اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCombined Microwave and Laser Rayleigh Scattering Diagnostics for Pin-to-Pin Nanosecond Discharges
79
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this work, the temporal decay of electrons produced by an atmospheric pin-to-pin nanosecond discharge operating in the spark regime was measured via a combination of microwave Rayleigh scattering (MRS) and laser Rayleigh scattering (LRS). Due to the initial energy deposition of the nanosecond pulse, a variance in local gas density occurs on the timescale of electron decay. Thus, the assumption of a constant collisional frequency is no longer applicable when electron number data is extracted from the MRS measurements. To recalibrate the MRS measurements throughout the electron decay period, temporally-resolved LRS measurements of the local gas density were performed over the event duration. Local gas density was measured to be 30% of the ambient level during the later stages of electron decay and recovers at about 1 ms after the discharge. A shock front traveling approximately 500 m/s was additionally observed. Coupled with plasma volume calibration via temporally-resolved ICCD imaging, the corrected decay curves of the electron number and electron number density are presented with a measured peak electron number density of 4.5*10^15 cm^-3 and decay rate of ~ 0.1-0.35*10^7 s^-1. A hybrid MRS and LRS diagnostic technique can be applied for a broad spectrum of atmospheric-pressure microplasmas where a variation in number gas density is expected due to an energy deposition in the discharge.
قيم البحث
اقرأ أيضاً
In this work, we present an experimental study of nanosecond high-voltage discharges in a pin-to-pin electrode configuration at atmospheric conditions operating in single-pulse mode (no memory effects). Various discharge parameters, including voltage
, current, gas density, rotational/vibrational/gas temperature, and electron number density, were measured. Several different measurement techniques were used, including microwave Rayleigh scattering, laser Rayleigh scattering, optical emission spectroscopy enhanced with a nanosecond probing pulse, fast photography, and electrical parameter measurements. Spark and corona discharge regimes were studied with discharge pulse duration of 90 ns and electrode gap sizes ranging from 2 to 10 mm. The spark regime was observed for gaps < 6 mm using discharge pulse energies of 0.6-1 mJ per mm of the gap length. Higher electron number densities, total electron number per gap length, discharge currents, and gas temperatures were observed for smaller electrode gaps and larger pulse energies, reaching maximal values of about 7.5x10^15 cm-3, 3.5x10^11 electrons per mm, 22 A, and 4,000 K (at 10 us after the discharge), respectively, for a 2 mm gap and 1 mJ/mm discharge pulse energy. Initial breakdown was followed by a secondary breakdown occurring about 30-70 ns later and was associated with ignition of a cathode spot and transition of the discharge to cathodic arc. A majority of the discharge pulse energy was deposited into the gas before the secondary breakdown (85-89%). The electron number density after the ns discharge pulse decayed with a characteristic time scale of 150 ns governed by dissociative recombination and electron attachment to oxygen mechanisms. For the corona regime, substantially lower pulse energies (~0.1 mJ/mm), peak conduction current (1-2 A), and electron numbers (3-5x10^10 electrons per mm), and gas temperatures (360 K) were observed.
Pin-to-liquid discharges are investigated for the activation of liquids dedicated to agriculture applications. They are characterized through their electrical and optical properties, with a particular attention paid to their filaments and self-organi
zed patterns occurring at the liquid interface. We show how modulating their interaction with ambient air can promote the production of reactive species in liquids such as H2O2, NO2- and NO3-. The effects of the resulting plasma activated media are reported on lentils seeds.
We discuss a recipe to produce a lattice construction of fermionic phases of matter on unoriented manifolds. This is performed by extending the construction of spin TQFT via the Grassmann integral proposed by Gaiotto and Kapustin, to the unoriented p
in$_pm$ case. As an application, we construct gapped boundaries for time-reversal-invariant Gu-Wen fermionic SPT phases. In addition, we provide a lattice definition of (1+1)d pin$_-$ invertible theory whose partition function is the Arf-Brown-Kervaire invariant, which generates the $mathbb{Z}_8$ classification of (1+1)d topological superconductors. We also compute the indicator formula of $mathbb{Z}_{16}$ valued time-reversal anomaly for (2+1)d pin$_+$ TQFT based on our construction.
When a photo-diode is illuminated by a pulse train from a femtosecond laser, it generates microwaves components at the harmonics of the repetition rate within its bandwidth. The phase of these components (relative to the optical pulse train) is known
to be dependent on the optical energy per pulse. We present an experimental study of this dependence in InGaAs pin photo-diodes illuminated with ultra-short pulses generated by an Erbium-doped fiber based femtosecond laser. The energy to phase dependence is measured over a large range of impinging pulse energies near and above saturation for two typical detectors, commonly used in optical frequency metrology with femtosecond laser based optical frequency combs. When scanning the optical pulse energy, the coefficient which relates phase variations to energy variations is found to alternate between positive and negative values, with many (for high harmonics of the repetition rate) vanishing points. By operating the system near one of these vanishing points, the typical amplitude noise level of commercial-core fiber-based femtosecond lasers is sufficiently low to generate state-of-the-art ultra-low phase noise microwave signals, virtually immune to amplitude to phase conversion related noise.
We compare fits to piN elastic scattering data, based on a Chew-Mandelstam K-matrix formalism. Resonances, characterized by T-matrix poles, are compared in fits generated with and without explicit Chew-Mandelstam K-matrix poles. Diagonalization of th
e S matrix yields the eigenphase representation. While the eigenphases can vary significantly for the different parameterizations, the locations of most T-matrix poles are relatively stable.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
