اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدModelling of Interfacial Flows Based on An Explicit Volume Diffusion Concept
49
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
A novel volume of fluid model (VoF) called explicit volume diffusion (EVD) is developed for the simulation of interfacial flows, including those with turbulence and primary spray atomisation. The EVD model is derived by volume averaging the VoF equations over a physically-defined length scale. This introduces unclosed sub-volume flux, sub-volume stress and volume averaged surface tension force. Sub-volume fluctuations arise due to both turbulent motions and other interface dynamics which can, in general, occur in both laminar and turbulent flows. Both of these types of fluctuations are attenuated by the volume averaging process. The sub-volume flux is closed by a gradient diffusion model and involves an explicit volume diffusion coefficient that is linked to the physical length scale. The sub-volume stress closure introduces an explicit volume viscosity augmented by turbulent viscosity in turbulent flows. The volume averaged surface tension force closure is based on fractal properties of wrinkled sub-volume interfaces. These closures are evaluated through a priori analysis of resolved flow simulations for a series of two-dimensional laminar and three-dimensional turbulent interfacial shear flows. Subsequently, full EVD simulations are validated for these shear flows and for a laboratory airblast spray jet. Numerical convergence is demonstrated by keeping the physical length scale constant while reducing the numerical grid size so that numerical diffusion diminishes and becomes overwhelmed by the explicit volume diffusion. A sensitivity analysis is also conducted for variations in the physical length scale, which is compared to the boundary layer thickness on the light fluid side of the interface.
قيم البحث
اقرأ أيضاً
Superhydrophobic surfaces demonstrate promising potential for skin friction reduction in naval and hydrodynamic applications. Recent developments of superhydrophobic surfaces aiming for scalable applications use random distribution of roughness, such
as spray coating and etched process. However, most of previous analyses of the interaction between flows and superhydrophobic surfaces studied periodic geometries that are economically feasible only in lab-scale experiments. We conduct direct numerical simulations of turbulent flows over randomly patterned interfaces considering a range of texture widths $w^+approx 4-26$, and solid fractions $phi_s=11%$ to $25%$. Slip and no-slip boundary conditions are implemented in a pattern, modeling the presence of gas-liquid interfaces and solid elements. Our results indicate that slip of randomly distributed textures under turbulent flows are about $30%$ less than those of surfaces with aligned features of the same size. In the small texture size limit $w^+approx 4$, the slip length of the randomly distributed textures in turbulent flows is well described by a previously introduced Stokes flow solution of randomly distributed shear-free holes. By comparing DNS results for patterned slip and no-slip boundary against the corresponding homogenized slip length boundary conditions, we show that turbulent flows over randomly distributed posts can be represented by an isotropic slip length in streamwise and spanwise direction. The average pressure fluctuation on gas pocket is similar to that of the aligned features with the same texture size and gas fraction, but the maximum interface deformation at the leading edge of the roughness element is about twice larger when the textures are randomly distributed.
An original experimental setup has been elaborated in order to get a better view of turbulent flows in a von Karman geometry. The availability of a very fast camera allowed to follow in time the evolution of the flows. A surprising finding is that th
e development of smaller whorls ceases earlier than expected and the aspect of the flows remains the same above Reynolds number of a few thousand. This fact provides an explanation of the constancy of the reduced dissipation in the same range without the need of singularity. Its cause could be in relation with the same type of behavior observed in a rotating frame.
Embedding geometries in structured grids allows a simple treatment of complex objects in fluid flows. Various methods are available. The commonly used Brinkman-volume-penalization models geometries as porous media, where in the limit of vanishing por
osity a solid object is approximated. In the simplest form, the velocity equations are augmented by a term penalizing the fluid velocity, the body velocity. yielding good results in many applications. However, it induces numerical stiffness, especially if high pressure gradients need to be balanced. Here, we focus on the effect of the reduced effective volume (commonly called porosity) of the porous medium. An approach is derived, which allows to reduce the flux through objects to practically zero with little increase of numerical stiffness. Also, non-slip boundary conditions and adiabatic boundary conditions are easily constructed. The porosity terms allow to keep the skew symmetry of the underlying numerical scheme, by which the numerical stability is improved. Furthermore, a very good conservation of mass and energy in the non-penalized domain can be achieved. The scheme is tested for acoustic scenarios, near incompressible and strongly compressible flows.
An analytical solution is proposed to predict the crown propagation, generated by a single droplet impact on wetted walls. This approach enables a smooth transition from the inertia-driven to the viscous-controlled regime of crown propagation. The mo
delling strategy is based on the stagnation-point flow, because it resembles closely the hydrodynamic flow in the lamella and offers two main advantages. First, it allows a simple estimation of the wall-film thinning rate, caused by the impulse transfer from the impacting droplet to the wall film. Second, thanks to the self-similarity of the solution, it enables a straightforward estimation of momentum losses during film spreading along the wall. By incorporating this estimation into existing inviscid models, an excellent agreement with experiments is found during the entire crown elevation phase. In general, the analysis shows that momentum losses due to viscous effects cannot be neglected during a significant portion of crown propagation, particularly for thin wall films. The proposed methodology paves the way for predicting the inception of crown bottom breakup (CBB). In this case, the crown lamella disintegrates directly at its base due to the spontaneous creation of holes that create a web-like structure in the lamella prior to its break-up. Our theoretical analysis shows that this premature break-up of the crown lamella is associated to local instability effects, caused by the unbalance between inertial forces and surface tension.
We study transport of a weakly diffusive pollutant (a passive scalar) by thermoconvective flow in a fluid-saturated horizontal porous layer heated from below under frozen parametric disorder. In the presence of disorder (random frozen inhomogeneities
of the heating or of macroscopic properties of the porous matrix), spatially localized flow patterns appear below the convective instability threshold of the system without disorder. Thermoconvective flows crucially effect the transport of a pollutant along the layer, especially when its molecular diffusion is weak. The effective (or eddy) diffusivity also allows to observe the transition from a set of localized currents to an almost everywhere intense global flow. We present results of numerical calculation of the effective diffusivity and discuss them in the context of localization of fluid currents and the transition to a global flow. Our numerical findings are in a good agreement with the analytical theory we develop for the limit of a small molecular diffusivity and sparse domains of localized currents. Though the results are obtained for a specific physical system, they are relevant for a broad variety of fluid dynamical systems.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
