ترغب بنشر مسار تعليمي؟ اضغط هنا

A Volume-of-Fluid method for variable-density, two-phase flows at supercritical pressure

157   0   0.0 ( 0 )
 نشر من قبل Jordi Poblador Ibanez
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

A two-phase, low-Mach-number flow solver is proposed for variable-density liquid and gas with phase change. The interface is captured using a split Volume-of-Fluid method, which solves the advection of the reference phase, generalized for the case where the liquid velocity is not divergence-free and both phases exchange mass. A sharp interface is identified by using PLIC. Mass conservation is achieved in the limit of incompressible liquid, but not with the liquid compressibility and mass exchange. This is a relevant modeling choice for two-phase mixtures at near-critical and supercritical pressure conditions for the liquid but away from the mixture critical temperature. Under this thermodynamic environment, the dissolution of lighter gas species into the liquid phase is enhanced and vaporization or condensation can occur simultaneously at different interface locations. The numerical challenge of solving two-phase, supercritical-pressure flows is greater than simpler two-phase solvers because: a) local phase equilibrium is imposed at each interface cell to determine temperature, composition, or surface tension coefficient; b) a real-fluid thermodynamic model is used to obtain fluid properties; and c) necessary phase-wise values for certain variables are obtained via extrapolation techniques. To alleviate the increased numerical cost, the pressure Poisson equation (PPE) used to solve the low-Mach-number flow is split into a constant-coefficient implicit part and a variable-coefficient explicit part. Thus, a Fast Fourier Transform method can be used for the PPE. Various verification tests are performed to show the accuracy and viability of the present approach. The growth of surface instabilities in a binary system composed of liquid n-decane and gaseous oxygen at supercritical pressures for n-decane is analyzed. Other features of supercritical liquid injection are also shown.



قيم البحث

اقرأ أيضاً

We propose the rhoLENT method, an extension of the unstructured Level Set / Front Tracking (LENT) method, based on the collocated Finite Volume equation discretization, that recovers exact numerical stability for the two-phase momentum convection wit h a range of density ratios, namely $rho^-/rho^+in [1, 10000]$. We provide the theoretical basis for the numerical inconsistency in the collocated finite volume equation discretization of the single-field two-phase momentum convection. The cause of the numerical inconsistency lies in the way the cell-centered density is computed in the new time step ($rho_c^{n+1}$). Specifically, if $rho_c^{n+1}$ is computed from the approximation of the fluid interface at $t^{n+1}$, and it is not computed by solving a mass conservation equation (or its equivalent), the two-phase momentum convection term will automatically be inconsistently discretized. We provide the theoretical justification behind using the auxiliary mass conservation equation to stabilize flows with strong density ratios. The evaluation of the face-centered (mass flux) density we base on the fundamental principle of mass conservation, used to model the single-field density, contrary to the use of different weighted averages of cell-centered single-field densities and alternative reconstructions of the mass flux density by other contemporary methods. Implicit discretization of the two-phase momentum convection term is achieved, removing the CFL stability criterion. Numerical stability is demonstrated in terms of the relative $L_infty$ velocity error norm with realistic viscosity and strong surface tension forces. The stabilization technique in the rhoLENT method is also applicable to other two-phase flow simulation methods that utilize the collocated unstructured Finite Volume Method to discretize single-field two-phase Navier-Stokes Equations.
In this paper, we present an efficient numerical algorithm for solving the time-dependent Cahn--Hilliard--Navier--Stokes equations that model the flow of two phases with different densities. The pressure-correction step in the projection method consi sts of a Poisson problem with a modified right-hand side. Spatial discretization is based on discontinuous Galerkin methods with piecewise linear or piecewise quadratic polynomials. Flux and slope limiting techniques successfully eliminate the bulk shift, overshoot and undershoot in the order parameter, which is shown to be bound-preserving. Several numerical results demonstrate that the proposed numerical algorithm is effective and robust for modeling two-component immiscible flows in porous structures and digital rocks.
Numerical analysis of a shear layer between a cool liquid n-decane hydrocarbon and a hot oxygen gas at supercritical pressures shows that a well-defined phase equilibrium can be established. Variable properties are considered with the product of dens ity and viscosity in the gas phase showing a nearly constant result within the laminar flow region with no instabilities. Sufficiently thick diffusion layers form around the liquid-gas interface to support the case of continuum theory and phase equilibrium. While molecules are exchanged for both species at all pressures, net mass flux across the interface shifts as pressure is increased. Net vaporization occurs for low pressures while net condensation occurs at higher pressures. For a mixture of n-decane and oxygen, the transition occurs around 50 bar. The equilibrium values at the interface quickly reach their downstream asymptotes. For all cases, profiles of diffusing-advecting quantities collapse to a similar solution (i.e., function of one independent variable). Validity of the boundary layer approximation and similarity are shown in both phases for Reynolds numbers greater than 239 at 150 bar. Results for other pressures are also taken at high Reynolds numbers. Thereby, the validity of the boundary layer approximation and similarity are expected. However, at very high pressures, the similar one-dimensional profiles vary for different problem constraints.
98 - Julius Reiss 2021
Embedding geometries in structured grids allows a simple treatment of complex objects in fluid flows. Various methods are available. The commonly used Brinkman-volume-penalization models geometries as porous media, where in the limit of vanishing por osity a solid object is approximated. In the simplest form, the velocity equations are augmented by a term penalizing the fluid velocity, the body velocity. yielding good results in many applications. However, it induces numerical stiffness, especially if high pressure gradients need to be balanced. Here, we focus on the effect of the reduced effective volume (commonly called porosity) of the porous medium. An approach is derived, which allows to reduce the flux through objects to practically zero with little increase of numerical stiffness. Also, non-slip boundary conditions and adiabatic boundary conditions are easily constructed. The porosity terms allow to keep the skew symmetry of the underlying numerical scheme, by which the numerical stability is improved. Furthermore, a very good conservation of mass and energy in the non-penalized domain can be achieved. The scheme is tested for acoustic scenarios, near incompressible and strongly compressible flows.
78 - S.H. Challa , S. Dong , L.D. Zhu 2018
We present a hybrid spectral element-Fourier spectral method for solving the coupled system of Navier-Stokes and Cahn-Hilliard equations to simulate wall-bounded two-phase flows in a three-dimensional domain which is homogeneous in at least one direc tion. Fourier spectral expansions are employed along the homogeneous direction and $C^0$ high-order spectral element expansions are employed in the other directions. A critical component of the method is a strategy we developed in a previous work for dealing with the variable density/viscosity of the two-phase mixture, which makes the efficient use of Fourier expansions in the current work possible for two-phase flows with different densities and viscosities for the two fluids. The attractive feature of the presented method lies in that the two-phase computations in the three-dimensional space are transformed into a set of de-coupled two-dimensional computations in the planes of the non-homogeneous directions. The overall scheme consists of solving a set of de-coupled two-dimensional equations for the flow and phase-field variables in these planes. The linear algebraic systems for these two-dimensional equations have constant coefficient matrices that need to be computed only once and can be pre-computed. We present ample numerical simulations for different cases to demonstrate the accuracy and capability of the presented method in simulating the class of two-phase problems involving solid walls and moving contact lines.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا