ترغب بنشر مسار تعليمي؟ اضغط هنا

The soft X-ray imager on THESEUS: the transient high energy survey and early universe surveyor

81   0   0.0 ( 0 )
 نشر من قبل Enrico Bozzo
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We are entering a new era for high energy astrophysics with the use of new technology to increase our ability to both survey and monitor the sky. The Soft X-ray Imager (SXI) instrument on the THESEUS mission will revolutionize transient astronomy by using wide-field focusing optics to increase the sensitivity to fast transients by several orders of magnitude. The THESEUS mission is under Phase A study by ESA for its M5 opportunity. THESEUS will carry two large area monitors utilizing Lobster-eye (the SXI instrument) and coded-mask (the XGIS instrument) technologies, and an optical-IR telescope to provide source redshifts using multi-band imaging and spectroscopy. The SXI will operate in the soft (0.3-5 keV) X-ray band, and consists of two identical modules, each comprising 64 Micro Pore Optics and 8 large-format CMOS detectors. It will image a total field of view of 0.5 steradian instantaneously while providing arcminute localization accuracy. During the mission, the SXI will find many hundreds of transients per year, facilitating an exploration of the earliest phase of star formation and comes at a time when multi-messenger astronomy has begun to provide a new window on the universe. THESEUS will also provide key targets for other observing facilities, such as Athena and 30m class ground-based telescopes.



قيم البحث

اقرأ أيضاً

The Lynx X-ray Surveyor Mission is one of 4 large missions being studied by NASA Science and Technology Definition Teams as mission concepts to be evaluated by the upcoming 2020 Decadal Survey. By utilizing optics that couple fine angular resolution (<0.5 arcsec HPD) with large effective area (~2 m^2 at 1 keV), Lynx would enable exploration within a unique scientific parameter space. One of the primary soft X-ray imaging instruments being baselined for this mission concept is the High Definition X-ray Imager, HDXI. This instrument would achieve fine angular resolution imaging over a wide field of view (~ 22 x 22 arcmin, or larger) by using a finely-pixelated silicon sensor array. Silicon sensors enable large-format/small-pixel devices, radiation tolerant designs, and high quantum efficiency across the entire soft X-ray bandpass. To fully exploit the large collecting area of Lynx (~30x Chandra), without X-ray event pile-up, the HDXI will be capable of much faster frame rates than current X-ray imagers. The planned requirements, capabilities, and development status of the HDXI will be described.
Four NASA Science and Technology Definition Teams have been convened in order to develop and study four mission concepts to be evaluated by the upcoming 2020 Decadal Survey. The Lynx x-ray surveyor mission is one of these four large missions. Lynx wi ll couple fine angular resolution (<0.5 arcsec HPD) x-ray optics with large effective area (~2 m^2 at 1 keV), thus enabling exploration within a unique scientific parameter space. One of the primary soft x-ray imaging instruments being baselined for this mission concept is the high-definition x-ray imager, HDXI. This instrument would use a finely pixelated silicon sensor array to achieve fine angular resolution imaging over a wide field of view (~22 x 22 arcmin). Silicon sensors enable large-format/small-pixel devices, radiation tolerant designs, and high quantum efficiency across the entire soft x-ray bandpass. To fully exploit the large collecting area of Lynx (~30x Chandra), with negligible or minimal x-ray event pile-up, the HDXI will be capable of much faster frame rates than current x-ray imagers. We summarize the planned requirements, capabilities, and development status of the HDXI instrument, and associated papers in this special edition will provide further details on some specific detector options.
The Soft X-ray Imager (SXI) is one of the three instruments on board EXIST, a multi-wavelength observatory in charge of performing a global survey of the sky in hard X-rays searching for Super-massive Black Holes (Grindlay & Natalucci, these Proceedi ngs). One of the primary objectives of EXIST is also to study with unprecedented sensitivity the most unknown high energy sources in the Universe, like high redshift GRBs, which will be pointed promptly by the Spacecraft by autonomous trigger based on hard X-ray localization on board. The presence of a soft X-ray telescope with an effective area of about 950cm2 in the energy band 0.2-3 keV and extended response up to 10 keV will allow to make broadband studies from 0.1 to 600 keV. In particular, investigations of the spectra components and states of AGNs and monitoring of variability of sources, study of the prompt and afterglow emission of GRBs since the early phases, which will help to constrain the emission models and finally, help the identification of sources in the EXIST hard X-ray survey and the characterization of the transient events detected. SXI will also perform surveys: a scanning survey with sky coverage 2pi and a limiting flux of 5x10^(-14) cgs plus other serendipitous.
Over the past 16 years, NASAs Chandra X-ray Observatory has provided an unparalleled means for exploring the universe with its half-arcsecond angular resolution. Chandra studies have deepened our understanding of galaxy clusters, active galactic nucl ei, galaxies, supernova remnants, planets, and solar system objects addressing almost all areas of current interest in astronomy and astrophysics. As we look beyond Chandra, it is clear that comparable or even better angular resolution with greatly increased photon throughput is essential to address even more demanding science questions, such as the formation and subsequent growth of black hole seeds at very high redshift; the emergence of the first galaxy groups; and details of feedback over a large range of scales from galaxies to galaxy clusters. Recently, NASA Marshall Space Flight Center, together with the Smithsonian Astrophysical Observatory, has initiated a concept study for such a mission named the X-ray Surveyor. This study starts with a baseline payload consisting of a high resolution X-ray telescope and an instrument set which may include an X-ray calorimeter, a wide-field imager and a dispersive grating spectrometer and readout. The telescope would consist of highly nested thin shells, for which a number of technical approaches are currently under development, including adjustable X-ray optics, differential deposition, and modern polishing techniques applied to a variety of substrates. In many areas, the mission requirements would be no more stringent than those of Chandra, and the study takes advantage of similar studies for other large area missions carried out over the past two decades. Initial assessments indicate that such an X-ray mission is scientifically compelling, technically feasible, and worthy of a high rioritization by the next American National Academy of Sciences Decadal Survey for Astronomy and Astrophysics.
The Soft X-ray Imager (SXI) is an imaging spectrometer using charge-coupled devices (CCDs) aboard the Hitomi X-ray observatory. The SXI sensor has four CCDs with an imaging area size of $31~{rm mm} times 31~{rm mm}$ arranged in a $2 times 2$ array. C ombined with the X-ray mirror, the Soft X-ray Telescope, the SXI detects X-rays between $0.4~{rm keV}$ and $12~{rm keV}$ and covers a $38^{prime} times 38^{prime}$ field-of-view. The CCDs are P-channel fully-depleted, back-illumination type with a depletion layer thickness of $200~mu{rm m}$. Low operation temperature down to $-120~^circ{rm C}$ as well as charge injection is employed to reduce the charge transfer inefficiency of the CCDs. The functionality and performance of the SXI are verified in on-ground tests. The energy resolution measured is $161$-$170~{rm eV}$ in full width at half maximum for $5.9~{rm keV}$ X-rays. In the tests, we found that the CTI of some regions are significantly higher. A method is developed to properly treat the position-dependent CTI. Another problem we found is pinholes in the Al coating on the incident surface of the CCDs for optical light blocking. The Al thickness of the contamination blocking filter is increased in order to sufficiently block optical light.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا