1.5$ samples or $ pm 0.15mu s$), and that the end-to-end packet delivery latency can be down to $3.75ms$. This means that SDR-based solutions can be applied in a range of IIoT applications that require tight synchrony and moderately low latency, e.g., sensor data collection, automated guided vehicle (AGV) control, and Human-Machine-Interaction (HMI).
Based on software-defined principles, we propose a holistic architecture for Cyberphysical Systems (CPS) and Internet of Things (IoT) applications, and highlight the merits pertaining to scalability, flexibility, robustness, interoperability, and cyb
er security. Our design especially capitalizes on the computational units possessed by smart agents, which may be utilized for decentralized control and in-network data processing. We characterize the data flow, communication flow, and control flow that assimilate a set of components such as sensors, actuators, controllers, and coordinators in a systemic programmable fashion. We specifically aim for distributed and decentralized decision-making by spreading the control over several hierarchical layers. In addition, we propose a middleware layer to encapsulate units and services for time-critical operations in highly dynamic environments. We further enlist a multitude of vulnerabilities to cyberattacks, and integrate software-defined solutions for enabling resilience, detection, and recovery. In this purview, several controllers cooperate to identify and respond to security threats and abnormal situations in a self-adjusting manner. Last, we illustrate numerical simulations in support of the virtues of a software-defined design for CPS and IoT.
Many of the video streaming applications in todays Internet involve the distribution of content from a CDN source to a large population of interested clients. However, widespread support of IP multicast is unavailable due to technical and economical
reasons, leaving the floor to application layer multicast which introduces excessive delays for the clients and increased traffic load for the network. This paper is concerned with the introduction of an SDN-based framework that allows the network controller to not only deploy IP multicast between a source and subscribers, but also control, via a simple northbound interface, the distributed set of sources where multiple- description coded (MDC) video content is available. We observe that for medium to heavy network loads, relative to the state-of-the-art, the SDN-based streaming multicast video framework increases the PSNR of the received video significantly, from a level that is practically unwatchable to one that has good quality.
Previous research on SDN traffic engineering mostly focuses on static traffic, whereas dynamic traffic, though more practical, has drawn much less attention. Especially, online SDN multicast that supports IETF dynamic group membership (i.e., any user
can join or leave at any time) has not been explored. Different from traditional shortest-path trees (SPT) and graph theoretical Steiner trees (ST), which concentrate on routing one tree at any instant, online SDN multicast traffic engineering is more challenging because it needs to support dynamic group membership and optimize a sequence of correlated trees without the knowledge of future join and leave, whereas the scalability of SDN due to limited TCAM is also crucial. In this paper, therefore, we formulate a new optimization problem, named Online Branch-aware Steiner Tree (OBST), to jointly consider the bandwidth consumption, SDN multicast scalability, and rerouting overhead. We prove that OBST is NP-hard and does not have a $|D_{max}|^{1-epsilon}$-competitive algorithm for any $epsilon >0$, where $|D_{max}|$ is the largest group size at any time. We design a $|D_{max}|$-competitive algorithm equipped with the notion of the budget, the deposit, and Reference Tree to achieve the tightest bound. The simulations and implementation on real SDNs with YouTube traffic manifest that the total cost can be reduced by at least 25% compared with SPT and ST, and the computation time is small for massive SDN.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
