اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMicrometer-thick, atomically random SiGeSn for silicon-integrated infrared optoelectronics
221
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
A true monolithic infrared photonics platform is within the reach if strain and bandgap energy can be independently engineered in SiGeSn semiconductors. However, this Si-compatible family of group-IV semiconductors is typically strained and inherently metastable, making the epitaxial growth fraught with extended defects and compositional gradients. Herein, we controlled the growth kinetics to achieve epitaxial Si0.06Ge0.90Sn0.04 layers lattice-matched to a Ge on Si substrate, with a uniform content and a thickness up to 1.5 {mu}m. Atomic-level studies demonstrated high crystalline quality and uniform composition and confirmed the absence of short-range ordering and clusters. Moreover, these layers exhibit n-type conductivity that is in striking difference to the commonly observed p-type behavior in GeSn and SiGeSn alloys. Room temperature spectroscopic ellipsometry and transmission measurements showed the enhanced direct bandgap absorption at 0.83 eV and a reduced indirect bandgap absorption at lower energies. Si0.06Ge0.90Sn0.04 photoconductive devices exhibit a dark current similar to that of Ge devices and a slightly higher room-temperature spectral responsivity reaching 1 A/W above 0.82 eV (i.e. below 1.5 {mu}m wavelengths). These results underline the enhanced performance in lattice-matched devices and pave the way to introduce SiGeSn semiconductors as building blocks to implement the long-sought-after silicon-integrated infrared optoelectronics.
قيم البحث
اقرأ أيضاً
In recent years there has been significant fundamental research into phonon polaritons, owing to their ability to compress light to extremely small dimensions, low-losses, and ability to support anisotropic propagation. In this perspective, after bri
efly reviewing the present state of mid-infrared optoelectronics, we will assess the potential of phonon-polariton based nanophotonics for infrared (3-100$mathrm{mu}$m) light sources, detectors and modulators. These will operate in the Reststrahlen region where conventional semiconductor light sources become ineffective. Drawing on the results from the past few years, we will sketch some promising paths to create such devices and we will evaluate their practical advantages and disadvantages when compared to other approaches to infrared optoelectronics.
One-dimensional (1D) materials have attracted significant research interest due to their unique quantum confinement effects and edge-related properties. Atomically thin 1D nanoribbon is particularly interesting because it is a valuable platform with
physical limits of both thickness and width. Here, we develop a catalyst-free growth method and achieves the growth of Bi2O2Se nanostructures with tunable dimensionality. Significantly, Bi2O2Se nanoribbons with thickness down to 0.65 nm, corresponding to monolayer, are successfully grown for the first time. Electrical and optoelectronic measurements show that Bi2O2Se nanoribbons possess decent performance in terms of mobility, on/off ratio, and photoresponsivity, suggesting their promising for devices. This work not only reports a new method for the growth of atomically thin nanoribbons but also provides a platform to study properties and applications of such nanoribbon materials at thickness limit.
The fabrication of high-quality organic-inorganic hybrid halide perovskite layers is the key prerequisite for the realization of high efficient photon energy harvest and electric energy conversion in their related solar cells. In this article, we rep
ort a novel fabrication technique of CH3NH3PbI3 layer based on high temperature chemical vapor reaction. CH3NH3PbI3 layers have been prepared by the reaction of PbI2 films which were deposited by pulsed laser deposition, with CH3NH3I vapor at various temperatures from 160 oC to 210 oC. X-ray diffraction patterns confirm the formation of pure phase, and photoluminescence spectra show the strong peak at around 760 nm. Scanning electron microscopy images confirm the significantly increased average grain size from nearly 1 {mu}m at low reaction temperature of 160 oC to more than 10 {mu}m at high reaction temperature of 200 oC. The solar cells were fabricated, and short-circuit current density of 15.75 mA/cm2, open-circuit voltage of 0.49 V and fill factor of 71.66% have been obtained.
Due to the inherent in-direct bandgap nature of Silicon, heterogeneous integration of semiconductor lasers on Silicon on Insulator (SOI) is crucial for next-generation on-chip optical interconnects. Compact, high-efficient and high-tolerant couplers
between III-V light source and silicon chips have been the challenge for photonic integrated circuit (PIC). Here, we redesign the taper adiabatic coupler with the total coupling length of only 4 {mu}m, and propose another two novel slot coupler and bridge-SWG coupler with both coupling length of 7 {mu}m, to heterogeneously integrate III-V lasers and silicon chips. We study theoretically the optical mode coupling process through the redesigned taper coupler, the final coupling results match well with the simulation in 3D-FDTD. The three compact couplers represent fundamental TE mode coupling efficiencies all over 90%, even 95.7% for bridge-SWG coupler, to the best of our knowledge, are also the shortest coupling structures (7 um). Moreover, these coupling structures also possess excellent fabrication tolerance.
Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic inte
grated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain materials. The recent demonstration of multilayer heterogeneous integration provides a practical solution and enabled the first-generation of lasers fully integrated with SiN waveguides. However a laser with high device yield and high output power at telecommunication wavelengths, where photonics applications are clustered, is still missing, hindered by large mode transition loss, nonoptimized cavity design, and a complicated fabrication process. Here, we report high-performance lasers on SiN with tens of milliwatts output through the SiN waveguide and sub-kHz fundamental linewidth, addressing all of the aforementioned issues. We also show Hertz-level linewidth lasers are achievable with the developed integration techniques. These lasers, together with high-$Q$ SiN resonators, mark a milestone towards a fully-integrated low-noise silicon nitride photonics platform. This laser should find potential applications in LIDAR, microwave photonics and coherent optical communications.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
